LEZYNE Strip Drive 150 Lumens Rear Bicycle Light User Manual

1. Úvod

The LEZYNE Strip Drive 150 Lumens Rear Bicycle Light is designed to enhance cycling safety with its powerful illumination and versatile features. This manual provides essential information for the proper setup, operation, and maintenance of your new bicycle light.

Figure 1: LEZYNE Strip Drive 150 Lumens Rear Bicycle Light

2. Vlastnosti produktu

• Vynikající viditelnost: Designed for optimal light dispersion with wide-angle optics offering 270-degrees of visibility.
• Odolná konstrukce: Built to withstand various weather conditions, tested to IPX7 Waterproofing standards. Features a lightweight yet durable co-molded design.
• Všestranná montáž: Equipped with a silicone rubber mounting strap that attaches to both aero and round seatposts.
• Více režimů světla: Delivers up to 150 lumens of brightness through its 5 LEDs. Offers 11 light modes, including Blast, Enduro, Economy, Flash 1-6, Day Flash 1, and Day Flash 2.
• Nabíjecí: Conveniently rechargeable via a Micro USB port (cable included).
• Kompaktní design: Weighs just 54g with dimensions of 79.3mm x 36mm x 35.8mm.

3. Nastavení

3.1. Montáž

The Strip Drive light comes with a versatile silicone rubber strap for secure attachment to your bicycle's seatpost. It is compatible with both aero and round seatposts.

1. Position the light on your seatpost with the LEDs facing backward.
2. Wrap the silicone strap around the seatpost and hook it onto the designated tab on the light body. Ensure a snug fit to prevent movement during rides.

Figure 2: Light mounted on a seatpost

Obrázek 3: Strana view of light on a bicycle

3.2. Nabíjení

The Strip Drive light is equipped with a Micro USB port for convenient recharging. A Micro USB cable is included with your purchase.

1. Locate the Micro USB port on the light, typically covered by a rubber flap to protect against water and dust.
2. Jemně otevřete gumovou klapku.
3. Connect the Micro USB cable to the light's port and the other end to a powered USB source (e.g., computer, wall adapter).
4. The battery indicator LED will show charging status (refer to Section 4.3 for details).
5. Once fully charged, disconnect the cable and securely close the rubber flap to maintain IPX7 waterproofing.

Obrázek 4: Přední strana view světla

Obrázek 5: Zadní view světla

4. Návod k obsluze

4.1. Zapnutí/vypnutí

• Zhasnout světlo ON, press and hold the power button located on the top of the light for approximately 2 seconds.
• Zhasnout světlo VYPNUTO, stiskněte a podržte tlačítko napájení přibližně 2 sekundy.

4.2. Výběr režimu

Once the light is on, short press the power button to cycle through the 11 available light modes. The light will remember the last selected mode when turned off and on again.

Figure 6: LEZYNE Strip Drive light in operation

Figure 7: Enhanced visibility with the light at night

4.3. Indikátor baterie

The integrated LED indicator provides a general idea of the battery charge level:

• Zelené světlo: 100-75% účtováno
• Green and Red Light: 75-25% účtováno
• Červené světlo: Nabito 25–0 % (brzy dobití)

5. Údržba

• Čištění: Otřete světlo reklamouamp hadříkem k odstranění nečistot a nečistot. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.
• Nabíjení: For optimal battery life, charge the light regularly, especially after long rides or when the battery indicator shows low charge. Do not store the light with a completely depleted battery for extended periods.
• Skladování: Store the light in a cool, dry place away from direct sunlight when not in use.
• Hydroizolace: Ensure the Micro USB port's rubber flap is securely closed at all times when not charging to maintain its IPX7 water resistance.

6. Řešení problémů

• Světlo se nerozsvítí: Ujistěte se, že je baterie nabitá. Připojte k USB zdroji napájení a zkontrolujte indikátor nabíjení.
• Světlo se nenabíjí: Verify the USB cable is properly connected to both the light and the power source. Try a different USB cable or power source. Ensure the charging port is clean and free of debris.
• Light not staying securely mounted: Re-adjust the silicone strap for a tighter fit around the seatpost. Ensure the strap is correctly hooked.
• Zkrácená doba běhu: Battery capacity may decrease over time with repeated charging cycles. Ensure the light is fully charged before each use.

7. Specifikace

8. Oficiální video produktu

9. Záruka a podpora

For warranty information and customer support, please refer to the official LEZYNE website or contact your retailer. Product protection plans may be available for purchase separately.

Navštivte Obchod LEZYNE na Amazonu pro více produktů a informací.