Uživatelská příručka k digitálnímu inteligentnímu multimetru ANENG 621A

1. Úvod

The ANENG 621A is a versatile digital smart multimeter designed for accurate and wide-ranging electrical measurements. It features an automatic identification system for measurement content, a large color LCD touch screen, and a built-in flashlight for enhanced usability in various environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ANENG 621A multimeter.

2. Bezpečnostní informace

Při používání elektrických zkušebních zařízení vždy dodržujte bezpečnostní opatření.

• Ensure the multimeter is in good working condition before each use.
• Nepřekračujte maximální vstupní hodnoty uvedené pro každou funkci.
• Používejte vhodné osobní ochranné prostředky (OOP), jako jsou izolační rukavice a ochranné brýle.
• Během měření se nedotýkejte obnažených vodičů nebo součástek obvodu.
• The device features a double fuse and flame-retardant casing for overload protection. However, exercise caution to prevent damage or injury.
• Do not operate the multimeter in wet conditions or explosive atmospheres.
• Refer to local electrical codes and safety standards for specific applications.

3. Konec produktuview

The ANENG 621A multimeter is equipped with a range of features for comprehensive electrical testing.

3.1 Klíčové vlastnosti

• Funkce měření: AC/DC proud, AC/DC objemtage, Resistance, Frequency, Duty Cycle, Capacitance, Continuity, Diode, Temperature, Live/Zero Line Detection.
• Inteligentní režim: Automatic identification of measurement content and optimal resolution selection.
• Zobrazit: Large color LCD with backlight for clear readings in various lighting conditions.
• Nabíjecí: Built-in lithium battery, charged via Type-C USB.
• Bezpečnost: Double fuse, flame-retardant, overload protection, shockproof ABS casing with soft rubber grip.
• Další vlastnosti: Flashlight, Non-Contact Voltage (NCV) detection, Real-time temperature display, Low battery indication, Auto-sleep mode.

3.2 Komponenty

Balíček obsahuje následující položky:

• 1x ANENG 621A Multimeter
• 1x Combined Test Lead Set (4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 measuring pens, 2 alligator clips, 2 puncture needles)
• 1x Standard Multimeter Test Leads
• 1x teplotní sonda
• 1x nabíjecí kabel typu C
• 1x Návod k obsluze (tento dokument)
• Zásobník 1x

Figure 1: ANENG 621A Digital Smart Multimeter with test leads.

Obrázek 2: Přesview of ANENG 621A Multimeter's key features and icons, including voltage, current, resistance, capacitance, flashlight, diode, smart anti-burn, temperature, live detection, power sensing, reverse display, data retention, and auto-shutdown.

4. Nastavení

4.1 Počáteční nabíjení

Before first use, fully charge the multimeter using the provided Type-C USB cable. Connect the cable to the multimeter's charging port and a standard USB power adapter (not included).

Figure 3: The ANENG 621A Multimeter connected to a USB power strip for charging via its Type-C port.

4.2 Připojení měřicích kabelů

Insert the red test lead into the 'VΩmA' input jack and the black test lead into the 'COM' input jack for most measurements. For high current measurements (10A), insert the red lead into the '10A' jack.

5. Návod k obsluze

The ANENG 621A features a smart mode that automatically detects the measurement type. You can also manually select functions using the touch screen.

5.1 Smart Mode (AUTO)

Upon powering on, the multimeter defaults to Smart Mode (AUTO). In this mode, it automatically identifies and measures AC/DC voltage, resistance, and continuity without manual selection. Simply connect the test leads to the circuit or component to be measured.

Figure 4: ANENG 621A Multimeter with test leads connected to a power outlet, displaying AC voltage and frequency. Icons for rechargeable, resistance, AC/DC voltage, AC/DC current, diode, buzzer, capacitance, frequency, temperature, NCV induction, and Live/Zero detection are shown.

5.2 Ruční výběr funkce

To select specific functions not automatically detected by Smart Mode, use the touch screen buttons:

• svtage (stř./stejnosměr.): Touch the 'V' icon. The multimeter will automatically detect AC or DC.
• Odpor (Ω): Touch the 'Ω' icon.
• Kapacita (F): Touch the 'F' icon.
• Dioda/Kontinuita: Touch the diode/continuity icon. Press again to toggle between diode test and continuity buzzer.
• Frequency (Hz)/Duty Cycle (%): Touch the 'Hz' icon.
• Teplota (°C/°F): Connect the temperature probe to the input jacks and select the temperature function.
• AC/DC Current (A/mA): Ensure test leads are correctly inserted into the '10A' or 'VΩmA' jack as appropriate. Select the current function.

5.3 Nekontaktní svtage (NCV) Detekce

Activate the NCV function by touching the 'NCV' button. Bring the top of the multimeter near a live wire or electrical outlet. The device will indicate the presence of AC voltage through an audible alarm and a visual bar graph on the display.

Figure 5: ANENG 621A Multimeter performing a Non-Contact Voltage (NCV) test near a power outlet, indicating signal detection with a beep and a full signal bar.

5.4 Live/Zero Line Detection

Touch the 'Live' button. Use the red test probe to touch the conductor. The display will indicate 'LIVE' for live wire and 'ZERO' for neutral wire, accompanied by an audible alert.

5.5 Svítilna

Press the flashlight button to activate the built-in LED flashlight for illumination in dark work areas.

Figure 6: ANENG 621A Multimeter showing its flashlight function in a dim environment and the backlit display for clear readability day or night.

6. Údržba

6.1 Čištění

Otřete multimetr casing s reklamouamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Před čištěním se ujistěte, že je zařízení vypnuté a odpojené od všech obvodů.

6.2 Péče o baterii

The ANENG 621A uses a rechargeable lithium battery. Recharge the battery when the low battery indicator appears. For long-term storage, charge the battery to approximately 50% and store the device in a cool, dry place. Recharge every few months to maintain battery health.

6.3 Skladování

Store the multimeter and its accessories in the provided storage bag to protect them from dust, moisture, and physical damage. Avoid storing in extreme temperatures.

Figure 7: ANENG 621A Multimeter with its shockproof silicone sleeve, illustrating its durability against impacts.

7. Řešení problémů

8. Specifikace

Figure 8: Detailed dimensions of the ANENG 621A Multimeter, illustrating its compact size.

9. Záruka a podpora

ANENG offers lifetime service and technical support for the 621A Digital Smart Multimeter. For any issues, questions, or technical assistance, please contact ANENG customer support through your purchase platform or the official ANENG webmísto.