Tornado 12 Inch High Velocity Cooling Floor Fan

Důležité bezpečnostní informace

Please read and understand all safety instructions before operating this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• This fan is designed for indoor use in commercial and home spaces. Ensure the fan is placed on a stable, level surface.
• Always unplug the fan from the power outlet before cleaning, performing maintenance, or when not in use.
• Do not operate any fan with a damaged cord or plug. If the cord or plug is damaged, contact customer support for assistance.
• Neveďte kabel pod kobercem. Nezakrývejte kabel koberci, běhouny ani podobnými krytinami. Umístěte kabel mimo dosah provozu, kde o něj nikdo nezakopne.
• Keep fingers and other objects away from the fan blades and grille during operation. The fan features a rust-resistant grille for safety.
• This fan is UL-listed and OSHA & UL507 compliant, indicating it meets recognized safety standards.
• Neponořujte ventilátor do vody nebo jiných kapalin.
• Supervise children and pets when the fan is in operation.

Image: The fan's grille and control knob, highlighting its OSHA compliant, rust-resistant grille and UL listing. Noise levels (decibels) for low, medium, and high settings are also shown: 55 dB (Low), 57 dB (Medium), 59 dB (High).

Obsah balení

Po otevření balení se prosím ujistěte, že jsou všechny součásti přítomny a nepoškozené:

• Tornado 12 Inch High Velocity Cooling Floor Fan Unit
• Integrated 6.0 FT Power Cord

Nastavení

The Tornado 12 Inch High Velocity Cooling Floor Fan is designed for quick and easy setup, requiring no tools or complicated assembly.

1. Rozbalení: Carefully remove the fan from its packaging. Retain packaging for future storage or transport if needed.
2. Umístění: Place the fan on a firm, level surface. Ensure there is adequate space around the fan for optimal airflow and to prevent obstruction of the air intake or exhaust. The fan features non-skid feet for enhanced stability.
3. Připojení napájení: Plug the 6.0 FT power cord into a standard 120V AC electrical outlet.

Obrázek: Detailní záběr view of the fan's base, illustrating the non-skid feet that provide stability during operation.

Image: The fan shown with a highlighted portable handle, indicating its ease of movement between locations.

Návod k obsluze

This fan offers powerful airflow and adjustable direction for optimal cooling.

1. Zapnutí/vypnutí: Locate the control knob on the fan. Turn the knob to position '1', '2', or '3' to turn the fan on and select a speed setting. Turn the knob to '0' to turn the fan off.
2. Nastavení rychlosti: The fan features three distinct speed settings to control airflow:
   • Nastavení 1 (Nízké): 1200 CFM (Cubic Feet per Minute) - For gentle air circulation.
   • Nastavení 2 (Střední): 1420 CFM - For moderate cooling.
   • Nastavení 3 (Vysoké): 1650 CFM - For maximum air velocity and cooling performance.
3. Nastavení sklonu: The fan head can be adjusted vertically through a full 120° range. Loosen the adjustment knobs on either side of the fan frame, tilt the fan head to your desired angle, and then tighten the knobs securely to lock it in place.

Image: The fan's control knob and a visual representation of the three speed settings: Low (1200 CFM), Medium (1420 CFM), and High (1650 CFM).

Image: A diagram illustrating the fan's 120° vertical tilting capability and its 6-foot power cord length.

Údržba

Regular maintenance helps ensure the longevity and efficient operation of your Tornado fan.

• Čištění: Před čištěním vždy odpojte ventilátor ze zásuvky. Použijte měkký,amp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or solvents. For the grille, a vacuum cleaner with a brush attachment can be used to remove dust.
• Motor: The fan is equipped with an oil-bearing motor, which typically requires minimal maintenance. Do not attempt to lubricate the motor.
• Skladování: Pokud ventilátor delší dobu nepoužíváte, skladujte jej na chladném a suchém místě, nejlépe v originálním obalu, abyste jej chránili před prachem a poškozením.

Obrázek: Podrobný view of the fan's oil-bearing motor, emphasizing its low-noise operation and open-air design.

Odstraňování problémů

Pokud narazíte na problémy s ventilátorem, podívejte se na následující běžné problémy a jejich řešení:

If the problem persists after attempting these solutions, please contact Tornado customer support.

Specifikace

Detailed technical specifications for the Tornado 12 Inch High Velocity Cooling Floor Fan:

Obrázek: Přední a boční views of the fan with its dimensions clearly marked: 15.35 inches (depth), 7.09 inches (width), and 14.96 inches (height).

Image: A comparison graphic highlighting the benefits of a copper wire motor (higher heat resistance, longer lifespan, more stable and efficient, long-term use) versus a plastic motor (lower heat resistance, shorter lifespan, unstable & inefficient, short-term use).

Záruka a podpora

Your Tornado 12 Inch High Velocity Cooling Floor Fan comes with a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For warranty claims, technical support, or any questions regarding your product, please contact Tornado customer service through the official Tornado brand store:

Visit the Tornado Store

Please have your model number (HI-FAN-12HVFF-1P-HEX2) and proof of purchase ready when contacting support.