1. Bezpečnostní informace
Please read these safety instructions carefully before using the Speedlink EXCELLO NX RGB Headset Stand. Keep this manual for future reference.
- Nevystavujte zařízení vlhkosti, extrémním teplotám ani přímému slunečnímu záření.
- Nepokoušejte se zařízení rozebírat ani upravovat. Mohlo by dojít ke zrušení záruky a poškození.
- Používejte pouze s kompatibilními USB zdroji napájení.
- Uchovávejte mimo dosah dětí.
- Zařízení čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
2. Obsah balení
Ujistěte se, že v balení jsou přítomny všechny položky:
- Speedlink EXCELLO NX RGB Headset Stand
- Integrated USB-A Connection Cable (1.2m)
3. Konec produktuview
The Speedlink EXCELLO NX is a multifunctional RGB headset stand designed to keep your gaming headset organized while providing additional connectivity options. It features dynamic RGB lighting and an integrated USB hub.
Obrázek 3.1: Přední strana view of the EXCELLO NX RGB Headset Stand, showcasing its design and illuminated base.
Klíčové vlastnosti:
- RGB osvětlení: 9 different lighting modes, controllable via a touch sensor.
- Integrovaný USB rozbočovač: Includes 1x USB-C port and 2x USB-A ports for connecting additional devices.
- Prostorově úsporný design: Keeps your headset organized and desk clutter-free.
- Stabilní základna: Non-slip underside ensures secure placement on surfaces.
Figure 3.2: Detail of the integrated USB hub, showing one USB-C and two USB-A ports.
4. Pokyny k nastavení
Follow these steps to set up your EXCELLO NX RGB Headset Stand:
- Vybalte stojan: Carefully remove the headset stand from its packaging.
- Umístěte stojan: Place the stand on a stable, flat surface on your desk. Ensure the non-slip base is fully in contact with the surface.
- Připojení k napájení/datům: Plug the integrated USB-A cable from the headset stand into an available USB-A port on your computer or a compatible USB power adapter. The stand will power on, and the RGB lighting will activate.
- Place Headset: Hang your gaming headset on the designated holder at the top of the stand.
Obrázek 4.1: Boční profíkfile of the headset stand, illustrating its stable design for holding a headset.
5. Návod k obsluze
5.1. Ovládání RGB osvětlení
The EXCELLO NX features a touch sensor for controlling its RGB lighting modes. The touch sensor is located on the base of the stand.
- Jediný dotyk: Tap the touch sensor to cycle through the 9 available RGB lighting modes.
- Dlouhé stisknutí: Press and hold the touch sensor for approximately 3 seconds to turn the RGB lighting off. Repeat the long press to turn it back on to the last selected mode or default.
Obrázek 5.1: Úhlové view showing the illuminated light strip and the base where the touch sensor is located.
5.2. Použití USB rozbočovače
The integrated USB hub allows you to connect additional devices directly to the headset stand.
- Port USB-C: Use this port to connect devices that require a USB-C connection for charging or data transfer.
- Porty USB-A (x2): Use these two ports to connect standard USB-A devices such as mice, keyboards, USB drives, or for charging other peripherals.
Note: The USB hub operates at USB 2.0 speeds. Ensure your computer's USB port provides sufficient power for all connected devices.
6. Údržba
To ensure the longevity of your EXCELLO NX RGB Headset Stand, follow these simple maintenance guidelines:
- Čištění: Wipe the stand with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials.
- Skladování: Pokud stojan delší dobu nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření.
- Péče o kabely: Avoid bending or crimping the integrated USB cable excessively.
7. Řešení problémů
If you encounter issues with your EXCELLO NX RGB Headset Stand, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| RGB osvětlení se nezapíná. | Žádné napájení nebo uvolněné připojení. | Ensure the USB-A cable is securely connected to a powered USB port on your computer or adapter. Try a different USB port. |
| USB hub devices are not recognized. | Insufficient power or driver issue. | Connect the stand to a USB port that provides sufficient power. Try connecting devices directly to your computer to rule out driver issues. Disconnect and reconnect the device. |
| RGB lighting is stuck on one mode or unresponsive. | Temporary software glitch or sensor issue. | Disconnect the stand from its power source for a few seconds, then reconnect it. Ensure the touch sensor area is clean and unobstructed. |
If the problem persists, please contact Speedlink customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | SL-800911-BK |
| Rozměry (D׊×V) | 150 x 113 x 275 mm (5.91 x 4.45 x 10.83 palce) |
| Hmotnost | 226 g (8 unce) |
| USB porty | 1x USB-C, 2x USB-A (USB 2.0) |
| Připojení k počítači | USB-A (integrated cable) |
| Délka kabelu | 1.2 m |
| Osvětlení | RGB with 9 modes, touch sensor control |
| Barva | Černý |
9. Záruka a podpora
Speedlink products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Speedlink webmísto.
For technical support or customer service inquiries, please visit the Speedlink support page or contact their customer service department directly. Contact information can typically be found on the Speedlink webmísto: www.speedlink.com