Alinco DJ-X82

Alinco DJ-X82 Analog Communication Receiver

Uživatelská příručka

Zavedení

Thank you for choosing the Alinco DJ-X82 Analog Communication Receiver. This manual provides essential information for the safe and efficient operation of your device. The DJ-X82 is a versatile receiver designed for wide-band reception, covering frequencies from 108 MHz to 470 MHz in AM/FM modes, with an additional circuit for FM broadcast reception from 76-108 MHz. Please note that some frequencies may be blocked.

The DJ-X82 features a user-friendly keypad, making it accessible for both beginners and experienced users. It includes advanced functions such as Quick Memory, Quick Search Pass banks, and efficient memory scanning with SKIP and reverse SKIP options. A free editing software is available for PC connection via the included USB cable, allowing for easy memory registration and set mode configuration.

Nastavení

  1. Instalace baterie: The DJ-X82 uses 2 AA-size batteries (included). Open the battery compartment cover on the back of the unit and insert the batteries, ensuring correct polarity.
  2. Připojení antény: Screw the supplied antenna clockwise onto the antenna connector located at the top of the receiver until it is finger-tight. Do not overtighten.
  3. Počáteční zapnutí: Press and hold the power button to turn on the receiver. The display will illuminate.
  4. Připojení k PC (volitelné): For advanced memory management and settings, connect the receiver to your PC using the provided USB cable. Download the free editing software from the Alinco Electronics Division webmísto.
Alinco DJ-X82 Analog Communication Receiver with antenna and display

Image: The Alinco DJ-X82 Analog Communication Receiver, showing its compact design, keypad, display, and attached antenna. This image illustrates the main unit and its primary components.

Návod k obsluze

  • Zapnutí/vypnutí: Stiskněte a podržte [NAPÁJENÍ] tlačítko pro zapnutí nebo vypnutí jednotky.
  • Ladění frekvence: Použijte [DIAL] knob to adjust the frequency. Press the [REŽIM] button to cycle through AM and FM modes.
  • Quick Memory: The receiver features 200 channels of Quick Memory. To store a frequency, tune to the desired frequency, then press the [MEMO] button followed by a number key.
  • Quick Search Pass: Utilize the 200 channels of Quick Search Pass banks. During a search, pressing the dial allows you to skip noise or temporarily store found signals, which can then be easily moved to conventional banks.
  • Program Scan: Register scan conditions in pairs. This allows searching the same frequency band with different steps and modes. The unit supports 50 pairs of program scans.
  • Skenování paměti: The memory scan function is enhanced with traditional SKIP and a new "Favorite Selection (Reverse SKIP)" feature. Use the SKIP reset function for more efficient scanning.
  • Ovládání hlasitosti: Upravte hlasitost pomocí vyhrazených [VOL] knoflík.
  • Ovládání Squelch: Adjust the squelch level using the [SQL] knob to suppress background noise when no signal is present.

Údržba

  • Čištění: Use a soft, dry cloth to clean the exterior of the receiver. Do not use abrasive cleaners or solvents.
  • Péče o baterie: If the unit will not be used for an extended period, remove the batteries to prevent leakage. Rechargeable batteries should be charged regularly according to their specifications.
  • Skladování: Přijímač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Odstraňování problémů

  • Bez napájení: Ensure batteries are correctly installed and charged. Check for any corrosion in the battery compartment.
  • Žádný příjem/špatný zvuk: Verify the antenna is securely connected. Check the frequency and mode settings. Adjust the squelch level. Move to an area with better signal reception.
  • Klávesnice nereaguje: Turn the unit off and on again to reset. If the issue persists, contact customer support.
  • Problémy se zobrazením: Check battery level. If the display is dim or flickering, replace or recharge batteries.

Specifikace

FunkcePopis
ZnačkaAlinco
Číslo modeluDJ-X82
BarvaČerný
Speciální funkceDobíjecí
Technologie připojeníAUX
Technologie tuneruUHF
Hmotnost produktu200 gramů
Frekvenční rozsah76 MHz (FM broadcast), 108-470 MHz (AM/FM)
Počet baterií2 AA-size batteries (included)
Typ zobrazeníLCD/LED
VodotěsnýŽádný

Záruka a podpora

The Alinco DJ-X82 Analog Communication Receiver comes with a 1letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For technical support, warranty claims, or to download the free editing software, please visit the official Alinco Electronics Division webUschovejte si doklad o koupi pro případ záručního servisu.

© 2024 Alinco. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.