1. Úvod
The Holyton HT60 is an external Remote ID transmitter designed for unmanned aircraft. It is compliant with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) certification and is a technical compliance (Radio Law) certified product. This device transmits essential flight information such as the drone's latitude, longitude, and speed during operation, contributing to enhanced flight safety and regulatory compliance.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your HT60 Remote ID transmitter. Please read it thoroughly before use.
Obrázek: Overview of the Holyton HT60 Remote ID transmitter, highlighting its compliance with MLIT and unmanned aircraft registration systems.
2. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- 1 x Holyton HT60 External Remote ID Transmitter
- 1 x nabíjecí kabel typu C
- 3 x Velcro Strips
- 1 x Japanese Instruction Manual (This document is an English version)
Image: Contents of the Holyton HT60 package, showing the Remote ID unit, Type-C cable, and Velcro strips.
3. Specifikace
| Model | HT60 |
| Hmotnost | 13.5 g |
| Rozměry (D x Š x V) | 3.4 x 2.8 x 1.35 cm (1.34 x 1.10 x 0.53 palce) |
| Životnost baterie | Approx. 4 hours (240 minutes) |
| Nabíjecí port | Typ-C |
| Komunikační rozsah | Přes 500m |
| Přesnost určování polohy GPS | 5m |
| Konektivita | Bluetooth 5.0 |
| Kompatibilita | Drones weighing 100g or more |
| Certifikace | MLIT Certified, Technical Compliance (Radio Law) Certified |
Image: The Holyton HT60 Remote ID transmitter being held, illustrating its compact size and lightweight design (13.5g, 3.4x2.8x1.35cm).
Image: A drone flying over water with the HT60 attached, highlighting its communication range of over 500m and GPS accuracy of 5m.
4. Nastavení
4.1 Nabíjení zařízení
Before initial use, fully charge the HT60 Remote ID transmitter. Connect the provided Type-C charging cable to the device and a compatible USB power source. The charging indicator will show the charging status. A full charge provides approximately 4 hours of operation time.
Image: The Holyton HT60 connected to a Type-C charging cable, indicating its charging method and 4-hour usage time.
4.2 Attaching to the Drone
The HT60 Remote ID transmitter is designed for external attachment to drones weighing 100g or more. Use the provided Velcro strips for secure mounting.
- Attach one Velcro strip to the back of the Remote ID transmitter.
- Attach another Velcro strip to a suitable, flat surface on your drone.
- Press the Remote ID transmitter firmly onto the Velcro on the drone to secure it.
Image: A visual guide demonstrating the simple attachment method using Velcro for the HT60.
4.3 Úvahy o místě montáže
To ensure optimal GPS signal reception and prevent interference, consider the following when choosing a mounting location:
- Avoid placing the transmitter near propellers to prevent damage.
- Do not cover or obstruct electronic components.
- Mount in a location that does not interfere with drone operation or visibility of buttons and LEDs.
- For best GPS signal acquisition, mount the product on a flat surface of the drone.
Image: A drone with the HT60 mounted, illustrating recommended mounting practices for optimal performance.
4.4 Remote ID Registration (DIPS System)
The HT60 Remote ID transmitter requires registration with the DIPS (Drone Information Platform System) in Japan. Follow these steps to write the registration ID to your device:
- Zapnutí: Press and hold the power switch (power icon) for 3 seconds. The Remote ID will turn on, and the status indicator will slowly flash green.
- Enter Write Mode: Press and hold the gear icon button for 3 seconds. The device will enter write mode, and the status indicator will flash rapidly.
- Povolit Bluetooth: Turn on Bluetooth on your smartphone. You do not need to wait for it to connect to the Remote ID device yet.
- Access DIPS: Log in to the DIPS drone registration system. From the home screen, select the "Write Remote ID" button.
- Vyberte letadlo: From the aircraft list screen, select the "Ownership Details" button for the aircraft you wish to register.
- Poznámka 1: The Remote ID manufacturing number is printed on the Remote ID label. When entering, input only the numerical digits.
- Poznámka 2: When registering with DIPS, select "Xiamen Huoshiquan Import & Export CO., LTD" as the "Remote ID Device Manufacturer Name".
- Initiate Write: Select the "Write Remote ID" button to begin the writing process. If a pairing request appears for the first time, enter "000000".
- Dokončení: Wait for the writing process to complete. A confirmation message will appear.
- Restartovat: Restart the Remote ID. The status indicator will slowly flash, and the GPS indicator will light up. This indicates that the Remote ID has been written and is transmitting aircraft information correctly. If you need to change the ID information via the app, follow the operating guide again.
Video: A tutorial demonstrating the process of writing the registration ID to the Holyton HT60 Remote ID transmitter using the DIPS system.
Image: Visual guide for powering on the HT60 and entering write mode for registration.
Image: Visual guide for enabling Bluetooth on a smartphone and navigating to the DIPS home screen.
Image: Visual guide for selecting the aircraft and entering the Remote ID manufacturing number in DIPS.
Image: Visual guide for initiating the Remote ID writing process and handling pairing requests.
Image: Visual guide showing the progress and completion of the Remote ID writing process.
Image: Visual guide for restarting the HT60 after registration, showing the indicator lights for successful operation.
Video: A tutorial video providing a general guide for Remote ID setup and registration.
Video: A tutorial video demonstrating the method for mounting the Holy Stone Remote ID transmitter.
5. Provoz
5.1 Zapnutí/vypnutí
- Zapnutí: Press and hold the power button for 3 seconds until the status indicator lights up.
- Vypnout: Press and hold the power button for 3 seconds until the status indicator turns off.
5.2 Stavové indikátory
The HT60 features LED indicators to communicate its status:
- Zelené blikání (pomalu): Device is powered on and searching for GPS signal.
- Green Flashing (Rapid): Device is in write mode (for registration).
- Zelená pevná látka: GPS signal acquired and Remote ID is actively transmitting data.
- Červená bliká: Upozornění na vybitou baterii.
- Modré blikání: Připojení Bluetooth je aktivní.
5.3 Flight Operation with Remote ID
Once the HT60 is securely attached to your drone and powered on with a solid green GPS indicator, it will automatically begin transmitting the required Remote ID information during flight. Ensure the device is powered on before drone takeoff.
Video: A tutorial video providing a general guide on operating a drone with Remote ID, demonstrating pre-flight checks and flight procedures.
6. Údržba
6.1 Čištění
Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials, as they may damage the casing nebo vnitřních součástí.
6.2 Skladování
Store the HT60 in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
6.3 Informace o baterii
The product contains a lithium-ion battery. The volumetric energy density of this battery is below 400Wh/L, making it exempt from PSE (Product Safety Electrical Appliance and Material) regulations in Japan. Always use the provided Type-C cable for charging.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapne. | Slabá baterie. | Nabijte zařízení pomocí kabelu typu C. |
| GPS indicator not solid green. | Slabý GPS signál. | Ensure the device is mounted on a flat surface with a clear view of the sky. Avoid obstructions. Wait a few minutes for GPS acquisition. |
| Unable to write registration ID. | Incorrect steps followed; Bluetooth not enabled; incorrect manufacturer name in DIPS. | Review Section 4.4 "Remote ID Registration". Ensure Bluetooth is on and "Xiamen Huoshiquan Import & Export CO., LTD" is selected as the manufacturer. |
| Device not transmitting data. | Not powered on; GPS not acquired; registration ID not written correctly. | Ensure device is powered on and GPS indicator is solid green. Verify registration ID writing as per Section 4.4. |
8. Bezpečnost a dodržování předpisů
The Holyton HT60 Remote ID Transmitter is designed to help drone operators comply with regulations for unmanned aircraft. It is crucial to understand and adhere to all local and national drone regulations, including those related to Remote ID, flight zones, and operator licensing.
- Always operate your drone responsibly and safely.
- Ensure the Remote ID transmitter is functioning correctly before each flight.
- Do not modify the device, as this may void certifications and compromise safety.
9. Záruka a podpora
For warranty information and technical support, please refer to the official Holyton website or contact Holyton customer service directly. Contact details are typically found on the product packaging or the brand's official online presence.
Holyton is committed to developing and improving products that satisfy our customers. We appreciate your continued support. If you have any questions or encounter issues with the product, please do not hesitate to contact our after-sales support.