SIHOO M59AS Ergonomic Office Chair User Manual

Zavedení

Welcome to the user manual for your new SIHOO M59AS Ergonomic Office Chair. This manual provides comprehensive instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most comfortable and supportive experience from your chair. Please read through this manual carefully before assembly and use.

Image: The SIHOO M59AS Ergonomic Office Chair, showcasing its full black mesh design and polished base.

Bezpečnostní informace

• Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou poškozené.
• Židli sestavte na měkkém a čistém povrchu, abyste zabránili poškrábání.
• Tighten all screws firmly, but do not overtighten. Periodically check and re-tighten screws as needed.
• Nestůjte na židli ani ji nepoužívejte jako schůdky.
• Nesedejte na područkách.
• Maximální nosnost této židle je 150 kg. Nepřekračujte tento limit.
• Udržujte děti a domácí zvířata mimo oblast montáže.

Obsah balení

Před zahájením montáže zkontrolujte, zda jsou v balení obsaženy všechny díly:

• Chair Base (5-star base)
• Chair Leg Tubes (5 pieces)
• Kolečka (5 kusů)
• Plynový výtahový válec
• Decorative Gas Lift Cover
• Seat Cushion with Mechanism attached
• Sestava opěradla
• Loketní opěrky (2 kusy)
• Opěrka hlavy
• Hardware Pack (screws, washers, wrench)

Montážní návod

Follow these steps to assemble your SIHOO M59AS office chair:

1. Sestavte základnu židle:
   • Remove the decorative cover from the chair base.
   • Insert the 5 chair leg tubes into the chair base.
   • Connect them using 10 M6x12 screws. Tighten with the provided wrench.
   • Insert the 5 casters into the chair legs.
   • Insert the gas lift into the central hole of the chair base and then install the decorative cover.
2. Attach the Mechanism to the Seat Cushion:
   • Place the 6mm washers onto the M6x20 screws.
   • Align the mechanism with the seat cushion, ensuring correct orientation (front of mechanism faces front of seat).
   • Connect them using 3 M6x12 screws with 6mm washers. Tighten with the wrench.
3. Připevnění opěradla:
   • Place the 8mm washers onto the M8x40 screws.
   • Align the backrest with the seat cushion.
   • Connect them using 3 M8x40 screws with 8mm washers. Tighten with the wrench.
4. Attach the Armrests:
   • Place the spring washers and 10mm washers onto the M8x45 screws.
   • Connect each armrest using an M8x45 screw with a spring washer and a 10mm washer. Tighten with the wrench. Repeat on the other side.
   • Install the two decorative caps over the armrest screws.
5. Připojení sedadla k základně:
   • Align the gas lift with the hole in the mechanism and insert it into the hole. Press down firmly to secure.
6. Instalace opěrky hlavy:
   • Insert the headrest into the top of the backrest to complete the assembly.

Image: The assembled SIHOO M59AS chair positioned in a modern office environment.

Návod k obsluze

Your SIHOO M59AS chair offers multiple adjustment features for personalized comfort:

• Nastavení výšky: Pull up on the handle located under the seat to adjust the chair's height. Release the handle at your desired height.
• Nastavení loketní opěrky: The 3D coordinated armrests offer versatile positioning.
  • Adjust forward and backward.
  • Rotate inward and outward.
  • Flip up 90° to save space or provide more room for activities like playing guitar.
  

  Obrázek: Podrobný view of the 3D adjustable armrests, showing their rotation and flip-up capabilities.
• Funkce naklápění: Pull out the handle under the seat to recline the backrest. Push the handle in to lock the backrest in an upright position.
• Nastavení napětí v naklápění: Turn the knob located under the seat to adjust the tension of the recline mechanism, allowing for easier or firmer reclining.
• Nastavení opěrky hlavy: The 3D headrest can be adjusted for optimal neck support.
  • Adjust up and down.
  • Rotate around two joints for precise positioning.
  

  Image: Close-up of the 3D adjustable headrest, illustrating its vertical and rotational movement for neck support.

• Bederní podpora: The dual back design with adaptive dynamic lumbar support automatically adjusts with your body's movement, providing continuous support to your lower back in various sitting positions.
  

  Image: Diagram illustrating the dual back design and adaptive dynamic lumbar support system of the chair.
• Saddle Shape Cushion: The wide saddle-shaped cushion is designed to fit the curves of the buttocks and legs, effectively relieving sitting pressure and providing support without causing pressure on the legs. It features high-quality dragon mesh for comfort, durability, ventilation, and breathability.
  

  Obrázek: Detail view of the saddle-shaped seat cushion, highlighting its ergonomic design and mesh material.

• Integrovaný ramínko na šaty: The chair features a thoughtful drying rack/coat hanger integrated into the backrest, allowing you to hang clothes or bags effortlessly.
  

  Image: The integrated coat hanger feature on the back of the chair, designed for convenience.

Údržba

• Čištění: Otřete dočista s reklamouamp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky. V případě síťoviny lze k odstranění prachu použít měkký kartáč.
• Utažení šroubů: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte, aby byla zachována stabilita a bezpečnost.
• Péče o kolečka: Clean casters regularly to prevent hair and debris from accumulating, which can hinder smooth movement.
• Plynový výtah: Nepokoušejte se rozebírat plynový zvedací válec. V případě poruchy kontaktujte zákaznickou podporu.

Odstraňování problémů

Specifikace

• Značka: ANO
• Název modelu: M59AS-M302GM
• Barva: Černý
• Rozměry produktu: 17.12"H x 19.88"Š x 40"V
• Maximální hmotnost Doporučení: 300 liber (150 kg)
• Materiál: Foam (cushion), Mesh (backrest, seat), Plastic (frame), Metal (base)
• Hmotnost položky: 38 libry
• certifikace: BIFMA, SGS

Image: Technical drawing showing the dimensions and key specifications of the SIHOO M59AS chair.

Záruka a podpora

SIHOO offers a 3-year warranty on product parts, providing zero-profit replacement parts during this period. For any questions, issues, or warranty claims, please contact SIHOO customer support directly. You can find contact information on the official SIHOO webwebu nebo prostřednictvím vaší nákupní platformy.

Visit the official SIHOO Store for more information: SIHOO Amazon Store