1. Úvod
Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.
The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.
2. Nastavení
Správné nastavení je klíčové pro dosažení nejlepší kvality zvuku a pro prevenci poškození gramofonu a desek.
2.1 Vybalení a umístění
Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.
Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.
2.2 Instalace talíře a pásu
- Place the main platter onto the spindle.
- Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.
Obrázek 2.2: Detail view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.
2.3 Nastavení raménka a přenosky
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:
- Nastavení protizávaží: Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
- Tracking Force Setting: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
- Úprava proti bruslení: Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.
Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.
Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.
2.4 Připojení
Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your ampzosilňovač pro minimalizaci hučení.
Connect the power adapter to the turntable's power input and then to a suitable wall outlet.
Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.
3. Návod k obsluze
This section details the steps for playing records and using the turntable's features.
3.1 Zapnutí a výběr rychlosti
Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).
Video 3.1: Pro-Ject Debut Evo 2 Introduction. This video provides a visual overview of the turntable's features and operation.
3.2 Přehrávání desky
- Umístěte desku na talíř.
- Select the correct playback speed (33 1/3 or 45 RPM).
- Zvedněte raménko přenosky pomocí páčky pro nastavení tónu.
- Carefully position the stylus over the lead-in groove of the record.
- Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.
Obrázek 3.1: Shora dolů view of the turntable during record playback. The tonearm is positioned over the record.
3.3 Zastavení přehrávání
- Zvedněte raménko přenosky pomocí páčky pro nastavení tónu.
- Return the tonearm to its rest and secure it with the tonearm clip.
- Turn off the turntable by pressing the power button.
4. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho gramofonu.
4.1 Čištění gramofonu
- Protiprachový kryt: Očistěte protiprachový kryt měkkým hadříkemamp tkanina. Vyhněte se abrazivním čisticím prostředkům.
- Podstavec a talíř: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp Lze použít hadřík a poté suchý.
- Stylus: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.
4.2 Belt Replacement
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
5. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat při používání gramofonu.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádná síla | Power cable not connected; faulty power outlet | Check power connections; try a different outlet |
| Žádný zvuk z jednoho nebo obou kanálů | Incorrect cable connection; damaged cartridge/stylus; amplifier input issue | Check RCA connections; ensure ground wire is connected; inspect stylus for damage; test amplifier with another source |
| Bzučivý hluk | Ground wire not connected; proximity to other electronics; faulty cables | Ensure ground wire is securely connected; move turntable away from other devices; try different cables |
| Nekonzistentní rychlost | Worn or stretched drive belt; motor issue | Replace drive belt; contact support if issue persists |
| Přeskakující nebo zkreslený zvuk | Incorrect tracking force/anti-skating; dirty stylus; damaged record | Re-adjust tracking force and anti-skating; clean stylus; inspect record for damage |
6. Specifikace
Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.
- Model: Debut EVO 2
- Číslo modelu položky: 9120129864978
- Značka: Projekt
- Rozměry produktu: 16.4 x 12.6 x 4.5 palce (41.66 x 32.00 x 11.43 cm)
- Hmotnost položky: 13.2 libry (6 kg)
- Platter Material: Damped Aluminum (1.7kg, anti-magnetic)
- Rameno: Uhlíkové vlákno
- Kazeta: Pick it MM EVO (pre-mounted)
- Rychlost: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
- Technologie připojení: Auxiliary (RCA outputs)
- Zahrnuté komponenty: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
- Speciální vlastnosti: Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.
7. Informace o záruce
Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject webmísto.
K dispozici jsou také ochranné plány k zakoupení:
- Dvouletý ochranný plán
- Dvouletý ochranný plán
- Kompletní ochrana (měsíční tarif)
8. Podpora a kontakt
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webmísto pro zdroje podpory.
Můžete také navštívit Pro-Ject Store on Amazon pro další informace o produktech a příslušenství.