Uživatelská příručka pro parafínovací stroj Teglu TMS-219

1. Úvod

Thank you for choosing the Teglu TMS-219 Paraffin Wax Machine. This device is designed to provide a moisturizing and therapeutic paraffin wax treatment for your hands, feet, and elbows in the comfort of your home. Please read this manual thoroughly before initial use to ensure safe and optimal operation.

Image 1.1: Teglu TMS-219 Paraffin Wax Machine and included accessories.

2. Bezpečnostní informace

Důležitá bezpečnostní opatření:

• Do not use this product in excessively humid indoor environments or outdoors.
• Ensure the machine is placed on a stable, heat-resistant surface during operation.
• Uchovávejte mimo dosah dětí a domácích zvířat.
• Always test the wax temperature with your finger before immersing hands or feet to prevent burns.
• Nepoužívejte stroj, pokud je poškozený napájecí kabel nebo zástrčka.
• Odpojte stroj ze zásuvky, pokud jej nepoužíváte, nebo před čištěním.
• Neponořujte stroj do vody nebo jiné kapaliny.
• Use only paraffin wax specifically designed for paraffin bath machines.
• If you have any skin conditions, open wounds, or circulatory problems, consult a medical professional before use.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1x 4000ML Paraffin Wax Machine
• 3x 450g Paraffin Wax
• 2x Thermal Hand Gloves
• 2x Thermal Foot Gloves
• 100x Plastic Hand Gloves
• 100x Plastic Foot Gloves
• 1x Silicone Brush
• 1x Heat Insulation Panel

Image 3.1: All components included in the Teglu TMS-219 Paraffin Wax Machine kit.

4. Nastavení

1. Umístění: Place the paraffin wax machine on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
2. Přidejte vosk: Open the lid and place the desired amount of paraffin wax blocks into the inner pot. The machine has a large capacity of 4000ML, suitable for hands, feet, or elbows.
3. Připojte napájení: Zapojte napájecí kabel do standardní elektrické zásuvky. Digitální displej se rozsvítí.

Image 4.1: The large inner tank (13"x7.2") accommodates hands, feet, and elbows.

5. Návod k obsluze

5.1 Melting the Wax

The Teglu TMS-219 features a 200W heating system and an aluminum liner for efficient wax melting. It can melt 3x 450g paraffin wax blocks in approximately 30 minutes.

Image 5.1: The machine melts paraffin wax quickly, typically within 30 minutes for multiple blocks.

5.2 Ovládací panel a funkce

The machine features a digital temperature/time display and touchable buttons for easy operation.

Obrázek 5.2: Konecview of the control panel and key features like the cooling fan and handles.

Převod jednotek teploty (°C/°F)

To change temperature units, press the "+" and "-" buttons simultaneously.

Image 5.3: Demonstration of temperature unit conversion.

5.3 režimy vytápění

The Teglu TMS-219 offers three distinct heating modes:

1. One-touch Smart Mode: Simply press the Power button, and the machine will automatically enter smart mode, heating to a preset optimal temperature.


Image 5.4: Activating One-touch Smart Mode.

2. Režim nastavení teploty:
   1. Stiskněte tlačítko Napájení.
   2. Press the "+" or "-" buttons to set the desired temperature (range: 86-176°F / 30-75°C). The setting is complete when the screen stops flashing.


Image 5.5: Setting the desired temperature.

3. Time Reservation Mode:
   1. Stiskněte tlačítko Napájení.
   2. Stiskněte tlačítko Timer.
   3. Press the "+" or "-" buttons to set the reservation time (1-99 hours).
   4. Finally, press the Timer button again. The setting is complete when the screen stops flashing.


Image 5.6: Setting the time reservation mode.

5.4 Usage Steps for Paraffin Treatment

1. Tavený vosk: Place paraffin wax into the pot and select a heating mode to melt it.
2. Ochladit: After the wax has fully melted, wait approximately 10 minutes for it to cool slightly. Test the temperature with your finger to ensure it is comfortable and safe for immersion.
3. Ponořit: Place the white insulation grid into the pot. Slowly immerse your hand or foot into the melted wax for about 10 seconds, then remove it. Repeat this process approximately 10 times to build up several layers of wax.
4. Pokrýt: Immediately after dipping, cover the waxed area with a plastic glove liner, then place a thermal cotton mitt over it to retain heat.
5. Relaxovat: Allow the wax to remain on your skin for about 15 minutes.
6. Odstranění vosku: Gently peel off the hardened wax. The wax should come off easily, taking dead skin cells with it.
7. Zvlhčovat: Enjoy the nourishing and moisturizing effects on your skin.

Image 5.7: Step-by-step guide for a paraffin wax treatment.

5.5 Fast Cooldown with Built-in Fan

The Teglu paraffin bath includes a built-in fan located at the bottom. This fan automatically activates once the heating cycle is complete, facilitating faster heat dissipation and reducing waiting time before the wax is ready for use.

5.6 Constant Temperature & Overheat Protection

For your safety, the machine is equipped with constant temperature control and overheat protection. If the internal temperature exceeds 75°C (167°F), the machine will automatically stop heating and maintain a constant temperature to prevent overheating.

6. Údržba

6.1 Čištění jednotky

• Před čištěním vždy odpojte stroj ze zásuvky a nechte jej zcela vychladnout.
• To remove hardened wax, turn the machine on to a low heat setting for a few minutes until the wax softens, then carefully scrape it out using a non-abrasive tool (like the included silicone brush).
• Otřete vnitřní a vnější povrchy měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
• Před uskladněním nebo dalším použitím se ujistěte, že je přístroj zcela suchý.

6.2 Skladování jednotky

• Store the machine in a cool, dry place, away from direct sunlight and moisture.
• Keep the lid closed to prevent dust accumulation.

7. Řešení problémů

• Stroj se nezapne:
  • Zkontrolujte, zda je napájecí kabel bezpečně zapojený do zařízení i do elektrické zásuvky.
  • Funkčnost zásuvky se ujistěte vyzkoušením zapojení do jiného spotřebiče.
• Wax is not melting or heating slowly:
  • Verify that the correct heating mode is selected and the temperature is set appropriately.
  • Ensure the lid is closed during the melting process to retain heat.
  • Allow sufficient time for the wax to melt (approximately 30 minutes for 3x 450g blocks).
• Wax is too hot or too cold:
  • Adjust the temperature setting using the "+" and "-" buttons.
  • Always test the wax temperature with your finger before full immersion. If too hot, allow it to cool for a few minutes.
• Chybová zpráva na displeji:
  • Refer to the specific error code (if any) in a separate troubleshooting guide or contact customer support.
  • Try unplugging the unit for 5 minutes and plugging it back in to reset.

8. Specifikace

9. Záruka a podpora

For warranty information and customer support, please refer to the documentation included with your purchase or contact Teglu customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.