Uživatelská příručka k napařovači obličeje ANLAN Nano Ionic

1. Konec produktuview

The ANLAN Nano Ionic Facial Steamer is designed to provide a professional facial spa experience in the comfort of your home. It utilizes advanced nano-spray technology to produce a fine, warm mist that deeply penetrates the skin, opening pores, softening cuticles, and promoting better absorption of skincare products. Its unique design includes an adjustable nozzle and a built-in makeup mirror for precise and convenient use.

Figure 1: ANLAN Nano Ionic Facial Steamer in use, highlighting its compact design and steam output.

Key benefits include deep hydration, improved blood circulation, and preparation of the skin for cleansing and treatment. The device is compact, easy to operate, and features safety mechanisms for worry-free use.

2. Důležité bezpečnostní pokyny

Please read all instructions carefully before using the facial steamer to ensure safe and effective operation.

• The device features an automatic power cut-off when the water tank is empty to prevent overheating.
• Maintain a safe distance of approximately 20cm (8 inches) from the nozzle during operation to avoid skin irritation or burns.
• Use only pure or distilled water in the water tank. Do not add essential oils, lotions, or other substances, as this may damage the device or cause safety hazards.
• Neponořujte zařízení do vody nebo jiných kapalin.
• Uchovávejte mimo dosah dětí.
• Unplug the device when not in use, before cleaning, or when refilling the water tank.

3. Komponenty produktu

The ANLAN Nano Ionic Facial Steamer consists of the following main components:

• Hlavní jednotka: Obsahuje topné těleso a ovládací prvky.
• Nádrž na vodu: Removable tank for filling with water (145ml capacity).
• Nastavitelná tryska: Directs the steam flow.
• Make-up zrcadlo: Integrated into the lid, useful for observing skin during steaming and as a dust cover.
• Vypínač: Pro zapnutí/vypnutí zařízení.

Obrázek 2: Přesview of the facial steamer's main parts.

4. Průvodce nastavením

Před prvním použitím postupujte podle těchto kroků pro počáteční nastavení:

1. Vyjměte nádržku na vodu: Gently press down on the water tank compartment at the back of the unit to release and remove the water tank.
2. Naplňte nádrž na vodu: Unscrew the cap of the water tank and fill it with pure or distilled water. Do not exceed the maximum fill line.
3. Replace Water Tank: Securely screw the cap back on and insert the filled water tank back into its compartment until it clicks into place.
4. Připojte napájení: Zapojte napájecí kabel do vhodné elektrické zásuvky.

Figure 3: Easy-to-follow steps for preparing your steamer.

5. Návod k obsluze

Once set up, the facial steamer is ready for use:

1. Zapnutí: Stiskněte tlačítko napájení, které se nachází na přední straně jednotky. Rozsvítí se kontrolka.
2. Zahřívání: The steamer will begin to warm up, typically producing steam within 30 seconds.
3. Umístění: Position your face approximately 20cm (8 inches) from the nozzle. You can adjust the nozzle direction to target specific areas of your face. The integrated makeup mirror can assist with positioning.
4. Doba vaření v páře: For best results, steam your face for about 10 minutes per session. The 145ml water tank provides approximately 20 minutes of continuous steam.
5. Automatické vypnutí: The device will automatically turn off when the water tank is empty.
6. Vypnout: After use, press the power button again to turn off the device and unplug it from the outlet.

Figure 4: The adjustable nozzle and mirror allow for precise steam application.

Consider incorporating the steamer into your skincare routine as follows:

1. Wash Face: Cleanse your face thoroughly before steaming.
2. Napařování obličeje: Use the ANLAN steamer as directed above.
3. Remove Impurities: After steaming, pores are open, making it easier to remove blackheads or other impurities.
4. Cold Towel: Apply a cold towel to your face to help close pores.
5. Apply Serum/Moisturizer: Apply your preferred serums, moisturizers, or facial masks for enhanced absorption.

Figure 5: Optimize your skincare routine with regular steaming.

Oficiální produktová videa:

6. Péče a údržba

Proper care ensures the longevity and performance of your facial steamer:

• Čištění vodní nádrže: After each use, remove the water tank, empty any remaining water, and allow it to air dry completely. The press-on design makes it simple to access and clean.
• Čištění hlavní jednotky: Otřete vnější část hlavní jednotky měkkým,amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
• Odvápnění: If mineral deposits build up (especially if using tap water), descale the unit periodically according to the instructions provided in the full manual (not included here).
• Skladování: Store the steamer in a cool, dry place when not in use. Ensure the makeup mirror is closed to act as a dust cover for the nozzle.

Figure 6: The removable water tank simplifies cleaning and maintenance.

7. Řešení problémů

If you encounter any issues with your ANLAN Nano Ionic Facial Steamer, consider the following general advice:

• Žádná pára: Ensure the device is properly plugged in and the power button is pressed. Check if the water tank is filled correctly and securely placed. Allow adequate warm-up time (approx. 30 seconds).
• Weak Steam: This could indicate mineral buildup. Refer to the full product manual for descaling instructions. Ensure the water tank is not overfilled or underfilled.
• Zařízení se nezapíná: Verify the power connection. If the device has been recently used, allow it to cool down before attempting to restart.

For persistent issues or specific technical support, please refer to the Warranty and Customer Support section.

8. Specifikace produktu

9. Záruka a zákaznická podpora

ANLAN is committed to providing high-quality products and excellent customer service.

• Záruka: This product comes with a one-year warranty, ensuring it is free from quality problems under normal use.
• Technická podpora: Pro tento produkt je poskytována doživotní technická podpora.
• Vrácení: Free returns and 100% refunds are available for eligible issues.
• Doba odezvy: Customer inquiries typically receive a response within 24 hours on business days.

For any questions, assistance, or to claim warranty support, please contact ANLAN customer service through the platform where you purchased the product.

Figure 7: ANLAN's commitment to customer satisfaction and support.