FLEXISPOT QB2M-1880-IE Height-Adjustable Desk User Manual

Zavedení

This manual provides essential instructions for the assembly, operation, and maintenance of your FLEXISPOT QB2M-1880-IE Height-Adjustable Desk. Please read this manual thoroughly before use to ensure proper function and safety. This desk is designed to provide a versatile workspace, allowing seamless transitions between sitting and standing positions.

Image: The FLEXISPOT QB2M-1880-IE Height-Adjustable Desk in a typical office setup, showcasing its spacious maple desktop and white dual-motor frame.

Bezpečnostní informace

• Maximální nosnost: Do not exceed the recommended maximum load of 120 kg (264 lbs). Overloading can cause instability and damage.
• Stabilní umístění: Ensure the desk is positioned on a flat, stable surface to prevent tipping or collisions during height adjustments.
• Jasné okolí: Keep the area around the desk clear of obstructions during height adjustments to avoid pinching or damage to objects.
• Děti a domácí mazlíčci: Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu.
• Napájecí kabel: Ensure the power cord is not pinched or damaged. Disconnect power before cleaning or maintenance.
• Protikolizní systém: The desk is equipped with an anti-collision system. However, always exercise caution and monitor the desk's movement.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Desktop (multi-piece)
• Desk Frame (legs, crossbar)
• Duální motory
• Ovládací panel
• Napájecí adaptér a kabel
• Hardware Kit (screws, tools)
• Návod k použití

Nastavení a montáž

Follow these general steps for assembling your FLEXISPOT height-adjustable desk. Refer to the included assembly diagram for detailed illustrations.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch, abyste zabránili poškrábání.
2. Sestavte rám: Attach the desk legs to the crossbar using the provided hardware. Ensure all connections are secure.
3. Install Motors: Secure the dual motors within the frame structure as indicated in the assembly guide.
4. Připojit plochu: Place the desktop sections onto the assembled frame. The desktop is composed of multiple parts designed to connect securely. Fasten the desktop to the frame using the appropriate screws.
5. Připojení ovládacího panelu: Mount the control panel to the underside of the desktop in a convenient location. Connect the control panel and motors to the power adapter unit.
6. Správa kabelů: Use cable ties or clips (if provided) to organize and secure all cables, preventing them from interfering with desk movement.
7. Počáteční zapnutí: Plug the power cable into a wall outlet. The desk may perform an initial calibration cycle.

Image: Product details showing the desk dimensions (180cm x 80cm) and illustrating that the desktop is made of 4 parts.

Image: Diagram illustrating the dual motor lift system, highlighting its stability, 120kg maximum load, 25 mm/s lifting speed, and quiet operation (<50 dB).

Návod k obsluze

Funkce ovládacího panelu

The intelligent control panel allows for easy height adjustment and memory presets.

Image: Close-up of the intelligent control panel with buttons for up/down adjustment, four memory presets, and an LED screen.

• Tlačítka nahoru/dolů (^ / v): Press and hold to continuously adjust the desk height. Release to stop at the desired position.
• Předvolby paměti (1, 2, 3, 4):
  1. Nastavte stůl do požadované výšky pomocí tlačítek Nahoru/Dolů.
  2. Press the "M" or "SET" button (if present, otherwise directly press the number) followed by one of the number buttons (1, 2, 3, or 4) within 3 seconds. The LED display will show "S-" followed by the number, indicating the height is saved.
  3. To recall a saved height, simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically move to the saved position.
• Funkce proti kolizi: The desk is equipped with an anti-collision system. If the desk encounters an obstruction during movement, it will automatically stop and reverse slightly to prevent damage.

Image: Illustration of the desk's height adjustment range, from 72cm (sitting) to 121cm (standing).

Image: Comparison showing the anti-collision function preventing an object from being crushed (left) versus a system without it (right).

Údržba

• Čištění: Otřete pracovní plochu a rám měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit povrchovou úpravu.
• Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Správa kabelů: Ujistěte se, že kabely jsou úhledně uspořádány a nepřekážejí při pohybu stolu.
• Mazání: The lifting mechanism is generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by FLEXISPOT support.

Odstraňování problémů

If you encounter issues not listed here or if solutions do not resolve the problem, please contact FLEXISPOT customer support.

Specifikace

Image: Close-up of the thickened table legs (70cm height shown) designed for enhanced stability.

Image: Visual representation of the desk's 120kg weight capacity and the thick 75x45mm table legs ensuring stability.

Image: Depiction of the desk's smooth and quiet operation, highlighting automatic rebound, 25mm/s lifting speed, and noise level below 50 dB.

Záruka a podpora

For warranty information, technical support, or to inquire about replacement parts, please refer to the warranty card included with your product or visit the official FLEXISPOT website. Please have your model number (QB2M-1880-IE) and purchase date ready when contacting support.