1. Úvod
Thank you for choosing the IBELL CT 20-60 Cordless Tile Vibrator. This tool is designed to assist in the precise leveling and secure bonding of tiles, ensuring a professional finish for your tiling projects. Its cordless design offers flexibility and ease of use, powered by a 20V motor with a high vibration frequency and strong suction capacity.
This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your tile vibrator. Please read it thoroughly before first use and keep it for future reference.
2. Bezpečnostní informace
Při používání elektrického nářadí vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.
- Bezpečnost pracovního prostoru: Udržujte své pracovní místo čisté a dobře osvětlené. Nepořádek nebo tmavé prostory vedou k nehodám. Nepoužívejte elektrické nářadí ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
- Elektrická bezpečnost: Zabraňte kontaktu těla s uzemněnými povrchy (např. potrubí, radiátory, sporáky, ledničky). Nevystavujte elektrické nářadí dešti ani vlhku.
- Osobní bezpečnost: Always wear eye protection. Use respiratory protection if dust is created. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
- Použití a péče o nářadí: Netlačte na nářadí silou. Používejte správný nástroj pro danou aplikaci. Před prováděním jakýchkoli úprav, výměnou příslušenství nebo uložením elektrického nářadí odpojte baterii od nářadí.
- Bezpečnost baterie: Recharge only with the charger specified by the manufacturer. Do not disassemble the battery pack. Do not short-circuit the battery pack.
3. Co je v krabici
Your IBELL CT 20-60 Cordless Tile Vibrator package includes the following components:
- IBELL CT 20-60 Tile Vibrator
- BMC Box (Blow Molded Case)
- 2AH baterie
- Nabíječka
4. Vlastnosti produktu
The IBELL CT 20-60 Cordless Tile Vibrator is engineered for efficiency and precision in tile installation:
- Výkonný bezdrátový provoz: Equipped with a 20V motor, providing freedom of movement without power cords.
- Vysoká frekvence vibrací: Delivers up to 15000 RPM for precise tile leveling and strong adhesive bonding.
- Strong Suction Capacity: Features a 150mm suction cup capable of lifting and handling tiles up to 60Kg.
- Wide Tile Compatibility: Suitable for large tiles up to 100 x 100 cm, including marble, ceramic, cement, and plasterboard surfaces.
- Air Gap Removal: Effectively removes air gaps beneath tiles, improving adhesive contact and preventing future issues.
- Ergonomický design: Compact and user-friendly for comfortable handling and reduced fatigue during extended use.
Figure 4.1: Key features of the IBELL CT 20-60 Tile Vibrator, highlighting its 150mm suction cup and 0-15000 RPM vibration frequency.
Figure 4.2: The IBELL CT 20-60 is compatible with various materials including marble, cement walls, plasterboard, and ceramic tiles.
Figure 4.3: Labeled components of the IBELL CT 20-60 Tile Vibrator, including the auxiliary handle, adjustable lever, switch, battery pack, and suction cup.
5. Nastavení
Follow these steps to prepare your IBELL CT 20-60 Tile Vibrator for use:
- Nabijte baterii: Before initial use, ensure the 2AH battery is fully charged using the provided charger. Connect the charger to a power outlet and then to the battery pack. The indicator light on the charger will show the charging status.
- Vložte baterii: Align the battery pack with the battery slot on the tile vibrator. Slide the battery into place until it clicks securely. Ensure it is firmly seated to prevent accidental disconnection during operation.
Figure 5.1: Visual guide for the initial setup and operation of the tile vibrator, starting with battery insertion.
6. Návod k obsluze
Once the battery is installed, you can begin using your tile vibrator:
- Připravte dlaždici: Apply adhesive to the surface where the tile will be placed, following the adhesive manufacturer's instructions.
- Position the Vibrator: To lift and position a tile, place the suction cup of the vibrator firmly onto the tile surface. Pull the adjustable lever (refer to Figure 4.3, item 2) into the up position to engage the suction.
- Place the Tile: Carefully place the tile onto the adhesive bed.
- Aktivace vibrací: Press the switch (refer to Figure 4.3, item 3) located on the left side of the housing. The device will start vibrating.
- Leveling and Air Removal: While the device is vibrating, gently move it across the tile surface. This action helps to settle the tile into the adhesive, remove air gaps, and ensure even bonding. Maintain a firm hold on the suction cup throughout this process.
- Uvolnění sání: Once the tile is properly leveled and bonded, push the adjustable lever down to release the suction cup from the tile.
For optimal results, ensure the tile surface is clean and dry before applying the suction cup.
Figure 6.1: The tile vibrator in action, demonstrating its ability to achieve smooth results and simplify tile installation.
Obrázek 6.2: Přamples of multiple usage scenarios for the IBELL CT 20-60, including wall tiles, marble floors, solid wood, and ceramic tiles.
7. Údržba
Regular maintenance ensures the longevity and optimal performance of your tile vibrator:
- Čištění: Po každém použití otřete nástroj čistým hadříkemamp cloth. Pay special attention to the suction cup to ensure it is free of adhesive residue or debris, which can affect its suction capacity.
- Péče o baterie: Baterie skladujte na chladném a suchém místě mimo dosah přímého slunečního záření. Neskladujte zcela vybité baterie delší dobu. Pokud je nepoužíváte, pravidelně je dobíjejte.
- Skladování: Store the tile vibrator and its accessories in the provided BMC box in a dry, secure location, out of reach of children.
- Inspekce: Periodically inspect the tool for any signs of damage, loose parts, or wear. If any issues are found, contact customer support before further use.
8. Řešení problémů
If you encounter issues with your IBELL CT 20-60 Tile Vibrator, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nástroj se nezapne. | Baterie není nabitá nebo je nesprávně vložena. | Ujistěte se, že je baterie plně nabitá a správně vložená, dokud nezaklapne. |
| Slabé nebo žádné sání. | Suction cup is dirty, damaged, or tile surface is uneven/porous. | Clean the suction cup. Ensure the tile surface is clean, smooth, and non-porous. Check for damage to the suction cup seal. |
| Vibrace jsou slabé nebo nepravidelné. | Low battery charge or internal issue. | Recharge the battery. If the problem persists, contact customer support. |
| Baterie se nenabíjí. | Charger not connected properly or faulty. | Check charger connection to power outlet and battery. Ensure charger is not damaged. |
If you cannot resolve the issue using the troubleshooting guide, please contact IBELL Customer Support.
9. Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | CT20-60 |
| Jmenovitý objemtage | 20V DC |
| Frekvence vibrací | 0-15000 ot./min |
| Průměr přísavky | 150 mm |
| Max. sací výkon | 60 kg |
| Hmotnost nástroje | 1.25 kg |
| Zahrnuté komponenty | Tile Vibrator, BMC Box, 2AH Battery, Charger |
| Země původu | Čína |
10. Záruka a podpora
IBELL provides a 6-month service warranty limited to the motor only. Terms and conditions apply as specified in the warranty card. To ensure complete warranty coverage, it is mandatory to register your product within 10 days of purchase. In the absence of a warranty card, customers must contact IBELL Customer Support within this period.
For any warranty-related queries or assistance, please reach out to IBELL Customer Support:
- Zdarma: 1800-1034-090
- Přímá linka: +91-8589809292
- E-mail: icare@ibelltools.com