1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your GIDERWEL 2.4GHz Wireless LED Controller with 4 Zone Remote Control Kit. This system is designed to control RGBW LED strip lights, offering dimming, color changing, and multi-zone control capabilities.
Obsah balení:
- 2x RGBW LED Controllers (Model C04RF)
- 1x RF Remote Control (requires 2x AAA batteries, not included)
- 1x Mounting Bracket for Remote Control
2. Konec produktuview
The GIDERWEL 2.4GHz Wireless LED Controller system allows for flexible and convenient control of your RGBW LED lighting. It features a 4-zone remote control, enabling independent or synchronized control of multiple LED strip segments.

Image: The GIDERWEL RGBW LED Controller and its accompanying 4-zone RF remote control.
Klíčové vlastnosti:
- 4-Zone Remote Control: Independently manage LED lights in up to four distinct areas.
- Ovládání skupiny: Pair multiple controllers to a single remote for simultaneous control of all connected LED strips.
- Bezdrátové vysílání 2.4G: Controllers can relay signals to other controllers within 98 feet (30 meters), extending the effective control range.
- Dimmable and Color Changing: Access 16 million colors and pure white light, with adjustable brightness for each color.
- Wide Voltage Podpora: Compatible with DC5V, DC12V, and DC24V LED strip lights.
3. Nastavení
3.1 Průvodce zapojením
Ensure all power is disconnected before wiring. The controller supports DC5V-DC24V input. The DC power socket is 5.5mm*2.5mm. Connect your RGBW LED strip to the output terminals, matching the V+, R, G, B, and W connections.

Image: Detailed wiring diagram showing connection of a DC power supply and an RGBW LED strip to the controller. Input is DC 5.5mm x 2.1mm plug or high power wired terminals. Output is 4 channel 5 wire for 6A/CH.
Důležité: Voltage of your power supply must match the voltage requirement of your LED strip (e.g., use a DC12V power supply for a 12V LED strip).
3.2 Pairing the Remote Control with the Controller
To link the remote control to a controller, follow these steps:
- Ensure the LED strip is connected to the controller and the controller is powered off.
- Switch off the power to the LED controller. Wait for 10 seconds.
- Switch on the power to the LED controller.
- Within 3 seconds of powering on, short press the 'I' (Zone ON) button on the remote control 3 times for the desired zone (1, 2, 3, or 4).
- The LED strip will flash 3 times slowly, indicating successful linking.
Video: Demonstration of pairing the GIDERWEL RF remote control with an LED controller. The video shows the steps of powering off, waiting, powering on, and pressing the 'I' button three times to link the devices.
To unlink, repeat the process, but press the 'I' button 5 times quickly. The LED strip will flash 5 times quickly to confirm unlinking.
4. Návod k obsluze
4.1 Funkce dálkového ovládání
Familiarize yourself with the buttons on the RF remote control:

Image: Diagram of the 4-Zone RF Remote Control, labeling buttons such as Master ON/OFF, Color Ring, Brightness +/-, Dynamic Modes, White Light, Color Temp/Saturation, Speed +/-, and Zone ON/OFF buttons.
- Hlavní ON/OFF: Turns all linked lights on or off.
- Barevný prsten: Touch to select desired color.
- Jas +/-: Upravuje úroveň jasu.
- M (Dynamic Modes): Prochází různými dynamickými režimy osvětlení.
- W (bílé světlo): Aktivuje režim čistě bílého světla.
- Color Temp / Saturation: Adjusts color temperature or saturation depending on the mode.
- Rychlost +/-: Upravuje rychlost dynamických režimů.
- Zone 1-4 ON/OFF: Independently turns on/off or links/unlinks specific zones.
4.2 4zónové ovládání
The remote allows you to control up to four independent zones. Each zone can have one or more controllers linked to it. This enables you to manage lighting in different rooms or areas separately.

Image: An illustration of a house floor plan divided into four zones (bedroom, dining room, kids room, living room), showing how one remote can control LED lights in these separate areas.
4.3 Skupinová kontrola
To control multiple controllers simultaneously, link them all to the same zone on your remote. Alternatively, use the Master ON/OFF button to control all zones at once.

Obrázek: Exteriér view of a house with LED lights in various colors, demonstrating how one remote control can manage all connected LED lights (C04RF Controllers) at the same time.
4.4 Dimming and Color Change
Use the color ring on the remote to select from 16 million colors. Press the 'W' button for pure white light. Adjust brightness using the Brightness +/- buttons. The system allows for fine-tuning of both color and intensity to create desired lighting moods.

Image: A bedroom setting illustrating the dimming capability from 100% to 1% brightness, and a color wheel graphic indicating 16 million colors available for selection.
5. Údržba
The GIDERWEL LED Controller and Remote Kit require minimal maintenance. Keep the devices clean and dry. Avoid exposing them to extreme temperatures or humidity. Replace remote control batteries (2x AAA) as needed.
6. Řešení problémů
- Světla nereagují:
- Check if the remote control batteries are installed correctly and have sufficient charge.
- Ensure the controller is properly powered and the LED strip is securely connected.
- Ověřte, zda je dálkový ovladač správně spárován s ovladačem (viz kapitola 3.2).
- Ensure the remote is within range of the controller.
- Incorrect colors or partial lighting:
- Confirm that the LED strip is an RGBW type and not just RGB, as this controller is designed for RGBW.
- Check all wiring connections between the LED strip and the controller for proper polarity and secure contact. Loose or incorrect wiring can cause color discrepancies.
- Přerušovaná regulace:
- Reduce obstacles between the remote and the controller.
- Ujistěte se, že žádná jiná zařízení pracující na frekvenci 2.4 GHz nezpůsobují rušení.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | GIDERWEL |
| Název modelu | C04RF |
| Barva | RGBW |
| Technologie připojení | Rádiová frekvence (2.4 GHz) |
| Vstupní objemtage | DC5V-DC24V |
| Maximální výstupní proud | 6A/Channel, Total 12A Max |
| Maximální počet podporovaných zařízení | 4 (Zones) |
| Maximální dosah | 98 30 stop (XNUMX XNUMX metrů) |
| Vzdálený typ baterie | AAA (vyžadováno 2) |
| Rozměry ovladače | Přibližně 75 mm x 33 mm x 15 mm (2.95 palce x 1.3 palce x 0.6 palce) |
8. Záruka a podpora
This GIDERWEL product comes with a 1-letá záruka from the date of purchase. For technical support, warranty claims, or further assistance, please contact GIDERWEL customer service through your retailer or visit the official GIDERWEL webmísto.