1. Úvod
This manual provides detailed instructions for the Hilitand ZL-166 Handheld GPS Land Area Meter. This device is designed for accurate land area and length measurement, featuring a durable, waterproof, and dustproof design. It utilizes a U-chip and GPS positioning for precise results, making it suitable for various outdoor measurement tasks.
Image 1.1: The Hilitand ZL-166 Handheld GPS Land Area Meter, showing its compact design and display.
2. Obsah balení
Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:
- 1 x Land Area Meter (Model: ZL-166)
- 1 x USB kabel
- 1x přenosné lano
- 1 x Adaptér
- 1 x Návod k použití
Image 2.1: The USB adapter included with the Hilitand ZL-166 device.
3. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | ZL-166 |
| Materiál | ABS |
| Panel | TFT 2.4in, Resolution 240x320 |
| Přesnost polohování | ≤1.5 m |
| Rozsah měření plochy | 0-99999 Hectares |
| Rozsah měření délky | 0-99999999 m |
| Relative Accuracy of Area | Track Tolerance: ±2m |
| Počet záznamů | 100 |
| Baterie | 3.7V 2500mAH Lithium Battery |
| Okolní teplota | 20-60 °C |
| Vlhkost | 5–95 % |
| Hmotnost | Přibl. 375 g / 13.2 oz |
| Velikost produktu | 15x6x3cm / 5.9x2.4x1.2in |
| Speciální funkce | Vodotěsný |
| Technologie připojení | USB |
| Typ zobrazení | LCD |
4. Nastavení
4.1 Nabíjení zařízení
- Připojte dodaný kabel USB k nabíjecímu portu na zařízení.
- Plug the other end of the USB cable into the adapter, then plug the adapter into a standard wall outlet.
- Allow the device to charge fully before first use. The charging indicator on the screen will show the battery status.
4.2 Zapnutí/vypnutí
- To power on: Press and hold the power button (usually located on the side or top) until the screen illuminates.
- To power off: Press and hold the power button until a power-off prompt appears, then confirm.
Image 4.1: The device display showing GPS signal strength and coordinates.
5. Návod k obsluze
Ujistěte se, že zařízení je čisté view of the sky for optimal GPS signal reception before beginning any measurement.
5.1 Automatic Track Measurement (Area)
This method is used to measure the area of a plot by walking its perimeter.
- Navigate to the 'Area Measurement' mode on the device.
- Once positioned and GPS signal is acquired, press the 'Start' or 'OK' button to begin tracking.
- Walk along the boundary of the area to be measured, ensuring you complete a full circuit back to your starting point.
- Press the 'End' or 'OK' button to finalize the measurement. The device will display the calculated area.
Image 5.1: The device shown in different land measurement scenarios, including fields and natural landscapes.
5.2 Curve Measurement (Length)
This method measures the length of a curved path or boundary.
- Enter the 'Curve Measurement' interface after the device has acquired a stable GPS position.
- Click 'Confirm' or 'OK' to mark the starting point (Point A).
- Walk along the desired curve to the end point (Point B).
- Click 'End' or 'OK' to complete the measurement. The device will display the total length of the path.
5.3 Straight Line Measurement (Length)
This method measures the straight-line distance between two points.
- Enter the 'Straight Line Measurement' interface after the device has acquired a stable GPS position.
- Click 'Confirm' or 'OK' to mark the starting point (Point A).
- Move to the desired end point (Point B).
- Click 'End' or 'OK' to complete the measurement. The device will display the straight-line distance between Point A and Point B.
Image 5.2: The device display illustrating the measurement of a path between point A and point B in a field.
6. Údržba
- Čištění: Otřete zařízení měkkým, damp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
- Skladování: Přístroj skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Péče o baterie: Pro optimální výdrž baterie se vyvarujte častého úplného vybíjení. Zařízení pravidelně nabíjejte, zejména pokud jej delší dobu skladujete.
- Vodotěsný / prachotěsný: The device has an IP-class waterproof rating. While it is designed for harsh environments, avoid submerging it in water for prolonged periods or exposing it to high-pressure water jets. Ensure all port covers are securely closed.
Obrázek 6.1: Zadní strana view of the Hilitand ZL-166 device, displaying the model number ZL166.
7. Řešení problémů
- Zařízení se nezapíná: Ensure the battery is charged. Connect the device to the charger and attempt to power on after a few minutes.
- Žádný signál GPS: Přejděte na otevřené místo s volným view of the sky, away from tall buildings or dense foliage. Allow several minutes for the device to acquire satellites.
- Nepřesná měření: Ensure you are walking at a consistent pace and following the perimeter accurately. Verify that the GPS signal is strong before starting a measurement.
- Obrazovka nereaguje: Try restarting the device. If the issue persists, ensure the screen is clean and free from moisture.
8. Záruka a podpora
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Hilitand webUschovejte si doklad o koupi pro případ reklamace.