DUMBORC X6 6-Channel Transmitter and Receiver User Manual

Zavedení

This manual provides detailed instructions for the DUMBORC X6 6-Channel Transmitter and its compatible receivers (X6F/X6FG). Designed for RC cars, boats, and tanks, this system features a built-in gyroscope, mixed mode capabilities, and versatile power options. Please read this manual thoroughly before operation to ensure proper use and maximize the performance of your RC system.

Co je v krabici

• X6 RC Transmitter
• 2 Receivers (X6F/X6FG)
• Sling
• Baterie (1000 mAh)

Image: Contents of the DUMBORC X6 Transmitter and Receiver kit, including the transmitter, two receivers, a battery, and a sling.

Konec produktuview

Transmitter Controls and Ports

Image: Diagram illustrating the various channels and controls on the DUMBORC X6 transmitter, including Channel 1 (Direction), Channel 2 (Throttle/Forward/Backward/Brake), Channel 3 (Control positive and negative output), Channel 4 (Tap Position), Channel 5, Channel 6 (Gyro sensitivity adjustment), Antenna, Rope, ON/OFF switch, and Battery Capacity indicator.

Obrázek: Podrobný view of the DUMBORC X6 transmitter's top panel, showing the Simulator interface/PPM signal interface, USB power supply mouth (5V only), CH1 Reverse for steering, CH1 Sub-trim for steering, CH1 EPA for steering, CH2 Reverse for throttle, CH2 Sub-trim for throttle, and CH2 EPA for throttle.

• Channel 1 (Direction): Ovládá řízení.
• Kanál 2 (škrticí klapka): Controls forward, backward, and brake functions.
• Channel 3: Provides control for positive and negative output.
• Channel 4 (Tap Position): Additional control channel.
• Channel 5: Auxiliary channel.
• Channel 6 (Gyro Sensitivity Adjustment): Knob to adjust the sensitivity of the built-in gyroscope.
• Simulator Interface / PPM Signal Interface: For connecting to simulators or external PPM devices.
• USB Power Supply Port: For temporary power supply, limited to 5V. Exceeding 5V will damage the unit.

Nastavení

Napájení ovladače

The DUMBORC X6 transmitter supports three power supply methods:

1. Dry Battery (AA): Install four 1.5V AA dry batteries into the battery compartment. Ensure correct polarity by connecting the metal terminals on the battery to the metal terminals in the compartment.
2. Lithiová baterie: Install a 2S lithium battery into the dedicated lithium battery socket. The socket features anti-reverse insertion to prevent damage from incorrect polarity.
3. USB napájecí port: Connect a USB cable to the controller's USB power supply port and a mobile power supply. Důležité: The USB power supply is limited to 5V. Supplying higher voltage will burn out the remote controller.

Image: Illustrations of the three power supply methods for the DUMBORC X6 transmitter: 4x 1.5V AA batteries, a lithium battery socket, and the USB power supply port.

Receiver with Gyro Function

The X6FG receiver includes a built-in gyroscope to assist with vehicle stability and straight-line driving. The gyro function can be adjusted and toggled:

• To enter Gyro mode or switch to normal mode, press the button on the receiver 3 times.
• To adjust the left and right compensation for direction, press the button 2 times.
• Adjust the sensitivity of the Gyro using the 6-channel knob on the transmitter.
• The green indicator light on the receiver signifies normal mode, while the purple indicator light indicates Gyro mode.
• The 6th channel knob switch can be used as a separate channel if the gyroscope function is not in use.

Image: Diagram explaining the receiver's gyro function, showing the button for mode switching and sensitivity adjustment. Includes illustrations comparing vehicle movement without gyro (W/O Gyro) and with gyro (With Gyro) for improved stability.

Návod k obsluze

Základní operace

• Ovládání řízení: Use the steering wheel on the transmitter to control the direction of your RC vehicle.
• Ovládání škrticí klapky: Use the trigger to control forward, backward, and braking. Pull the trigger for forward movement, push for brake/reverse.

Pokročilé funkce

• Smíšený režim: Each of the 3 main channels can be set independently, supporting mixed control of channels 1 and 2. This feature is beneficial for custom DIY models.
• Throttle Sensitivity Adjustment: Fine-tune the throttle sensitivity for precise control, especially useful for motor differential speed adjustments.
• Throttle/Steering Direction Switching: The direction of throttle and steering control can be reversed to suit user preferences and habits.
• Proportional Speed Change: Achieve varying speeds for forward, backward, and steering movements, allowing for different driving experiences.
• Throttle Speed Limit Adjustment: A unique feature suitable for beginners, allowing the setting of a safe speed limit for practice.

Nízký objemtage Alarm

Vysílač se vyznačuje nízkou hlasitostítage alarm (7.4V for lithium battery, 4.8V for dry battery). When the voltage drops below the threshold, the alarm will activate, indicating that the transmitter battery is low. This allows you to safely return your RC model before losing control, preventing potential loss or damage.

Steering Buckle Adjustment

The steering buckle can be adjusted for optimal comfort and control.

1. Push the steering buckle up and down.
2. Locate the slot and push it in to secure the adjustment.

Image: Diagram showing how to adjust the steering buckle on the DUMBORC X6 transmitter by pushing it up/down and then into a slot.

Údržba

• Keep the transmitter and receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Nevystavujte jednotky extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
• When not in use for extended periods, remove batteries from the transmitter to prevent leakage.
• Store the system in a dry, cool place.

Odstraňování problémů

• Bez napájení: Check battery installation and charge level. Ensure correct battery type is used. If using USB, confirm 5V supply.
• Loss of Control/Short Range: Ensure the transmitter and receiver are properly bound. Check for interference from other 2.4GHz devices. Verify control distance is within the specified 400-500 meters.
• Nízký objemtage Alarm: Replace or recharge the transmitter battery immediately.
• Gyro Not Functioning Correctly: Ensure the receiver is in Gyro mode (purple indicator light). Adjust gyro sensitivity using the 6-channel knob on the transmitter.
• Controls Reversed: Use the throttle direction / steering direction switching feature on the transmitter to correct the control orientation.

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the DUMBORC official webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi.