NEEWER DR-BLK22

NEEWER DMW-BLK22 AC Power Supply Adapter & DC Coupler Dummy Battery Kit User Manual

Model: DR-BLK22

1. Úvod

This manual provides instructions for the NEEWER DMW-BLK22 AC Power Supply Adapter and DC Coupler Dummy Battery Kit. This kit is designed to provide continuous power to compatible Panasonic Lumix cameras, eliminating the need for frequent battery changes during extended shooting sessions.

Kompatibilita

This DMW-BLK22 dummy battery kit is compatible with the following Panasonic Lumix camera models:

  • DC-S9
  • DC-G9 II
  • DC-S5
  • DC-S5 II
  • DC-S5 IIX
  • GH5 II
  • GH6
  • S5II
  • S5IIX
  • S5M2
  • S5M2X
  • GH5M2
NEEWER DMW-BLK22 dummy battery connected to a Panasonic Lumix camera, illustrating compatibility.

Image: The NEEWER DMW-BLK22 dummy battery connected to a Panasonic Lumix camera, demonstrating how it fits into the battery compartment. This image highlights the product's compatibility with various camera models.

2. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

  • 1 x DMW-BLK22 Dummy Battery (DC Coupler)
  • 1 x AC / DC adaptér
  • 1 x AC Power Cord (Type A - 2 pin, North American)
Contents of the NEEWER DMW-BLK22 kit: dummy battery, AC adapter, and power cord.

Image: A visual representation of the package contents, including the DMW-BLK22 dummy battery, the AC/DC adapter, and the AC power cord.

3. Pokyny k nastavení

Follow these steps to properly set up your NEEWER DMW-BLK22 power supply kit:

  1. Otevřete přihrádku na baterie: Locate and open the battery compartment cover on your camera. Ensure the power connector port, usually located on the cover, is accessible.
  2. Insert the Dummy Battery: Carefully insert the DMW-BLK22 DC Coupler (dummy battery) into the camera's battery slot. Ensure it is correctly oriented and fully seated.
  3. Zavřete přihrádku na baterie: Route the dummy battery's cable through the designated power connector port on the battery compartment cover. Close the battery compartment cover completely. Note: The camera will not power on if the battery cover is not fully closed.
  4. Connect to AC Adapter: Connect the cable from the dummy battery to the AC/DC adapter.
  5. Připojte ke zdroji napájení: Connect the AC power cord to the AC/DC adapter, then plug the power cord into a standard AC outlet.
  6. Zapnutí: Turn on your camera. It should now receive continuous power from the AC outlet.
Four-step installation guide for the NEEWER DMW-BLK22 dummy battery into a camera.

Image: A visual guide showing the four steps for installing the dummy battery: opening the compartment, inserting the dummy battery, closing the cover with the cable routed, and connecting to power.

Nastavení Video průvodce

Video: An official NEEWER video demonstrating the installation process of the DMW-BLK22 dummy battery kit for Panasonic cameras. This video provides a visual walkthrough of the setup steps.

4. Návod k obsluze

The NEEWER DMW-BLK22 kit is designed for continuous power supply to your camera, ideal for extended shooting sessions, studio work, time-lapses, or when downloading and viewmédia.

  • Trvalý výkon: Once properly installed and connected to an AC outlet, the kit provides uninterrupted power to your camera.
  • Bez nabíjení baterie: This dummy battery serves solely to provide constant power. It does NOT charge your camera's internal battery or any other batteries.
  • Fully Decoded: The dummy battery is fully decoded, which means your camera should recognize it as a valid power source without displaying error messages or warnings related to non-original batteries.
Camera screen showing 100% battery with the dummy battery installed, indicating full decoding.

Image: A close-up of a camera screen displaying a 100% battery indicator, confirming that the fully decoded dummy battery is providing stable power without triggering warnings.

5. Údržba

To ensure the longevity and optimal performance of your NEEWER DMW-BLK22 power supply kit, follow these maintenance guidelines:

  • Čištění: Use a soft, dry cloth to clean the dummy battery, AC adapter, and power cord. Avoid using liquid cleaners or solvents.
  • Skladování: Pokud sadu nepoužíváte, skladujte ji na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
  • Péče o kabely: Avoid bending or crimping the cables excessively. Do not place heavy objects on the cables.
  • Inspekce: Periodically inspect the cables and connectors for any signs of damage, such as fraying or exposed wires. Discontinue use if any damage is found.

6. Řešení problémů

If you encounter issues with your NEEWER DMW-BLK22 power supply kit, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Fotoaparát se nezapne.
  • Battery compartment cover is not fully closed.
  • Volné spojení mezi komponenty.
  • Problém s elektrickou zásuvkou.
  • Ensure the battery compartment cover is securely closed, with the cable routed through the designated port.
  • Check all connections (dummy battery to adapter, adapter to power cord, power cord to outlet) are firm.
  • Otestujte zásuvku pomocí jiného zařízení.
Camera displays a battery warning or error message.
  • Battery compartment cover not fully closed.
  • Faulty dummy battery or adapter.
  • Re-check that the battery compartment cover is fully closed.
  • Ensure the dummy battery is correctly inserted.
  • Pokud problém přetrvává, požádejte o pomoc zákaznickou podporu.
Power supply feels hot.
  • Normální provoz (mírné teplo).
  • Overheating due to malfunction.
  • Mírné zahřívání je normální. Pokud se zařízení nadměrně zahřeje, okamžitě jej odpojte a kontaktujte podporu.
  • Ensure proper ventilation around the AC adapter.
AC adapter with glowing circuits, illustrating multiple circuit protection features.

Image: An illustration highlighting the multiple circuit protection features of the AC adapter, including protection against overheating, overcharge, overvoltage a zkrat.

7. Specifikace

FunkceDetail
ModelDR-BLK22
Vstupní objemtage100-240V AC, 50/60Hz, 1.0A Max
Výstupní objemtage9V DC
Výstupní proud3A
Wattage27W
Typ konektoruMini USB (for dummy battery connection)
ZástrčkaTyp A - 2kolíkový (severoamerický)
Speciální funkceShort Circuit Protection, Overheating Protection, Overcharge Protection, Overvoltage Ochrana, nadproudová ochrana
Hlavní materiálPlastic (ABS + PC shell)
Pracovní teplota14°F–122°F / -10°C–50°C
Skladovací teplota-4°F–140°F / -20°C–60°C
Kompatibilní zařízeníPanasonic Lumix DC-S9, DC-G9 II, DC-S5, DC-S5 II, DC-S5 IIX, GH5 II, GH6, S5II, S5IIX, S5M2, S5M2X, GH5M2 Cameras
Detailed diagram of the NEEWER DMW-BLK22 kit components with dimensions and specifications.

Image: A comprehensive diagram showing the individual components of the power supply kit, including the dummy battery, AC adapter, and power cord, along with their respective lengths and key specifications.

8. Záruka a podpora

Informace o záruce

This NEEWER product is covered by a 1 roky záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

Záruka se nevztahuje na poškození způsobené:

  • Accident, abuse, misuse, or neglect.
  • Neoprávněná oprava nebo úprava.
  • Nesprávná instalace nebo provoz, který není v souladu s touto příručkou.
  • External causes such as power surges or lightning.

Zákaznická podpora

For technical assistance, warranty claims, or any questions regarding your NEEWER DMW-BLK22 power supply kit, please contact NEEWER customer support through their official webna webu nebo u prodejce, kde byl produkt zakoupen.

Please have your product model (DR-BLK22) and proof of purchase ready when contacting support.

© 2026 NEEWER. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.