1. Konec produktuview
The Conceptronic Online Tower UPS is designed to provide reliable emergency power for your critical electronic devices. Featuring an output power factor of 0.9, it ensures high efficiency and performance. Its ECO mode helps save energy, and generator compatibility ensures continuous power during extended outages. The UPS includes USB HID communication for seamless device connectivity and an Emergency Power Off (EPO) connector for rapid shutdowns in critical situations.
Klíčové vlastnosti:
- Output power factor: 0.9
- ECO mode for energy saving
- Generator compatible; THDi ≤ 5%
- Poskytuje připojení USB kompatibilní s HID
- Emergency Power Off (EPO) connector
Obrázek 1: Přední strana view of the Conceptronic ZEUS52E3K UPS, displaying the control panel and status indicators.
2. Bezpečnostní pokyny
Please read and follow all safety instructions carefully before installing, operating, or servicing the UPS. Failure to comply with these instructions may result in electric shock, fire, or serious injury.
- Neotevírejte UPS casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
- Neinstalujte UPS na přímém slunečním světle, v blízkosti zdrojů tepla ani v prostředí s nadměrnou prašností, vlhkostí nebo korozivními látkami.
- Ujistěte se, že je UPS připojena k uzemněné zásuvce.
- Do not connect appliances that could overload the UPS, such as laser printers or heaters, to the UPS output.
- In case of emergency, press the EPO button (if applicable) to immediately shut down the UPS and connected equipment.
- Disconnect the UPS from the AC power source before cleaning or performing any maintenance.
3. Obsah balení
Ověřte, zda jsou všechny níže uvedené položky součástí balení. Pokud některé položky chybí nebo jsou poškozené, obraťte se na svého prodejce.
- Conceptronic ZEUS52E3K UPS Unit
- USB komunikační kabel
- Napájecí kabel(y)
- Uživatelská příručka (tento dokument)
4. Nastavení
4.1 Vybalení a umístění
- Opatrně vybalte UPS a zkontrolujte, zda nebyla při přepravě poškozena.
- Place the UPS in a clean, cool, and well-ventilated area, away from direct sunlight and heat sources. Ensure adequate clearance around the unit for proper airflow.
- Avoid placing the UPS near water or excessive humidity.
4.2 Připojení UPS
Obrázek 2: Zadní view of the Conceptronic ZEUS52E3K UPS, highlighting connection ports.
- Připojení vstupního napájení: Připojte napájecí kabel UPS do uzemněné zásuvky střídavého proudu.
- Připojení výstupního zařízení: Connect your critical devices (computers, monitors, network equipment) to the UPS output receptacles. Do not overload the UPS.
- Komunikace přes USB: Connect the provided USB cable from the UPS USB port to your computer's USB port for monitoring and control via compatible software (not included, typically downloadable from manufacturer's webstránky).
- RS232 Komunikace: For advanced monitoring, connect an RS232 cable (not included) from the UPS RS232 port to a compatible device.
- Nouzové vypnutí (EPO): If required, connect an external EPO switch to the EPO port for remote emergency shutdown. Consult a qualified electrician for proper installation of an external EPO switch.
- Inteligentní slot: This slot allows for optional communication cards (e.g., SNMP card) for network monitoring.
5. Návod k obsluze
5.1 Zapnutí UPS
- Ensure the UPS is properly connected to the AC power source and all devices are connected to the UPS output.
- Stiskněte a podržte ON button on the front panel for approximately 2 seconds until you hear a beep. The UPS will perform a self-test and then switch to online mode.
5.2 Vypnutí UPS
- If the UPS is in online mode, press and hold the VYPNUTO button for approximately 2 seconds until you hear a beep. The UPS will shut down.
- To completely power off the UPS, disconnect the input power cord from the AC outlet after shutting down the unit.
5.3 ECO režim
The ECO mode allows the UPS to operate with higher efficiency by bypassing the inverter when utility power is stable. This reduces energy consumption and operating costs. Refer to the detailed manual (if provided separately) or the UPS display for instructions on how to enable/disable ECO mode.
5.4 Emergency Power Off (EPO) Function
The EPO function provides an immediate shutdown of the UPS and all connected equipment in an emergency situation. This is typically activated by an external switch connected to the EPO port. Once activated, the UPS will power down instantly. To restart, resolve the emergency condition, then press the ON tlačítko.
6. Údržba
6.1 Péče o baterii
- The UPS contains sealed lead-acid batteries that are not user-replaceable. Battery replacement should only be performed by qualified service personnel.
- To maximize battery life, keep the UPS in a cool, dry environment.
- Periodically allow the UPS to discharge and recharge its batteries (e.g., once every 3-6 months) to maintain battery health.
6.2 Čištění
- Before cleaning, ensure the UPS is turned off and disconnected from the AC power source.
- Use a soft, dry cloth to wipe the exterior of the UPS. Do not use liquid or aerosol cleaners.
- Udržujte větrací otvory čisté od prachu a nečistot.
7. Řešení problémů
This section provides solutions to common issues you might encounter with your UPS. If the problem persists, please contact technical support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| UPS se nezapne. | No AC input power; Battery deeply discharged. | Check power cord connection and wall outlet; Allow UPS to charge for several hours before attempting to turn on. |
| No power output from UPS. | UPS is off; Overload; Battery low. | Turn on the UPS; Reduce connected load; Allow battery to charge. |
| UPS nepřetržitě pípá. | Battery mode; Overload; Fault condition. | To je normální během výpadku proudu.tages; Reduce connected load; Check display for error codes and consult manual. |
| UPS display shows an error code. | Interní chyba. | Note the error code and contact technical support for assistance. |
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Koncepční |
| Číslo modelu | ZEUS52E3K |
| Rozměry produktu (D x Š x V) | 52 x 46 x 30 cm |
| Hmotnost položky | 1 Kilogram (Note: This weight seems unusually low for a 3000VA UPS and might be a data entry error. Please refer to the product packaging for accurate weight.) |
| Typ elektrické zástrčky | Type E / F - 2 pin (EU hybrid) |
| Výstupní účiník | 0.9 |
| THDI | ≤ 5 % |
| Komunikační porty | USB (HID compatible), RS232, Intelligent Slot |
| Nouzové vypnutí | EPO (Emergency Power Off) connector |
Note: Specifications are subject to change without notice. For the most accurate and up-to-date information, please refer to the product packaging or manufacturer's official webmísto.
9. Záruka a podpora
Conceptronic products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
9.1 Informace o záruce
The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Conceptronic webmísto.
9.2 Technická podpora
If you encounter any issues or have questions regarding your Conceptronic ZEUS52E3K UPS, please contact Conceptronic technical support. You can usually find contact information on the manufacturer's webmístě nebo na obalu produktu.
- Online podpora: Visit the Conceptronic official webweb s nejčastějšími dotazy, ovladači a zdroji podpory.
- E-mailová podpora: Viz website for email contact details.
- Telefonická podpora: Viz website for phone numbers in your region.
When contacting support, please have your product model number (ZEUS52E3K) and purchase date ready.