BAKON BK852D+

BAKON BK852D+ 2-in-1 Heat Gun and Soldering Iron Rework Station Instruction Manual

Model: BK852D+

1. Úvod

Thank you for choosing the BAKON BK852D+ 2-in-1 Heat Gun and Soldering Iron Rework Station. This comprehensive kit is designed for professional soldering, industrial and manufacturing, precision electronics, school labs, home and hobby use, and electronic DIY and repair. It combines a powerful soldering iron and a hot air gun in one unit, offering precise temperature control and a range of accessories for various tasks.

BAKON BK852D+ 2-in-1 Heat Gun and Soldering Iron Rework Station with accessories

Figure 1: BAKON BK852D+ 2-in-1 Heat Gun and Soldering Iron Rework Station with included accessories.

2. Bezpečnostní informace

Před použitím tohoto výrobku si pečlivě přečtěte všechna bezpečnostní varování a pokyny. Nedodržení varování a pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

  • Always wear appropriate personal protective equipment, including safety glasses, when operating the station.
  • Ensure the workstation is placed on a stable, heat-resistant surface.
  • Do not touch the hot tip of the soldering iron or the hot air gun nozzle. They can reach very high temperatures.
  • Allow tools to cool completely before storing.
  • Use in a well-ventilated area to avoid inhaling fumes from solder and flux.
  • Uchovávejte mimo dosah dětí.
  • This product uses a US plug with 110V. Do not plug directly into a 220V~240V power outlet.

3. Nastavení

Follow these steps to set up your BAKON BK852D+ Rework Station:

  1. Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou přítomny všechny položky uvedené v dodacím listu.
  2. Umístění: Place the main unit on a stable, flat, and heat-resistant workbench. Ensure adequate ventilation around the unit.
  3. Připojení páječky: Connect the soldering iron handle to the designated port on the main unit. Secure the connection by screwing the collar. Place the soldering iron in its stand.
  4. Připojení horkovzdušné pistole: Connect the hot air gun handle to its designated port on the main unit. Secure the connection. Place the hot air gun in its holder.
  5. Install Nozzles/Tips: Select the appropriate hot air nozzle for your task and attach it to the hot air gun. For the soldering iron, choose a soldering tip and insert it into the iron.
  6. Připojení napájení: Connect the power cord to the main unit and then plug it into a 110V AC power outlet.
Diagram showing connections for the hot air gun and soldering iron to the main unit.

Figure 2: Connection points for the hot air gun and soldering iron to the main station.

Detailed diagram of the BAKON BK852D+ station components and their connections.

Obrázek 3: Rozložené view of the station showing various components and their assembly.

Video 1: Overview of the BK852D+ Rework Soldering Station, demonstrating its components and basic setup. This video shows the physical unit and its accessories.

4. Návod k obsluze

4.1. Zapnutí/vypnutí

Locate the main power switch on the unit. Flip it to the 'ON' position to power on the station. The LED digital display will illuminate.

4.2. Obsluha páječky

  1. Aktivovat: Turn on the individual ON/OFF switch for the soldering iron.
  2. Nastavit teplotu: Use the knob-type temperature adjustment for the soldering iron to set the desired temperature between 100-480°C (212-896°F). The LED display will show the set temperature. The unit features PID temperature control for stability.
  3. Pájení: Once the iron reaches the set temperature, it is ready for use. Apply solder to the joint while touching the tip of the iron to the components.
Close-up of the soldering station controls, showing LED display, temperature knob, and on/off switch.

Figure 4: Soldering station controls with LED digital display and temperature adjustment knob.

A person using the soldering iron to work on a circuit board.

Obrázek 5: Přample of using the soldering iron for electronic work.

4.3. Provoz horkovzdušné pistole

  1. Aktivovat: Turn on the individual ON/OFF switch for the hot air gun.
  2. Set Temperature & Airflow: Use the AIR/TEMP knob to adjust the temperature between 100-500°C (212-932°F) and the airflow up to 28L/min. The LED display will show the set temperature. PID stabilization ensures consistent temperature.
  3. Hot Air Standby Mode: When the hot air gun is placed in its holder, it automatically cools down to 212°F and stops heating, enhancing safety and extending heating element life.
  4. Přepracování: Direct the hot air stream onto the components for desoldering or heat shrinking.
Close-up of the hot air rework station controls, showing LED display, air/temp knob, and independent switch.

Figure 6: Hot air rework station controls with LED digital display and air/temperature adjustment knob.

Diagram illustrating the automatic cooling function of the hot air gun when placed in its holder.

Figure 7: Automatic cooling feature of the hot air gun for safety and extended lifespan.

A person using the hot air gun for rework on a circuit board.

Obrázek 8: Přample of using the hot air gun for electronic rework.

Video 2: A demonstration of the 2-in-1 SMD Hot Air Rework and Soldering Iron Station, showcasinjeho vlastnosti a provoz.

5. Údržba

5.1. Péče o pájecí hrot

  • Regularly clean the soldering tip using the brass cleaner or a damp sponge provided.
  • Always tin the tip with a small amount of solder before and after use to prevent oxidation and prolong its life.
  • Replace tips when they become excessively worn or corroded.

5.2. Hot Air Nozzle Care

  • Ensure hot air nozzles are free from debris or blockages. Clean gently if necessary after the unit has cooled.

5.3. Generální úklid

  • Hlavní jednotku otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Ensure the unit is unplugged and completely cool before cleaning.

Video 3: A demonstration of TOWOT Solder Wick for desoldering, a useful technique for maintenance and rework.

6. Řešení problémů

ProblémMožná příčinaŘešení
Jednotka se nezapneŽádné napájení; Vypnutý vypínač; Spálená pojistkaCheck power connection; Turn on power switch; Replace fuse (refer to specifications for fuse type).
Páječka se nezahříváIron switch off; Temperature set too low; Faulty heating element/tipTurn on iron switch; Increase temperature; Inspect/replace heating element or tip.
Hot air gun not heating/no airflowHot air switch off; Temperature/airflow set too low; Nozzle blocked; Faulty heating element/fanTurn on hot air switch; Increase temperature/airflow; Clear nozzle; Inspect/replace heating element or fan.
Nekonzistentní teplotaSensor issue; Incorrect PID calibrationContact customer support for sensor check; Refer to advanced settings for PID calibration (if applicable).

7. Specifikace

  • Model: BK852D+
  • Výstupní výkon: 700W
  • Vstupní objemtage: AC 110V
  • Teplotní rozsah páječky: 100-480 °C (212-896 °F)
  • Teplotní rozsah horkovzdušné pistole: 100-500 °C (212-932 °F)
  • Hot Air Gun Airflow: Až 28 l/min
  • Typ displeje: LED digitální displej
  • Temperature Stability (Soldering Iron): ±2 °C
  • Temperature Stability (Hot Air Gun): ±3 °C
  • Rozměry: 31.7 x 26.9 x 17.91 cm
  • Hmotnost položky: 4.25 kg
  • Barva: Modrý
  • Materiál: Foam, Lead, Iron, Sponge
  • Zahrnuté komponenty: Soldering Station, Lead-free solder (30g), 5 soldering tips, 2 hot air nozzles, ESD-safe tweezers, desoldering pump, soldering iron stand, brass cleaner, cleaning sponge, solder suction tape.

8. Záruka a podpora

Tento produkt je dodáván s a 12-month US warranty. If you encounter any problems during use, please do not hesitate to contact our professional Amazon team. We are committed to providing a solution within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official BAKON store on Amazon.

Důležitá poznámka: Do not plug directly into 220V~240V power outlet.