Midea Duo 14,000 BTU Portable Inverter Air Conditioner (Model RMP14STW) Instruction Manual

1. Úvod a bezpečnostní informace

Thank you for choosing the Midea Duo 14,000 BTU Portable Inverter Air Conditioner. This manual provides essential information for the safe and efficient operation of your unit. Please read it thoroughly before installation and use, and retain it for future reference.

Důležité bezpečnostní pokyny:

• Vždy se ujistěte, že je jednotka umístěna na rovném a stabilním povrchu.
• Neblokujte vstupy nebo výstupy vzduchu.
• Udržujte jednotku mimo zdroje tepla a přímého slunečního světla.
• Zajistěte správné uzemnění, abyste zabránili úrazu elektrickým proudem.
• Neprovozujte jednotku s poškozeným napájecím kabelem nebo zástrčkou.
• Před čištěním nebo prováděním jakékoli údržby odpojte jednotku ze zásuvky.
• Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od jednotky.

2. Co je v krabici

Upon unboxing your Midea Duo Portable Air Conditioner, you should find the following components:

• Přenosná klimatizační jednotka Midea Duo
• Window Panels (5 pieces)
• Adaptéry pro posuvná okna
• Vzduchový dělič
• Ortéza sady oken
• Okenní posuvná pěna
• Foam A (4 pieces)
• Foam B (2 pieces)
• Foam C (2 pieces)
• Uživatelská příručka
• Instalační hardware
• Odtoková hadice a adaptér
• Dálkové ovládání s bateriemi

For models with heating functionality, a hose insulation kit is also included.

3. Nastavení a instalace

The Midea Duo features an innovative dual hose-in-hose design for balanced air circulation and enhanced cooling efficiency. Follow these steps for proper installation.

3.1 Hung Window Installation

1. Measure and Prepare Foam: Measure the width of your window. Cut one piece of Foam A for the window sill and another for the window sash. Install each piece of foam onto the window.
2. Assemble Window Slider: Refer to the user manual for the correct combination of window panels for your window size. Slide the panels together. If your window requires two or more panels, use a bolt to fasten each panel, leaving the end panel loose for adjustment.
3. Install Foam B: Install Foam B to the sides of the window frame or the ends of the window panels, depending on your specific installation.
4. Insert Window Slider: Insert the assembled window slider into the window opening. Ensure the hose cut-out is positioned at the top of the panel and the ends of the window slider are inserted into the window track.
5. Upravte a zajistěte: Adjust the slider so the assembly fits tightly in your window and insert the final bolt.
6. Add Insulation (Optional): For added insulation, install the window slider foam to the outside of the panels.
7. Install Window Kit Brace (If Necessary): Install the window kit brace to prevent the slider assembly from moving when the hose is attached.
8. Close Window and Secure: Close the window and install the included window security bracket found in the installation hardware bag.
9. Install Foam C: Cut Foam C to fit in between the window sashes.
10. Attach Exhaust Adapter: For optimal performance, install the air exhaust adapter onto the exhaust hose by rotating the adapter clockwise until the tabs click into place.
11. Připojte hadici: Prodlužte hadici z klimatizace a připojte ji k posuvníku okna a ujistěte se, že všechny čtyři západky zacvaknou na své místo.

3.2 Sliding Window Installation (Optional)

1. Measure and Prepare Foam: Measure the height of your window. Cut one piece of Foam A for the window frame and another for the window sash. Install each piece of foam onto the window.
2. Assemble Window Slider: Refer to the user manual for the correct combination of window panels for your window size. Slide the panels together. If your window requires two or more panels, use two bolts (one on each side) to fasten each panel, leaving the end panel loose for adjustment.
3. Install Foam B: Install Foam B to the top and bottom of the window frame or the ends of the window panels, depending on your specific installation.
4. Insert Window Slider: Install the window sliders into your window, making sure the hose cut-out is positioned away from the window frame. Adjust the slider so the assembly fits tightly in your window and insert the final bolts.
5. Add Insulation (Optional): For added insulation, install the window slider foam to the outside of the panels.
6. Install Window Kit Brace (If Necessary): Install the window kit brace to prevent the slider assembly from moving when the hose is attached.
7. Close Window and Secure: Close the window and install the included window security bracket found in the installation hardware bag.
8. Install Foam C: Cut Foam C to fit in between the window sashes.
9. Assemble Sliding Window Adapter: Assemble the sliding window adapter by aligning and connecting the two pieces until they click together. Double-check they are correctly aligned and secure with the provided screw. Then attach the air divider until it clicks into place.
10. Attach Adapter to Hose: Attach the adapter to the hose by lining up the circle on the adapter with the circle on the hose and install until all four tabs click in place.
11. Připojte hadici: Connect the hose to the window slider assembly.

Image: Airflow Comparison
This image illustrates the enhanced airflow of the Midea Duo compared to traditional portable air conditioners, highlighting its dual hose design.

4. Návod k obsluze

Your Midea Duo Portable Air Conditioner offers various modes and settings for optimal comfort. The unit can be controlled via the control panel, remote control, or the MSmartHome App.

4.1 Obsluha ovládacího panelu

1. Zapnutí/vypnutí: Plug in your air conditioner and press the MOC tlačítko pro zapnutí nebo vypnutí jednotky.
2. Vyberte režim: Stiskněte tlačítko MODE button to cycle through available operating modes: Auto, Cool, Dry, Fan, and Heat (if applicable).
3. Upravit teplotu: Použijte Nahoru (^) a Dolů (v) šipkami nastavte požadovanou teplotu.
4. Upravte rychlost ventilátoru: Stiskněte tlačítko FAN button to select fan speed: Continuous, Auto, Low, Medium, or High.
5. Funkce houpání: Stiskněte tlačítko SWING button to activate or deactivate the automatic air swing function.
6. Časovač: Použijte ČASOVAČ button to set a timer for the unit to turn on or off.
7. Režim spánku: Stiskněte tlačítko SPÁT button for quieter operation and energy saving during sleep.
8. Reset filtru: Stiskněte a podržte SPÁT button for 3 seconds to reset the filter indicator after cleaning.

4.2 Smart Control (Wi-Fi, App, Voice)

The Midea Duo is Wi-Fi enabled, allowing control via the MSmartHome App (for iOS and Android) or voice commands with Alexa and Google Assistant devices.

• Ovládání aplikace: Download the MSmartHome App, connect your unit, and control all functions remotely.
• Hlasové ovládání: Integrate with Alexa or Google Assistant for convenient voice-activated operation.

Image: Smart Control Interface
This image displays the Midea Smart Home app on a smartphone, illustrating how users can control the air conditioner's settings, modes, and features remotely.

Image: Ultra-Quiet Operation
A visual representation of the Midea Duo's quiet operation, showing a person sleeping undisturbed next to the unit, emphasizing its low noise level of 42dB.

5. Condensate Drain Hose Setup

Proper condensate drainage is crucial for the efficient operation of your unit, especially in Dry or Heat modes.

5.1 Dry Mode Drainage

1. Remove the cover and plug from the top drain outlet.
2. Connect the supplied drain hose.
3. Secure the drain hose to a bucket or use the adapter to connect to a longer hose. A garden hose can be optionally attached to the threaded outlet.
4. Ensure the end of the drain hose is secure to prevent leaks.
5. Save the cap and plug if you wish to change modes later.

5.2 Heat Mode Drainage

1. Remove the middle drain hose cover and plug.
2. Attach the supplied drain hose.
3. Ensure the end of the drain hose is secure to prevent leaks.
4. When enough condensate is generated, the drain pump will activate and pump the condensate out. The drain pump can pump up to 6 feet above the hose connection.

5.3 Cool Mode Drainage

During Cool mode, condensate does not typically need to be drained. However, in high humidity environments, enough condensate may be generated to trigger the P1 code on the display.

• To continue operation, remove the drain cover and plug from the bottom tray and empty the condensate.
• Tip: Raise the unit and place a container under the drain before removing the cap and plug to catch any condensate.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your Midea Duo Portable Air Conditioner.

• Čištění filtru: Regularly clean the dust filter to maintain airflow and efficiency. Refer to the user manual for specific instructions on filter removal and cleaning.
• Čištění jednotky: Otřete vnější část jednotky měkkým, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Skladování: When not in use for extended periods, drain all condensate, clean the unit and filter, and store it in a dry, cool place.

7. Řešení problémů

If you encounter issues with your Midea Duo Portable Air Conditioner, refer to the user manual for a comprehensive troubleshooting guide. Common issues and their solutions include:

• Jednotka se nezapíná: Check power connection, ensure the unit is plugged into a working outlet.
• Jednotka nechladí: Verify mode setting, check temperature setting, ensure air filters are clean, and confirm window kit is properly sealed.
• P1 code displayed: This indicates the condensate tray is full. Drain the condensate as described in Section 5.3.
• Neobvyklý hluk: Check for obstructions in the fan or air vents.

8. Specifikace

Image: Cooling Capacity Guide
This table helps determine the correct cooling capacity needed for your room based on its square footage, with adjustments for environmental factors.

Image: EnergyGuide Label
The EnergyGuide label provides information on the estimated yearly energy cost and efficiency of the portable air conditioner.

Obrázek: Rozměry produktu
This image provides a visual representation of the Midea Duo's dimensions for planning placement and installation.

9. Záruka a podpora

Midea is committed to quality and customer satisfaction.

9.1 Informace o záruce

Tento produkt je dodáván s a 90denní záruka from the original purchase date. This warranty is valid for authorized purchases only and covers parts and labor.

9.2 Zákaznická podpora

For additional support, please contact our customer service team:

Zákaznický servis: 1-866-646-4332