KOHLER K-87466 Faucet Extension Stem

1. Úvod

This manual provides instructions for the proper installation, operation, and maintenance of the KOHLER K-87466 Extension Stem. This genuine Kohler part is designed to extend the height of existing Kohler faucet stems, ensuring compatibility and reliable performance within your plumbing system. Please read this manual thoroughly before beginning installation.

Image 1.1: The KOHLER K-87466 Extension Stem, a brass component designed to add height to faucet stems.

2. Bezpečnostní informace

Během instalace a údržby vždy dodržujte následující bezpečnostní opatření:

• Vypněte přívod vody: Before starting any plumbing work, ensure the main water supply to the faucet is completely shut off to prevent water damage.
• Noste ochranné pomůcky: Use appropriate personal protective equipment, such as safety glasses, to protect against potential debris or splashes.
• Poraďte se s odborníkem: Pokud si nejste jisti některým krokem instalace, poraďte se s kvalifikovaným instalatérem.
• Používejte správné nástroje: Ensure you have the proper tools for the job to avoid damaging the product or existing plumbing.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• KOHLER K-87466 Extension Stem (Quantity as purchased, e.g., 1 or 3)

Požadované nástroje (nejsou součástí dodávky)

• Adjustable wrench or appropriate size wrench
• Screwdriver (for faucet handle removal, if applicable)
• Instalatérská páska (volitelné, pro závitové spoje)
• Měkká látka

4. Nastavení a instalace

Follow these steps to install the KOHLER K-87466 Extension Stem:

1. Připravte si pracovní prostor: Clear the area around the faucet. Place a towel or cloth in the sink basin to catch any drips or dropped parts.
2. Uzavření přívodu vody: Locate the water supply valves under the sink and turn them clockwise until fully closed. Turn on the faucet to drain any remaining water and confirm the supply is off.
3. Demontáž rukojeti a lišty kohoutku: Carefully remove the faucet handle and any decorative trim to expose the existing faucet stem. This usually involves unscrewing a set screw or prying off a cap. Refer to your faucet's specific instructions if needed.
4. Access Existing Faucet Stem: Once the handle and trim are removed, the top of the existing faucet stem should be visible.
5. Attach Extension Stem: Align the KOHLER K-87466 Extension Stem with the top of the existing faucet stem. The extension stem is designed to fit securely onto the existing stem. Gently push and twist until it seats properly. Ensure a snug fit. If desired, apply a small amount of plumber's tape to the threads for an extra seal, though it may not be necessary for this type of connection.
6. Znovu sestavte kohoutek: Carefully reattach the faucet handle and any decorative trim in reverse order of removal. Ensure all components are secure but do not overtighten.
7. Obnovení zásobování vodou: Slowly turn the water supply valves counter-clockwise to open them.
8. Zkontrolujte netěsnosti: Turn on the faucet and inspect all connections for any signs of leaks. If leaks are detected, shut off the water supply, re-check the connections, and tighten as necessary.

5. Provoz

The KOHLER K-87466 Extension Stem is a passive component that functions by increasing the effective height of your faucet's internal stem. Once installed, it allows for the proper reattachment and operation of your faucet handle at an elevated position, providing additional clearance or accommodating specific faucet designs. No special operational steps are required beyond the normal use of your faucet.

6. Údržba

The KOHLER K-87466 Extension Stem requires minimal maintenance. To ensure its longevity and proper function:

• Čištění: Clean the visible parts of the extension stem (if exposed) with a soft cloth and mild, non-abrasive soap and water. Rinse thoroughly and dry.
• Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or material of the stem.
• Pravidelná kontrola: Periodically check the faucet assembly for any signs of leaks or loose connections. Address any issues promptly.

7. Řešení problémů

If you encounter issues after installing the extension stem, consider the following:

• Leakage at Faucet Base:
  • Ujistěte se, že všechny spoje jsou řádně utaženy.
  • Verify that the extension stem is fully seated onto the existing faucet stem.
  • If applicable, reapply plumber's tape to threaded connections.
• Faucet Handle Not Operating Smoothly:
  • Check that the faucet handle is correctly aligned and secured to the extension stem.
  • Ensure no internal components are binding or misaligned.
• Extension Stem Does Not Fit:
  • Confirm that your faucet uses genuine Kohler parts and is compatible with the K-87466 extension stem. This product is designed to work only with Kohler parts.

If problems persist, contact Kohler customer support or a qualified plumber.

8. Specifikace

Image 8.1: The KOHLER K-87466 Extension Stem shown with a ruler, indicating an approximate length of 2 inches.

9. Záruka a podpora

For detailed warranty information and customer support, please refer to the official Kohler website or contact Kohler customer service directly. Genuine Kohler parts are backed by Kohler's commitment to quality and performance.

Kohler Customer Service: Návštěva www.kohler.com for support, product registration, and warranty details.