Zavedení
Thank you for choosing the Cozion Infrared Heat Lamp with Stand. This device is designed to provide targeted red light and near-infrared light therapy, promoting vitality and aiding in fatigue reduction. Featuring 120 LED chips, including 660nm red light and 850nm invisible near-infrared light, this lamp offers adjustable settings and a flexible design for various applications.
Image: The Cozion Infrared Heat Lamp with Stand, illustrating its use during a meditation session. The lamp features four flexible heads emitting red light, positioned on an adjustable stand, with a remote control visible.
Bezpečnostní pokyny
- Always read all instructions before using the device.
- Do not look directly into the LED lights, especially the 850nm near-infrared lights which are invisible but still emit powerful radiation. Protective eyewear is recommended and often included.
- Udržujte zařízení mimo dosah vody nebo damp prostředí.
- Ujistěte se, že napájecí kabel není poškozený a je správně připojen k vhodné zásuvce.
- Zařízení nepoužívejte, pokud je poškozené nebo nefunkční. Požádejte o pomoc zákaznickou podporu.
- Uchovávejte mimo dosah dětí a domácích zvířat.
- This device is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease. Consult a healthcare professional for any medical conditions.
- Jáamp generates minimal heat; it is not a heating lamp. Slight warmth is normal.
Komponenty produktu
The Cozion Infrared Heat Lamp package includes the following components:
- Lamp unit with 4 flexible LED heads
- Nastavitelný stativový stojan
- Power cable with integrated control switch
- Protective eyewear (may be included)
Image: An illustration detailing the contents of the product package, including the lamp, tripod, power cable, and gift box.
Nastavení
Follow these steps to assemble your infrared heat lamp:
- Připojte Lamp to the Stand: Connect the top screw of the stand to the bottom base of the light tube. Ensure it is securely fastened.
- Otevřete stativ: Extend the legs of the tripod stand to create a stable base. Ensure the tripod is fully open and stable before proceeding.
- Upravte výšku: Loosen the height adjustment knob on the stand and extend the pole to your desired height. Tighten the knob to secure the height. The stand is adjustable from 25.6 inches to 58.7 inches.
- Position the LED Heads: Adjust the 360° rotatable gooseneck arms to direct the light to the desired area.
- Připojte napájení: Zapojte napájecí kabel do vhodné elektrické zásuvky.
Image: A visual guide demonstrating the three main steps for setting up the infrared lamp: connecting the lamp to the stand, opening the tripod, and adjusting the height.
Návod k obsluze
Jáamp is controlled via the integrated switch on the power cable. Familiarize yourself with the control functions:
Obrázek: Podrobný view z lamp's control switch, highlighting buttons for timer settings, color mode selection, brightness adjustment, and pulse mode activation.
- Zapnutí/vypnutí: Stisknutím tlačítka napájení otočte lamp zapnuto nebo vypnuto.
- Nastavení časovače: Use the timer buttons (10M, 20M, 30M, 40M, 50M, 60M) to set the desired treatment duration. The lamp se po nastavené době automaticky vypne.
- Nastavení jasu: Use the '+' and '-' buttons to increase or decrease the brightness level (from L01 minimum to L11 maximum).
- Color Switch (Wavelength Selection): Press the 'Colour switch' button to cycle through the available light modes:
- 660nm + 850nm (Red Light + Near-Infrared Light)
- 660nm (Red Light only)
- 850nm (Near-Infrared Light only)
- Režim pulzního blikání: Press the ON/OFF/Pulse Flicker button to activate or deactivate the pulsating light mode. This mode is suitable for specific treatments.
Doporučené použití: Use 1 to 2 times per day for 15 to 30 minutes. For best results, consistent use is recommended.
Údržba
- Čištění: Ensure the device is unplugged before cleaning. Wipe the lamp heads and stand with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Skladování: Uložte lamp in a cool, dry place when not in use. If disassembling for storage, ensure all components are clean and dry.
- Inspekce: Periodically inspect the power cord and lamp heads for any signs of damage. If damage is found, discontinue use and contact customer support.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lamp nezapne. | Not plugged in; power outlet issue; damaged cable/device. | Ensure power cable is securely plugged into a working outlet. Check for any visible damage to the cable or device. |
| Světla jsou slabá nebo blikají. | Brightness setting is too low; device malfunction. | Increase brightness using the '+' button on the control switch. If problem persists, contact customer support. |
| Lamp nečekaně se vypne. | Timer has expired; power interruption. | Check the timer setting. Ensure stable power supply. |
| Near-infrared (850nm) lights are not visible. | To je normální. | The 850nm wavelength is outside the visible spectrum. This is normal operation. You can often see a faint red glow or use a phone camera to confirm they are on. |
Specifikace
- Číslo modelu: HG:IL-20-01
- Značka: Cozion
- Množství LED: 120 kusy
- Vlnové délky: 660 nm (červené světlo), 850 nm (blízké infračervené světlo)
- Nastavení časovače: 10, 20, 30, 40, 50, 60 minut
- Úrovně jasu: L01 - L11
- Stand Height Adjustment: 25.6 až 58.7 palců (přibližně 65 cm až 149 cm)
- Gooseneck Rotation: 360 stupňů
- Rozměry produktu (v balení): 43.6 x 13.3 x 10.9 cm; 1.56 kilogramů
Záruka a podpora
For warranty information or technical support, please contact Cozion customer service. Refer to your purchase documentation for specific warranty terms and contact details. You can also visit the official Cozion webstránky pro další pomoc.
Zásady vrácení: The product typically comes with a 30-day return/replacement policy. Please check with your retailer for exact terms.