TURN RAISE AT040 210° Two-Way Articulating Borescope User Manual

1. Úvod

Thank you for choosing the TURN RAISE AT040 210° Two-Way Articulating Borescope. This industrial endoscope is designed for detailed visual inspection in hard-to-reach areas, featuring a dual-lens system, a 7-inch IPS display, and a flexible articulating probe. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use.

2. Konec produktuview

2.1 Klíčové vlastnosti

• 210° Two-Way Articulating Probe: Allows precise control and locking of the probe tip for optimal viewing úhly.
• Systém s dvojitým objektivem: Front and side cameras for comprehensive inspection, supporting split-screen display.
• 7palcový IPS displej: Provides a wide and clear view of inspection areas.
• 0.25-inch (6.5mm) Slim Probe: Designed for access into small diameter gaps.
• Nastavitelné LED osvětlení: Integrated lights on the probe with adjustable brightness for clear visibility in dark environments.
• Foto a videozáznam: Capture images and videos to a 32GB memory card.
• Ergonomický design: Facilitates comfortable one-hand operation.
• Vestavěná baterie 4000 mAh: Nabízí až 4 hodin nepřetržitého provozu.
• Sonda s krytím IP67: Water-resistant for use in damp nebo vlhké podmínky.

2.2 Obsah balení

• Borescope with light (Main Unit) x1
• Přepravní pouzdro x1
• Nabíjecí kabel typu C x 1
• Uživatelská příručka x1
• 32GB Memory Card (pre-installed or separate) x1

2.3 Součásti zařízení

Figure 1: Main components of the TURN RAISE AT040 Borescope, including the display unit, articulating probe, and protective carrying case.

Figure 2: The large 7-inch IPS screen provides a clear and detailed view during inspections.

Figure 3: The ultra-slim 0.25-inch (6.5mm) probe allows access into very narrow spaces.

3. Nastavení

3.1 Nabíjení zařízení

1. Connect the provided Type-C charging cable to the charging port on the borescope unit.
2. Druhý konec kabelu připojte ke standardnímu napájecímu adaptéru USB (není součástí balení) nebo k portu USB počítače.
3. The charging indicator will illuminate. A full charge typically takes approximately 4 hours. Ensure the device is fully charged before first use for optimal battery life.

3.2 Vložení paměťové karty

The device supports a 32GB memory card for storing images and videos. If not pre-installed, locate the memory card slot (usually on the side of the display unit) and gently insert the card until it clicks into place. Ensure the card is inserted in the correct orientation.

3.3 Připojení sondy

The articulating probe is typically pre-attached. If it needs to be connected, align the connector on the probe cable with the port on the main unit and secure it firmly. Do not force the connection.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Zapnutí: Stiskněte a podržte tlačítko napájení (⏻) na několik sekund, dokud se obrazovka nerozsvítí.
• Vypnutí: Stiskněte a podržte tlačítko napájení (⏻), dokud se obrazovka nevypne.

4.2 Basic Navigation and Menu

Use the directional buttons and the 'OK' button to navigate through menus and confirm selections. The 'Menu' button typically accesses settings such as resolution, date/time, and language.

4.3 Articulating Probe Control

Figure 4: The probe tip can be articulated up to 210 degrees in two directions using the control wheel.

The AT040 features a 210° two-way articulating probe. To control the probe tip:

1. Locate the control wheel on the handle of the borescope.
2. Rotate the wheel to bend the probe tip in the desired direction.
3. The probe tip can be locked at any angle by holding the wheel in position, allowing for stable viewIng.

4.4 Dual-Lens and Split-Screen Functionality

Obrázek 5: Rozložené view of the dual-lens camera system, providing 1080P HD imaging.

The borescope is equipped with both a front-facing and a side-facing lens. To utilize this feature:

• Press the dedicated dual-lens button (refer to device interface for icon, typically two overlapping squares or similar) to switch between single front view, single side viewnebo zobrazení na rozdělené obrazovce.
• In split-screen mode, both camera feeds are shown simultaneously on the 7-inch IPS screen, enhancing inspection efficiency.

4.5 Nastavení jasu LED diod

Figure 6: The IP67 rated probe features adjustable LED lights for optimal illumination in various conditions.

To adjust the brightness of the LED lights on the probe tip:

• Locate the LED brightness control button (often indicated by a light bulb icon).
• Press the button repeatedly to cycle through different brightness levels or use a dedicated dial if available.

4.6 Pořizování fotografií a videí

The borescope supports capturing JPG images and AVI video recordings.

• Chcete-li pořídit fotografii: Press the 'Photo' button (typically a camera icon). The image will be saved to the inserted memory card.
• Chcete-li nahrát video: Press the 'Video' button (typically a video camera icon) to start recording. Press it again to stop recording. Videos are saved to the memory card.
• The device also supports audio recording via a built-in microphone during video capture.

4.7 Flexible Rigid Gooseneck

Figure 7: The flexible rigid gooseneck probe can be bent and shaped to suit various inspection needs.

The probe cable is designed to be flexible yet rigid enough to hold its shape. This allows you to bend, shape, and extend the probe to navigate complex pathways and maintain the desired viewing angle during inspection.

5. Údržba

5.1 Čištění

• Probe and Lens: After each use, especially in dirty environments, gently wipe the probe and camera lenses with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Ensure no liquid enters the probe tip.
• Displej: Clean the IPS screen with a soft, lint-free cloth. Avoid abrasive cleaners.
• Hlavní jednotka: Otřete hlavní jednotku suchým nebo lehce navlhčeným hadříkem.amp tkanina. Neponořujte hlavní jednotku do vody.

5.2 Péče o baterii

• Chcete-li prodloužit životnost baterie, vyvarujte se častého úplného vybíjení.
• Zařízení pravidelně nabíjejte, i když jej nepoužíváte, abyste zachovali jeho stav.
• Pokud zařízení delší dobu nepoužíváte, skladujte jej na chladném a suchém místě.

5.3 Skladování

Store the borescope and its accessories in the provided carrying case to protect it from dust, impacts, and environmental damage. Keep it away from extreme temperatures and direct sunlight.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact the TURN RAISE customer support directly. Keep your purchase receipt as proof of purchase.