Dreamflame B0DBGL4T1K

Uživatelská příručka k elektrickému krbu Dreamflame 88 palců

Model: B0DBGL4T1K

1. Úvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Dreamflame 88-inch Electric Fireplace. Please read all instructions carefully before use and retain this manual for future reference.

Dreamflame 88-inch Electric Fireplace with remote control

Image 1.1: The Dreamflame 88-inch Electric Fireplace and its remote control.

2. Bezpečnostní informace

Abyste předešli požáru, úrazu elektrickým proudem nebo zranění, vždy dodržujte tato základní bezpečnostní opatření:

  • Před použitím tohoto krbu si přečtěte všechny pokyny.
  • Do not cover the front air outlet on top of the fireplace heater. Obstruction can lead to overheating.
  • Ensure the fireplace is plugged into a properly grounded outlet. Consider using a Ground Fault Circuit Interrupter (GFCI) for added protection, especially if the power cord feels warm during operation.
  • This electric fireplace is equipped with a built-in overheating protection device that automatically shuts off the unit if it reaches an unsafe temperature. If this occurs, unplug the unit, wait 10-15 minutes, and then plug it back in. If the issue persists, contact customer support.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the fireplace.
  • Nevkládejte ani nedovolte, aby se cizí předměty dostaly do ventilačních nebo výfukových otvorů, protože by to mohlo způsobit úraz elektrickým proudem, požár nebo poškození ohřívače.

3. Obsah balení

Pečlivě vybalte všechny komponenty a ujistěte se, že jste obdrželi následující položky:

  • Dreamflame 88-inch Electric Fireplace Unit
  • Dálkové ovládání (vyžaduje 2 baterie AAA, nejsou součástí balení)
  • Montážní konzola
  • Hand-painted Realistic Logs
  • Crystal Clear Cube Ember Bed
  • Uživatelská příručka
  • Screws and Wall Anchors for installation
Components of the Dreamflame Electric Fireplace including handle, touch control panel, remote control, mounting bracket, warm air outlet, and air inlet.

Image 3.1: Key components of the electric fireplace.

4. Specifikace

FunkceSpecifikace
ZnačkaDreamflame
Název modelu844754fd-7cf8-4360-a0ba-8de95ca5417f
Rozměry produktu (celkově)88 cm Š x 5.5 cm H x 17.7 cm V
Insert Dimensions86.8 cm Š x 5.5 cm H x 16.9 cm V
MateriálKov
BarvaČerný
Zdroj napájeníAC
Možnosti vytápění750W / 1500W
Pokrytí topeníAž 400 čtverečních stop
Rozsah termostatu71 ° F ~ 99 ° F
Barvy plamene3 (L1-L3)
Nejlepší světlé barvy3 (F1-F3)
Časovač1 hodin ~ 9 hodin
Typ instalaceRecessed or Wall Mount
Hmotnost položky94.8 libry
Detailed dimensions of the Dreamflame 88-inch Electric Fireplace, showing top, side, and front views měřeními.

Obrázek 4.1: Rozměry produktu pro plánování instalace.

5. Nastavení a instalace

The Dreamflame electric fireplace can be installed as a recessed unit or wall-mounted. Ensure you reserve adequate space for the plug-in cable and air vent during installation.

5.1 Preparing the Ember Bed

  1. Locate the two silver screws on each side of the fireplace unit.
  2. Carefully remove these screws to detach the glass door.
  3. Install the plastic bottom tray.
  4. Arrange the provided realistic logs and/or crystal clear cube ember bed materials as desired.
  5. Reattach the glass door and secure it with the two silver screws on each side.

5.2 Zapuštěná instalace

For recessed installation, a cutout in the wall or cabinet is required. Refer to the dimensions in Section 4. Ensure the cutout provides sufficient clearance for the fireplace unit and allows for proper ventilation.

Diagram illustrating the steps for recessed installation of the electric fireplace into a wall.

Image 5.1: Recessed installation diagram.

  1. Create a wall opening according to the insert dimensions (86.8"W x 5.5"D x 16.9"H).
  2. Secure the fireplace unit into the opening using appropriate screws and anchors.
  3. Ensure the unit is level and flush with the wall surface.

5.3 Instalace na stěnu

The fireplace comes with a mounting bracket for wall-mounted installation.

Comparison image showing the electric fireplace installed as wall-mounted and recessed.

Image 5.2: Visual representation of wall-mounted and recessed installation options.

Diagram illustrating the steps for wall-mounted installation of the electric fireplace.

Image 5.3: Wall-mounted installation diagram.

  1. Select a suitable wall location, ensuring it can support the fireplace's weight (94.8 lbs).
  2. Attach the mounting bracket to the wall using the provided screws and anchors, ensuring it is level.
  3. Carefully lift the fireplace unit and hook it onto the wall mounting bracket.
  4. Secure the fireplace to the bracket with additional screws if necessary, as indicated in the diagram.

6. Návod k obsluze

Your Dreamflame electric fireplace can be operated using the touch control panel on the unit or the included remote control.

Image showing both the touch control panel on the fireplace and the remote control for dual operation methods.

Image 6.1: Dual control methods: touch panel and remote control.

6.1 Funkce dálkového ovládání

Insert 2 AAA batteries into the remote control. The remote allows you to control all functions from a distance.

Diagram showing the functions of the fireplace control panel and remote control, including power, temperature, heat power, top light color, timer, and flame color.

Image 6.2: Control panel and remote functions.

  • Napájení (ZAP/VYP): Stisknutím zapnete nebo vypnete krb.
  • Teplota (71–99 °C): Nastavte požadovanou pokojovou teplotu.
  • Heat Power (750W/1500W): Select between low (750W) or high (1500W) heat settings. Heat can be switched off independently while flames remain active.
  • Top Light Color (F1-F3): Cycle through 3 different top light colors.
  • Timer (1H-9H): Set an automatic shut-off timer from 1 to 9 hours.
  • Flame Color (L1-L3): Cycle through 3 different flame colors.

6.2 Flame and Ember Bed Effects

The fireplace offers realistic flame effects and customizable ember bed options.

Images showing various flame and ember bed combinations, including logs and crystals, crystals only, and logs only, with different flame colors.

Image 6.3: Various flame and ember bed configurations.

Image demonstrating 3 flame colors combined with 3 top light colors for diverse visual effects.

Image 6.4: Combination of flame and top light colors.

  • Choose between realistic logs, crystal clear cubes, or a mixture for the ember bed.
  • Adjust flame colors (L1-L3) and top light colors (F1-F3) independently to create your desired ambiance.

6.3 Provoz topení

The fireplace provides supplemental heating for areas up to 400 sq ft.

Image illustrating the heating options of the fireplace, showing temperature settings from 71°F to 99°F and heat output of 750W/1500W.

Image 6.5: Heating options and coverage.

  • Select 750W for lower heat output or 1500W for faster heating.
  • Use the thermostat to set your preferred temperature between 71°F and 99°F.
  • The heating function can be operated independently of the flame effects.

7. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho elektrického krbu.

  • Čištění: Před čištěním se ujistěte, že je jednotka vypnutá a odpojená od sítě. Použijte měkký,amp hadříkem k otření vnějších povrchů. Nepoužívejte abrazivní čisticí prostředky ani spreje.
  • Skleněný panel: Clean the glass panel with a soft cloth and a glass cleaner. Avoid harsh chemicals that may damage the finish.
  • Větrací otvory: Periodically check and clean the air inlet and warm air outlet vents to ensure they are free from dust and debris, which can impede airflow and heating efficiency.
  • Skladování: Pokud budete krb skladovat delší dobu, odpojte jej ze zásuvky a uložte jej na suchém a bezprašném místě.

8. Řešení problémů

Pokud narazíte na problémy s krbem, podívejte se na následující běžné problémy a jejich řešení:

ProblémMožná příčinaŘešení
Krb se nezapíná.Žádné napájení, napájecí kabel odpojený ze zásuvky, jistič vypnutý.Zkontrolujte zásuvku, ujistěte se, že je kabel bezpečně zapojený, a resetujte jistič.
Žádný tepelný výkon.Heat function not activated, thermostat set too low, overheating protection activated.Activate heat function, increase thermostat setting, unplug unit for 10-15 minutes to reset overheating protection.
Plameny nejsou vidět.Flame effect not activated.Press the flame button on the control panel or remote.
Dálkové ovládání nefunguje.Vybité baterie, dálkový ovladač mimo dosah, překážka.Replace AAA batteries, ensure remote is pointed at the fireplace, remove any obstructions.
Jednotka se neočekávaně vypne.Aktivována ochrana proti přehřátí.Unplug the unit, wait 10-15 minutes, check for blocked air vents, then plug back in.

If the problem persists after attempting these solutions, please contact Dreamflame customer support.

9. Záruka a podpora

Dreamflame provides a 1letá záruka kvality for this electric fireplace. We are committed to creating a great user experience and welcome customer feedback.

For any questions, concerns, or support needs, please contact Dreamflame customer service. Our team is available to provide lifetime support for your product.

You can find contact information on the Dreamflame official webwebu nebo prostřednictvím vaší nákupní platformy.

© 2024 Dreamflame. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.