HEIMAN Smoke Detector Instruction Manual

1. Konec produktuview

The HEIMAN Networked Radio Networkable Smoke Detector provides enhanced safety for your home. These intelligent devices communicate wirelessly with each other, ensuring that if one detector senses smoke, all interconnected units will sound an alarm. This feature provides an early warning system, even if the fire source is in a different room. Designed for ease of installation and long-term reliability, the detectors feature a 10-year battery life, minimizing maintenance. For comprehensive protection, it is recommended to install a networked smoke detector in every room, hallway, and on each floor of your property.

Obrázek 1.1: Konecview of HEIMAN networked smoke detectors demonstrating their wireless interconnection capability.

Image 1.2: The HEIMAN smoke detector installed on a ceiling, providing safety in a home environment.

2. Klíčové vlastnosti

• Bezdrátové propojení: Connects with other HEIMAN smoke detectors, ensuring all units alarm simultaneously when smoke is detected by any single unit.
• Snadná instalace: Designed for quick, tool-free mounting on ceilings.
• Highly Sensitive Sensor: Equipped with a reliable photoelectric sensor that detects even minute smoke particles, providing timely alerts.
• Prodloužená životnost baterie: Features a long-lasting battery with a service life of up to 10 years, significantly reducing maintenance requirements.
• Funkce ztlumení: Includes a convenient mute button to temporarily silence the alarm, useful during activities like cooking.

3. Obsah balení

Po otevření balení se prosím ujistěte, že jsou všechny součásti přítomny a nepoškozené:

• HEIMAN Smoke Detector Unit(s)
• Adhesive Smoke Detector Pad (for optional mounting)
• Screw Kits (screws and wall plugs for mounting)
• Uživatelská příručka (tento dokument)
• 1 x CR123A Battery (pre-installed or included)

Image 3.1: Contents of the HEIMAN smoke detector package.

4. Nastavení a instalace

The HEIMAN smoke detector is designed for straightforward installation. Follow these steps for proper setup and interconnection:

4.1. Identifikace součásti

Image 4.1: Key components of the HEIMAN smoke detector.

• Bzučák: Vydává zvuk alarmu.
• Power/Test Mute Button: Used for testing the alarm, muting, and pairing.
• LED indikátor: Provides visual status of the device.
• Vchod pro kouř: Where smoke enters the detection chamber.
• Baterie: Powered by a 1x CR123A/CR17335 Lithium Battery.

4.2. Montáž detektoru

Choose a suitable location for your smoke detector, typically on the ceiling in central areas, hallways, and bedrooms. Avoid placing near vents, windows, or in kitchens where cooking fumes might cause false alarms.

1. Ensure the battery is correctly inserted. The detector should activate upon battery insertion.
2. Using the provided screws and wall plugs, securely attach the mounting plate to the ceiling. Alternatively, use the adhesive pad for a tool-free installation on a clean, flat surface.
3. Twist the smoke detector unit onto the mounting plate until it clicks into place.

4.3. Interconnecting Multiple Detectors

For a comprehensive safety network, interconnect all your HEIMAN smoke detectors. Up to 40 wireless alarms can be interconnected.

Image 4.2: Visual representation of interconnected smoke detectors.

1. Designate a Host Device: Select one smoke detector to be the "Host" or "Master" unit. It is recommended to apply a distinguishing sticker (if provided) to this unit.
2. Initiate Pairing on Host: On the designated Host device, press the central button three times quickly, then press and hold it once. The device will beep and its LED will flash, indicating it is in pairing mode.
3. Pairing Secondary Devices: For each additional smoke detector you wish to interconnect, press its central button twice quickly, then press and hold it once. The device will beep and flash, confirming successful pairing with the Host.
4. Opakujte pro všechny jednotky: Continue this process for all other detectors you want to include in the network. If pairing multiple devices, you may need to re-initiate pairing mode on the Host device after a short period (e.g., 1 minute) if it exits pairing mode.
5. Verify Interconnection: After pairing all units, perform a test (see Section 5.1) to ensure all interconnected alarms sound when one is triggered.

Note: The pairing process can be sensitive to timing. If a device does not pair, repeat the steps carefully.

5. Návod k obsluze

5.1. Testování alarmu

It is crucial to test your smoke detectors regularly (e.g., monthly) to ensure they are functioning correctly.

• To test a single unit, press and hold the central Power/Test Mute Button for approximately one second. The alarm will sound, and the LED will flash.
• If units are interconnected, triggering the test on one unit should cause all interconnected units to sound their alarms.
• The alarm sound level is 85 dB.

5.2. Funkce ztlumení

The mute function allows you to temporarily silence the alarm in situations where non-emergency smoke (e.g., from cooking) might trigger it.

• When the alarm sounds, press the central Power/Test Mute Button briefly. This will silence the alarm for a temporary period.
• The detector will automatically reset after the mute period or if smoke levels persist or increase.

5.3. Stav indikátoru LED

The LED indicator provides visual feedback on the detector's status:

• Normální provoz: A brief flash approximately every 53 seconds indicates the detector is functioning correctly.
• Poplach: Rapid flashing and continuous alarm sound.
• Slabá baterie: The LED will flash along with a chirp sound, indicating the battery needs replacement.
• Režim párování: Specific flashing patterns during the interconnection process.

6. Údržba

Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho detektoru kouře.

• Životnost baterie: The detector is equipped with a 10-year lithium battery. This battery is not user-replaceable. The device will signal when the battery capacity falls below a certain level, indicating the end of its operational life.
• Čištění: Dust and debris can affect the detector's sensitivity. Gently vacuum the exterior of the detector using a soft brush attachment at least once a month. Do not use cleaning sprays or solvents.
• Testování: Perform a test of the alarm system monthly as described in Section 5.1.
• Konec života: After 10 years from the installation date, the detector should be replaced. The back label of the detector indicates the model and other details.

Obrázek 6.1: Zadní strana view of the smoke detector with product information and a reminder to replace after 10 years.

The barcode on the back of the device is 01012460070000023.

7. Řešení problémů

If you encounter issues with your HEIMAN smoke detector, refer to the following common problems and solutions:

8. Specifikace

Detailed technical specifications for the HEIMAN Smoke Detector (Model 2SA-633):

Image 8.1: Dimensions of the HEIMAN smoke detector.

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. HEIMAN is the manufacturer of this product.

Doporučuje se uschovat si doklad o koupi pro případné reklamace.