Beyution NK12

Beyution NK12 Replacement Remote Control User Manual

Model: NK12

1. Konec produktuview

This manual provides instructions for the Beyution NK12 Replacement Remote Control, designed to function as a direct replacement for the original remote of the Nakamichi NK12 400W 38" Surround Sound Soundbar. This remote control requires no programming or pairing for immediate use.

Přední view of the Beyution NK12 Replacement Remote Control

Obrázek 1: Přední view of the Beyution NK12 Replacement Remote Control, showing all buttons.

Klíčové vlastnosti:

  • Přímá náhrada: Functions immediately without programming or pairing.
  • Rozšířený rozsah: Operates effectively up to 10 meters (approximately 33 feet) with stable performance.
  • Odolná konstrukce: Made from ABS plastic and soft rubber, with printing designed for long-term use.
  • Ergonomický design: Lehký a pohodlný na držení.
Comparison image showing the original remote control next to the replacement remote control

Obrázek 2: Comparison of the replacement remote control (left) and the original remote control (right).

2. Nastavení a instalace baterií

The Beyution NK12 Replacement Remote Control operates using AAA batteries. No complex setup or programming is required; simply insert the batteries, and the remote is ready for use.

  1. Otevřená přihrádka na baterie: Locate the battery cover on the back of the remote control. Gently slide or press the latch to open the cover.
  2. Vložte baterie: Insert two (2) AAA 1.5V batteries into the compartment. Ensure the positive (+) and negative (-) terminals of the batteries match the polarity indicators inside the compartment.
  3. Zavřete přihrádku na baterie: Nasaďte kryt baterie a ujistěte se, že bezpečně zacvakne na místo.
Zadní view of the remote control with the battery compartment open, showing where to insert AAA batteries

Obrázek 3: Zadní view dálkového ovladače s odstraněným krytem baterie, znázorňující vložení baterie.

The remote control is now ready for immediate use with your Nakamichi NK12 Soundbar.

3. Návod k obsluze

This remote control provides full functionality for your Nakamichi NK12 400W 38" Surround Sound Soundbar. Point the remote control directly towards the soundbar's infrared receiver for optimal performance.

A person using the remote control to operate a television and soundbar setup

Obrázek 4: Example of remote control usage with a home entertainment system.

Funkce tlačítek:

TlačítkoFunkce
Power (Red Circle)Zapíná nebo vypíná soundbar.
LED DIMAdjusts the brightness of the soundbar's LED display.
TV-HDMISelects HDMI input source.
AUXSelects Auxiliary input source.
LINE INSelects Line In input source.
OPTSelects Optical input source.
BT (Bluetooth)Selects Bluetooth input source.
PÁRZahájí režim párování Bluetooth.
SPÁTActivates or deactivates sleep timer function.
ZTLUMITVypne nebo vypne zvuk.
VOL- / VOL+Decreases / Increases volume level.
Previous / Play/Pause / NextControls media playback (e.g., skip tracks, play/pause).
FILMAktivuje režim filmového zvuku.
ZPRÁVYActivates News sound mode.
HUDBAAktivuje zvukový režim Hudba.
SPORTOVNÍActivates Sports sound mode.

4. Údržba

Správná údržba zajistí dlouhou životnost a optimální výkon vašeho dálkového ovladače.

  • Čištění: Use a soft, dry cloth to clean the surface of the remote control. Avoid using liquid cleaners or abrasive materials, as these can damage the finish or internal components.
  • Výměna baterie: Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries simultaneously with new ones of the same type (AAA 1.5V). Do not mix old and new batteries or different battery types.
  • Skladování: Pokud dálkový ovladač nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení a poškození. Dálkový ovladač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

5. Řešení problémů

If you encounter issues with your Beyution NK12 Replacement Remote Control, refer to the following troubleshooting steps:

  1. Dálkové ovládání nereaguje:
    • Zkontrolujte baterie. Ujistěte se, že jsou vloženy správně se správnou polaritou (+/-).
    • Vyměňte staré baterie za nové baterie AAA 1.5V.
    • Ensure there are no obstructions between the remote control and the soundbar's infrared receiver.
    • Verify that the remote is pointed directly at the soundbar.
  2. Omezený rozsah:
    • Ensure batteries are fresh. Weak batteries can reduce the operating range.
    • Minimize interference from other electronic devices or bright light sources.
  3. Specific Button Not Working:
    • Gently press the button multiple times to ensure it is not stuck.
    • If the issue persists after checking batteries, the remote may be faulty.

Pokud tyto kroky problém nevyřeší, obraťte se na zákaznickou podporu s žádostí o další pomoc.

6. Specifikace produktu

FunkceDetail
Číslo modeluNK12
KompatibilitaNakamichi NK12 400W 38" Surround Sound Soundbar
Technologie připojeníInfračervený (IR)
Maximální ovládací vzdálenost10 metrů (přibližně 33 stop)
MateriálABS Plastic, Soft Rubber
Zdroj napájení2 x AAA 1.5V baterie (nejsou součástí balení)
Rozměry produktu7 x 1.5 x 0.5 palce (17.8 x 3.8 x 1.3 cm)
Hmotnost položky1.9 unce (54 gramů)
BarvaČerný

7. Záruka a podpora

Beyution provides customer support for its products. If you receive a damaged or non-functional remote control, or if your specific device model is not listed as compatible, please contact us directly for assistance.

For any inquiries or support needs, please refer to the contact information provided with your purchase or on the Beyution official website. We are committed to providing a satisfactory solution.

© 2024 Beyution. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.