LEDVANCE Flash Car Emergency Light User Manual

1. Konec produktuview

The LEDVANCE Flash Car Emergency Light is a versatile mobile lighting device designed for outdoor use, particularly in emergency situations. It features a robust aluminum housing and integrates essential tools for roadside safety.

Key features include a glass hammer for breaking windows and a seat belt knife for cutting seat belts, enhancing its utility in critical moments. The light offers multiple operating modes for various lighting needs.

This product is classified as a surrounding product, meaning its included light source(s) can be disassembled for separate verification. The light source within this device is of energy efficiency class G.

Image: The LEDVANCE Flash Car Emergency Light, a compact, black, cylindrical device with a light at one end and a textured grip, designed for emergency use.

2. Bezpečnostní informace

• Bezpečnost baterie: Use only the specified battery type (4 AAA batteries). Do not mix old and new batteries, or different types of batteries. Ensure correct polarity when inserting batteries. Remove batteries if the device will not be used for an extended period.
• Nouzové nástroje: The glass hammer and seat belt knife are sharp and designed for emergency use only. Handle with extreme care to prevent injury. Keep out of reach of children.
• Světelný zdroj: Do not look directly into the light beam, as it may cause temporary vision impairment.
• Podmínky prostředí: This device is designed for outdoor use but should not be submerged in water. Avoid extreme temperatures.

3. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• 1 x LEDVANCE Flash Car Emergency Light (Model: FLASHL CAR BTRY EM FS1 LEDV)

4. Nastavení

4.1 Instalace baterie

1. Locate the battery compartment. This is typically found by twisting or unscrewing a section of the light's body.
2. Insert 4 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Bezpečně zavřete přihrádku na baterie.

5. Návod k obsluze

5.1 Přepínání režimů

The LEDVANCE Flash Car Emergency Light features a convenient button for switching between its four operating modes:

• 1. stisk: Activates bright light mode (100 lumens).
• 2. stisk: Switches to soft light mode (70 lumens).
• 3. tisk: Activates SOS mode (Morse code for SOS).
• 4. tisk: Activates flashing mode.
• Subsequent presses will cycle through the modes or turn the light off, depending on the model's specific sequence.

5.2 Adjusting Light Beam Angle

The angle of the light beam can be adjusted by turning the lens of the device. Rotate the lens clockwise or counter-clockwise to achieve the desired focus or spread of light.

5.3 Životnost baterie

The light provides approximately 1.5 hours of operation at full brightness (100 lumens) with fresh batteries.

6. Údržba

• Čištění: Otřete zařízení měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Výměna baterie: Replace all 4 AAA batteries when the light output diminishes or the device stops functioning. Refer to Section 4.1 for battery installation.
• Skladování: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

7. Řešení problémů

• Světlo se nerozsvítí:
  • Zkontrolujte, zda jsou baterie vloženy správně se správnou polaritou.
  • Vyměňte staré nebo vybité baterie za nové.
  • Ujistěte se, že je přihrádka na baterie bezpečně uzavřena.
• Světlo je tlumené nebo bliká:
  • Baterie mohou být vybité. Vyměňte baterie za nové.

8. Specifikace

9. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact LEDVANCE customer service directly. Keep your proof of purchase for warranty claims.