Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set Instruction Manual

1. Konec produktuview

The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.

Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.

Klíčové vlastnosti:

• Záznam s vysokou věrností: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
• Inteligentní redukce šumu: One-touch activation for clear voice recordings in noisy environments.
• Rozšířený bezdrátový dosah: Up to 50 meters (164 feet) of uninterrupted working range.
• Dlouhá výdrž baterie: Až 4 hodin na jedno nabití a až 48 hodin s nabíjecím pouzdrem.
• Univerzální kompatibilita: Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
• Magnetic Clip Design: Allows for versatile and secure positioning.

Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.

2. Pokyny k nastavení

2.1 Počáteční párování a připojení

The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.

1. Nabíjení zařízení: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
2. Připojte přijímač: Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
3. Zapnutí vysílače: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
4. Ověřit připojení: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.

2.2 Device Compatibility and OTG Function

The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.

• Zařízení iOS: Use the provided Type-C to Lightning adapter.
• Zařízení Android: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.

Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.

Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.

3. Návod k obsluze

3.1 Zapnutí/vypnutí

The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.

3.2 Noise Cancellation (ANC Mode)

The AM-W20 features a smart noise reduction function to minimize background interference.

• Aktivace: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
• Deaktivace: Press the yellow button again to deactivate noise cancellation.
• Automatická aktivace: Noise cancellation is active automatically when the transmitter is turned on.

Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.

3.3 Funkce ztlumení

To temporarily mute the microphone during recording:

• Aktivace/Deaktivace: Double-tap the power button on the transmitter.

Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.

3.4 Umístění mikrofonu

The AM-W20 features a magnetic clip for flexible and secure attachment.

• Magnetický nástavec: Use the magnetic clip to attach the microphone to clothing or other surfaces.
• Optimální umístění: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.

Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.

4. Údržba

4.1 Charging the Microphone Set

The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.

• Životnost baterie vysílače: Až 4 hodin na jedno nabití.
• Celková výdrž baterie s pouzdrem: Až 48 hodiny.
• Nabíjení: Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.

Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.

4.2 Čištění a skladování

• Čištění: Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
• Skladování: Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.

5. Řešení problémů

If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:

• Microphone Disconnects:
  • Ensure the receiver is securely plugged into your device.
  • Check the battery level of both the transmitter and receiver.
  • Verify that there are no significant obstacles or sources of interference within the 50-meter range.
  • U zařízení se systémem Android ověřte, zda je v nastavení telefonu povolena funkce OTG.
• Poor Audio Quality / Disturbance / Shrieking Sound:
  • Zrušení hluku: Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
  • Umístění mikrofonu: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
  • Hlasitost nahrávání: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
  • Rušení: Přesuňte se dál od jiných bezdrátových zařízení nebo silných elektromagnetických polí, která by mohla způsobovat rušení.
• Problémy s nabíjením:
  • Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
  • Vyzkoušejte jiný kabel USB-C a napájecí adaptér, abyste vyloučili vadné příslušenství.
  • Check for any debris in the charging ports of the case or devices.
• No Sound Recording (Android):
  • Enable OTG in your phone's settings.
  • Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.

6. Specifikace

7. Záruka a podpora

For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:

• Telefon: +91 9372146440
• E-mail: podpora@audioarray.in

Image: Audio Array customer support details, including phone number and email for assistance.

Uschovejte si prosím doklad o koupi pro případné reklamace.