Návod k obsluze pískového filtračního čerpadla Bestway 58515-7

1. Bezpečnostní informace

WARNING! READ THE INSTRUCTION MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

Always ensure the pump is disconnected from the power supply before performing any maintenance or adjustments. Do not operate the pump if the power cord is damaged. Keep children away from the pump during operation. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. Konec produktuview

The Bestway 58515-7 Sand Filter Pump is designed for efficient filtration of above-ground pool water. It features a pump flow rate of 3,596 L/h and is compatible with pools ranging from 1,100 to 18,100 L. The durable, corrosion-resistant filter tank ensures long-lasting performance. It comes pre-assembled with a 360° rotatable flange clamp for simplified installation and includes a 6-position valve for various functions and a pre-filter basket to capture larger debris.

3. Součásti

The Bestway 58515-7 Sand Filter Pump includes the following main components:

• Písková filtrační nádrž
• Jednotka motoru čerpadla
• 6-Position Control Valve
• Tlakoměr
• Koš s předfiltrem
• Hadice a Clamps
• Napájecí kabel

4. Nastavení

4.1 Preparing the Filter Tank

1. Ensure the drain plug at the bottom of the filter tank is securely closed.
2. Remove the 6-position control valve from the top of the filter tank.
3. Carefully add the appropriate filter media (pool filter sand or Bestway Polysphere filter balls) into the tank. Refer to the product specifications for the correct amount.

4.2 Připojení čerpadla

1. Place the pump on a solid, level surface, ensuring it is at least 2 meters (6.5 feet) away from the pool.
2. Connect the hoses from the pool's skimmer/return outlets to the pump's inlet and outlet ports using the provided clamps. The pump's inlet (suction) connects to the pool's skimmer, and the pump's outlet (return) connects to the pool's return jet.
3. Attach the 6-position control valve back onto the filter tank, ensuring a tight seal.
4. Ujistěte se, že všechna připojení jsou bezpečná, aby nedošlo k únikům.

5. Obsluha čerpadla

5.1 6-Position Valve Functions

The multi-port valve allows for different operational modes:

5.2 Spuštění čerpadla

1. Ensure the pool is filled to the appropriate level and all hoses are connected.
2. Nastavte 6polohový ventil na FILTR pozice.
3. Zapojte čerpadlo do uzemněné elektrické zásuvky.
4. Stisknutím tlačítka napájení spusťte čerpadlo.
5. Check the pressure gauge. If the pressure is too high, the filter media may need backwashing.

6. Údržba

6.1 Regular Cleaning (Backwash and Rinse)

Perform backwashing when the pressure gauge indicates high pressure (typically 0.2-0.3 bar above the starting pressure) or when water flow to the pool decreases significantly.

1. Turn off the pump and unplug it.
2. Nastavte 6polohový ventil na BACKWASH pozice.
3. Plug in and turn on the pump. Run for approximately 2-3 minutes or until the water in the sight glass (if available) runs clear.
4. Turn off the pump and unplug it.
5. Nastavte 6polohový ventil na Oplach pozice.
6. Plug in and turn on the pump. Run for 30-60 seconds.
7. Turn off the pump and unplug it.
8. Nastavte 6polohový ventil zpět do FILTR pozice.
9. Plug in and turn on the pump for normal operation.

6.2 Pre-Filter Basket Cleaning

1. Turn off the pump and unplug it.
2. Close the inlet and outlet valves to the pump.
3. Unscrew the pre-filter cover and remove the basket.
4. Clean any debris from the basket.
5. Reinsert the basket and securely close the cover.
6. Open the inlet and outlet valves and restart the pump.

7. Řešení problémů

8. Specifikace