CLY LED Security Light with Motion Sensor and Remote Control

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your CLY LED Security Light with Motion Sensor and Remote Control. This 42W, 3600LM outdoor floodlight features three adjustable heads, a 5000K daylight white output, IP66 waterproof rating, and multiple operating modes controlled by a remote. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The CLY LED Security Light, featuring three adjustable light heads and a motion sensor, shown alongside its remote control.

Bezpečnostní informace

• Před instalací, údržbou nebo čištěním se ujistěte, že je odpojeno napájení.
• Instalaci by měl provádět kvalifikovaný elektrikář nebo osoba s dostatečnými znalostmi elektrických systémů.
• Do not attempt to modify or disassemble the product. This will void the warranty and may cause electrical hazards.
• Ujistěte se, že montážní povrch je stabilní a unese hmotnost svítidla.
• Udržujte výrobek mimo dosah hořlavých materiálů.
• The PIR sensor may be affected by working surroundings such as heat sources or strong winds. Install in a location protected from direct rain, such as under an eave, to prevent water intrusion into the sensor.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x CLY LED Security Light
• 1 x Remote Control (with 1 Lithium Polymer battery included)
• 1 x Návod k použití
• Mounting Hardware (screws, wall anchors, wire nuts)

Konec produktuview

The CLY LED Security Light features a robust design with three independently adjustable light heads and an integrated motion sensor. The included remote control allows for convenient adjustment of settings without needing to access the fixture directly.

Image: A diagram illustrating the adjustable light heads, showing a 270° beam angle and 180° detection range. It also indicates an ideal mounting height of 4-6 meters (13.12-19.69 feet) and an optimum light range of over 10x10 square meters.

Nastavitelné světelné hlavy: The two smaller side heads can be rotated 180° horizontally (left and right) and 90° vertically (up and down). The main central head and the motion sensor can be rotated 180° vertically (up and down). This flexibility allows for precise illumination and coverage.

Specifikace

Instalace

Follow these steps for proper installation. Ensure power is OFF at the circuit breaker before starting.

Image: A visual guide depicting six steps for quick installation, including mounting the bracket, attaching the fixture, wiring, securing the light, adjusting heads, and using the remote.

1. Připravte montážní povrch: Choose a suitable location for installation (wall or ceiling) at an ideal height of 5-7 meters (19.69-26.25 feet). Mark the drilling points for the mounting bracket.
2. Instalace montážního držáku: Drill holes and secure the mounting bracket to the surface using the provided screws and wall anchors.
3. Kabelové připojení: Connect the light's wires to your household electrical wiring. Typically, connect the Live wire (black) to Live, Neutral wire (white) to Neutral, and Ground wire (green/bare copper) to Ground. Use wire nuts to secure connections. Ensure all connections are tight and insulated.
4. Připevnění svítidla: Secure the light fixture to the installed mounting bracket.
5. Nastavení světelných hlavic a senzoru: Loosen the screws on the light heads and motion sensor to adjust their angles. The side heads can rotate 180° horizontally and 90° vertically. The main head and sensor can rotate 180° vertically. Tighten screws once desired angles are set.
6. Obnovit napájení: Turn on the power at the circuit breaker. The light is now ready for operation.

Návod k obsluze

The CLY LED Security Light is operated using the included remote control. Ensure the remote's battery is installed correctly.

Funkce dálkového ovládání

Image: A detailed diagram of the remote control, showing buttons for ON/OFF, 24-hour detection, night detection, brightness adjustment, detection distance adjustment, lighting duration, and timing function.

• ON/OFF (Red Button): Toggles the light on or off. When in constant light mode, press this to turn off. To switch from constant light mode to sensor mode, press OFF, then select the desired sensor mode.
• 24 Hours Detection Mode (Sun Icon): Activates motion detection during both day and night.
• Night Detection Mode (Moon Icon): Activates motion detection only when it is dark.
• Brightness +/- (Light Bulb Icons): Upravuje jas světla od 10 % do 100 %.
• Detection Distance +/- (Wave Icons): Adjusts the motion sensor's detection distance to 50%, 80%, or 100% (approx. 6M, 9M, 12M).
• Lighting Duration (45S, 90S, 120S, 5min, 10min): Sets how long the light stays on after motion is detected in sensor modes.
• Timing Function (1H, 2H, 3H): Sets the light to stay on continuously for 1, 2, or 3 hours, after which it automatically switches to sensor mode.

Pracovní režimy

Image: A grid showing the four distinct working modes of the security light: Mode 1 (PIR 24H), Mode 2 (PIR Night Only), Mode 3 (Always On), and Mode 4 (Timing 1H/2H/3H).

1. Mode 1: 24 Hours Detection Mode (PIR Work for 24H)

   The light will automatically turn on whenever motion is detected, regardless of whether it is day or night. The light duration and detection distance can be adjusted via the remote.
2. Mode 2: Night Detection Mode (PIR Only Work at Night)

   The light will only turn on automatically when motion is detected at night or in low-light conditions. The light duration and detection distance can be adjusted via the remote.

3. Mode 3: Constant On Mode (Always On)

   The light will stay on continuously until manually turned off or switched to another mode. This mode provides maximum illumination for extended periods.

4. Mode 4: Timing Function (1H/2H/3H)

   The light will remain on for a set duration (1, 2, or 3 hours) and then automatically switch to the previously selected sensor mode (Mode 1 or Mode 2).

Adjusting Sensing Settings

Image: A visual representation of the adjustable settings, including five lighting time options (45s to 10min), three detection distance levels (50% to 100%), and a brightness adjustment range.

• Délka osvětlení: In Mode 1 and Mode 2, use the 45S, 90S, 120S, 5min, or 10min buttons on the remote to set how long the light remains active after motion ceases.
• Detekční vzdálenost: In Mode 1 and Mode 2, use the 50%, 80%, or 100% buttons to adjust the sensor's range. 100% corresponds to approximately 12 meters (39.37 feet).
• Jas: In all modes, use the Brightness +/- buttons to set the desired light intensity from 10% to 100%.

Údržba

• Čištění: Pravidelně čistěte svítidlo a čočku pohybového senzoru měkkým hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Před čištěním se ujistěte, že je přístroj vypnutý.
• Inspekce: Regularly check the mounting hardware and electrical connections for any signs of wear, damage, or looseness.
• Odolnost vůči počasí: The light is IP66 rated for water resistance. However, ensure the sensor is not directly exposed to heavy rain if possible, as prolonged direct exposure can affect its performance.

Image: The CLY LED Security Light installed on a building during a rainstorm, illustrating its IP66 waterproof rating, heat resistance, and frost resistance for reliable outdoor performance.

Odstraňování problémů

Záruka a podpora

This CLY LED Security Light comes with a 2-year replacement service warranty od data nákupu.

For any questions, technical assistance, or warranty claims, please refer to the service email address provided in your physical instruction manual. You may also contact CLY customer service through Amazon, and a representative will respond within 24 hours.

Aplikační scénáře

Obrázek: Koláž z obrázkůasing the CLY LED Security Light installed in various settings, including garages, driveways, patios, and poolside areas, highlighting its versatility for both outdoor and indoor use.

The CLY LED Security Light is suitable for a wide range of applications, including:

• Garáže a dílny
• Driveways and parking lots
• Yards, gardens, and patios
• Front doors, porches, and eaves
• Storage rooms and sheds
• Commercial and residential outdoor areas