Olafus 65W Chytrý LED reflektor s pohybovým senzorem (Model 3-LBW65M) - Uživatelská příručka

1. Úvod

This manual provides detailed instructions for the installation, setup, and operation of your Olafus 65W Smart LED Flood Light with Motion Sensor (Model 3-LBW65M). This outdoor security light features adjustable color temperature (2700K-6500K), 6500 lumens brightness, Wi-Fi connectivity, and smart control via a mobile application, Alexa, or Google Assistant. It is designed for outdoor use with an IP65 waterproof rating and an integrated motion sensor for enhanced security and convenience.

2. Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.

• Elektrická bezpečnost: Installation must be performed by a qualified electrician or a person with sufficient knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before installation, wiring, or servicing.
• Základy: Tento výrobek musí být řádně uzemněn.
• svtage: Zajistěte napájení objtagodpovídá požadavkům produktu (120 V AC).
• Venkovní použití: This flood light is rated IP65 for outdoor use, protecting against dust and water jets. Do not submerge the unit in water.
• Montáž: Mount the fixture securely to a stable surface according to local electrical codes.
• Teplo: The LED light fixture can become hot during operation. Do not touch the light surface directly when it is on or immediately after turning it off.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• Olafus 65W Smart LED Flood Light with Motion Sensor
• Návod k použití

4. Konec produktuview

The Olafus 65W Smart LED Flood Light is designed for versatile outdoor illumination and security. It features two adjustable LED light panels and a motion sensor, allowing for broad coverage and customizable detection.

Obrázek: Přední strana view of the Olafus 65W Smart LED Flood Light, showing the two adjustable light panels, the central motion sensor, and the wiring. A smartphone screen displaying the light's control interface is shown next to it.

Dimensions and Adjustable Components

The flood light's dimensions are approximately 10.7 inches (L) x 5.6 inches (W) x 5.3 inches (H). The light panels are adjustable up to 110 degrees vertically and 335 degrees horizontally. The motion sensor can be adjusted 180 degrees vertically, allowing for precise aiming of both light and detection areas.

Image: A technical diagram illustrating the physical dimensions of the flood light in millimeters and inches, along with the adjustable angles for the light panels (110° vertical, 335° horizontal) and the motion sensor (180° vertical). Wiring connections (Live, Neutral, Ground) are also indicated.

5. Instalace

This flood light is designed for hardwired installation. Professional installation is recommended.

5.1 Kontrolní seznam před instalací

• Ujistěte se, že je jistič VYPNUTÝ.
• Gather necessary tools: screwdriver, wire nuts, electrical tape, mounting hardware (if not included or specific to your surface).
• Confirm the mounting location is suitable for outdoor use and can support the fixture's weight.

5.2 Pokyny pro zapojení

The flood light requires a standard 3-wire connection:

• Černý drát: Connect to the Live (hot) wire from your electrical supply.
• Bílý drát: Connect to the Neutral wire from your electrical supply.
• Zelený drát: Connect to the Ground wire from your electrical supply.

Secure all connections with wire nuts and electrical tape. Ensure no bare wires are exposed.

Image: A visual guide showing the hardwired installation process of the flood light onto an exterior wall. It highlights the electrical connections and the secure mounting of the fixture.

5.3 Možnosti montáže

The flood light can be mounted on various outdoor surfaces, including walls and soffits, to suit your specific lighting needs.

Obrázek: Dva bývalíamples of flood light installation: one showing the light mounted on a soffit (under an eave) and another showing it mounted directly on a wall, demonstrating versatile placement options.

6. App and Wi-Fi Setup

To unlock the smart features of your Olafus flood light, connect it to your 2.4GHz Wi-Fi network using the dedicated mobile application.

6.1 Stažení aplikace

Hledat the 'Smart Life' or 'Tuya Smart' app in your smartphone's app store (iOS or Android) and install it.

6.2 Připojení k Wi-Fi

1. Ensure your flood light is powered on.
2. Otevřete aplikaci a zaregistrujte se/přihlaste se.
3. Follow the in-app instructions to add a new device. The light may need to be put into pairing mode (often by cycling power 3 times).
4. Vyberte svou 2.4 GHz Wi-Fi síť a zadejte heslo.
5. Po připojení můžete zařízení přejmenovat pro snazší ovládání.

6.3 Voice Control Integration (Alexa/Google Assistant)

After successfully connecting the light to the app, you can link it with Amazon Alexa or Google Assistant for voice control:

1. Otevřete aplikaci Alexa nebo Google Home.
2. Přejděte do sekce „Dovednosti“ nebo „Spolupracuje s Googlem“.
3. Hledat 'Smart Life' or 'Tuya Smart' and enable the skill/service.
4. Propojte svůj účet Smart Life/Tuya Smart.
5. Discover devices. Your Olafus flood light should now be controllable via voice commands.

Image: A user interacting with a smartphone and an Amazon Echo device, demonstrating voice and app control for the smart flood light. The light is shown illuminated in an outdoor setting, with icons for 2.4GHz Wi-Fi, Alexa, and Google Home compatibility.

7. Návod k obsluze

The Olafus Smart LED Flood Light offers various modes and customizable settings through the mobile application.

7.1 Provoz senzoru pohybu

The integrated motion sensor detects movement within its adjustable range and angle, triggering the light to turn on. You can customize its behavior via the app.

• Detekční úhel: Až do 180 stupňů.
• Rozsah detekce: Až 72 stop.
• Úrovně citlivosti: Adjustable (Low, Middle, High) in the app.
• Motion Off Delay: Set the duration the light stays on after motion is no longer detected (6 seconds to 60 minutes).

Image: An illustration depicting the motion detection capabilities of the flood light, showing a maximum detection range of 72 feet and a 180-degree detection angle covering a driveway and garage area.

7.2 režimy osvětlení

The flood light supports different lighting modes to suit various needs:

• Režim snímače pohybu: The light automatically turns on to 100% brightness when motion is detected and turns off after the set delay when no motion is present.
• Dim Light Mode (Weak Light Brightness): The light maintains a low brightness (e.g., 1-30%) when no motion is detected, then switches to 100% brightness upon motion detection. After the motion ceases and the delay expires, it returns to the dim light setting. The duration of the dim light can also be set (e.g., 1 minute to 8 hours).

Image: A visual comparison of two lighting modes. 'Motion Sensor Mode' shows the light turning on brightly when a car approaches a garage and turning off when it leaves. 'Dim Light Mode' shows the light staying dimly lit and brightening to 100% when a dog walks by.

7.3 Adjustable Color Temperature & Brightness

Customize the light output to your preference:

• Teplota barev: Steplessly adjust from warm white (2700K) to cool white (6500K) via the app.
• Jas: Stepless dimming from 1% to 100%.
• Funkce paměti: The light retains your last color temperature and brightness settings when powered off and on.

Image: A smartphone screen showing the app interface for adjusting the light's color temperature and brightness. The color temperature slider ranges from 2700K (warm white) to 6500K (cool white), and a brightness slider from 1% to 100% is also visible. Examples of warm and cold white light are shown on a house exterior.

7.4 Nastavení časovače

Schedule your light to turn on or off at specific times or to operate in different modes throughout the day or week.

• Set specific ON/OFF times (e.g., turn on at 8:00 PM, turn off at 6:00 AM).
• Configure delayed shutoff (e.g., light turns off after 3 hours of continuous operation).

Image: A graphic illustrating the timer setting feature, with a clock face indicating the light turning on at 8:00 PM and turning off at 6:00 AM. The flood light is shown illuminating a house exterior at night and off during the day.

7.5 Skupinová kontrola

Control multiple Olafus smart flood lights simultaneously by creating groups within the app. This allows for synchronized operation of several lights with a single command or schedule.

Image: A diagram showing three flood lights installed on different parts of a house, labeled Group 1 and Group 2. Blue lines connect them, illustrating how multiple lights can be linked and controlled together as groups from a central point, such as a smartphone app.

8. Údržba

Proper maintenance ensures the longevity and optimal performance of your flood light.

• Čištění: Svítidlo pravidelně čistěte měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Před čištěním se ujistěte, že je přístroj vypnutý.
• Vodotěsnost IP65: The light is designed to withstand rain, sleet, and snow. Ensure all seals and connections are intact after installation to maintain its waterproof integrity.
• Odvod tepla: The fixture is designed with die-cast aluminum and a fin structure for effective heat dissipation. Ensure there are no obstructions around the fixture that could impede airflow.

Image: The flood light illuminated on an exterior wall during a rain shower, demonstrating its IP65 waterproof capability.

Obrázek: Výřez view of the flood light's housing, highlighting the die-cast aluminum construction and fin structure designed for effective heat dissipation, with blue arrows indicating airflow.

9. Řešení problémů

If you encounter issues with your Olafus Smart LED Flood Light, refer to the following common problems and solutions:

10. Specifikace

11. Záruka a podpora

For warranty information and technical support, please refer to the documentation included with your product or visit the official Olafus website. Standard return policies typically apply for a period of 30 days from purchase.