VIRIBUS Electric Tricycle Instruction Manual

1. Bezpečnostní informace

Always prioritize safety when operating your VIRIBUS Electric Tricycle. Read all instructions carefully before assembly and use. Failure to follow safety guidelines may result in serious injury or damage to the product.

• Vždy noste helmu a vhodné bezpečnostní vybavení.
• Před každou jízdou se ujistěte, že jsou všechny komponenty bezpečně upevněny.
• Do not operate the tricycle under the influence of alcohol or drugs.
• Dodržujte místní dopravní předpisy a předpisy.
• Pravidelně kontrolujte správnou funkci brzd, pneumatik a baterie.
• Udržujte ruce a nohy v dostatečné vzdálenosti od pohyblivých částí.

2. Co je v krabici

Po vybalení zkontrolujte, zda jsou všechny komponenty přítomny:

• 1x Adult Electric Tricycle
• 1x Nabíječka
• 1x Baterie
• 1x napájecí kabel
• 1x Fastener Set
• 1x Šroubovák
• 1x Wrench Set
• 1x Návod k použití
• 1x Rear Basket
• 1x Horn
• 1x zámek
• 1x Sada nářadí

3. Nastavení a montáž

Follow these steps to assemble your VIRIBUS Electric Tricycle. For a visual guide, please refer to the assembly video below.

1. Rozbalení a počáteční nastavení: Carefully remove all components from the packaging. (Refer to Video 1: 0:00)
2. Instalace řídítek: Insert the handlebar stem into the frame and tighten the screw securely. (Refer to Video 1: 0:08)
3. Instalace řetězu: Remove the frame protection, pass the chain through the chainwheel, connect the chain, and ensure it is locked. Then, install the chain onto the flywheel. Adjust the rear axle to ensure smooth chain operation and tighten the four screws. (Refer to Video 1: 0:18 - 1:43)
4. Instalace pedálu: Install the pedals. Note that the 'R' pedal installs by turning clockwise, and the 'L' pedal installs by turning counterclockwise. (Refer to Video 1: 1:44)
5. Montáž blatníku: Assemble the front fender by attaching its support stay. Install the red reflectors and support stays on both the rear left and rear right fenders. (Refer to Video 1: 2:00 - 3:39)
6. Headlight and Front Fender Installation: Remove the fork protection. Install the headlight and the assembled front fender onto the front fork simultaneously, then tighten them with screws. (Refer to Video 1: 3:40 - 4:03)
7. Montáž předního kola: Remove the screws and washers from the front wheel. Place the front wheel onto the fork, connect the motor wire (arrow to arrow), and install the safety hook. Securely tighten all components. (Refer to Video 1: 4:04 - 4:59)
8. Rear Fender Installation: Install the rear fenders onto the rear axle. The process is the same for both the left and right sides. (Refer to Video 1: 5:00 - 5:45)
9. Rear Wheel Installation: Install the rear wheels. Ensure each rear wheel is on the same plane as its respective rear axle and fits perfectly. (Refer to Video 1: 5:46 - 6:28)
10. Brake Installation and Adjustment: Install the left and right brakes by removing the screws and washers from the brake calipers and installing them onto the frame. Adjust the screw on the opposite side of the brake to ensure the brake and brake disc are not in contact. Insert the brake cable, tighten it, and lock it with the screw. (Refer to Video 1: 6:29 - 8:10)
11. Saddle Assembly and Installation: Assemble the saddle onto the seat post and then insert the seat post into the tricycle frame. Adjust to a comfortable height and secure. (Refer to Video 1: 8:11 - 8:28)
12. Rear Basket Assembly and Bag Installation: Assemble the wire mesh rear basket. Once assembled, place the provided bag inside the basket and secure it. (Refer to Video 1: 8:29 - 9:39)
13. Front Reflector and Stem Cap: Install the front reflector onto the handlebar and secure the cap on the stem. (Refer to Video 1: 9:40 - 9:55)
14. Motor Wire Fixation: Securely fix the motor wire to prevent interference or damage during operation. (Refer to Video 1: 9:56 - 10:03)

4. Návod k obsluze

Your VIRIBUS Electric Tricycle offers versatile riding modes and intuitive controls for an enjoyable experience.

4.1 Jízdní režimy

• Režim plynu: Engage the throttle for motor-powered assistance up to 15.5 mph without pedaling.
• Režim pedálového asistenta: Choose from five assistance levels (7.5/9.5/11/13/15.5 mph) to augment your pedaling effort.
• Ruční ovládání: Ride as a traditional tricycle using the 7-speed Shimano derailleur.

Obrázek 1: Visual representation of the three distinct riding modes available on the VIRIBUS Electric Tricycle.

4.2 Intuitive Controls and Display

The LCD display provides essential information at a glance:

• Měřič baterie: Always know your current charge level.
• Rychloměr: Track your speed in MPH or KM/H.
• Úroveň PAS: Select assistance levels 1-5 to run at a percentage of top speed.
• Počítadlo kilometrů: View your trip's distance and total distance traveled.

Obrázek 2: The tricycle's intuitive handlebar controls and LCD display, showing battery, speed, PAS level, and odometer readings.

4.3 Battery and Headlight Usage

The tricycle is equipped with a UL certified 48V 13Ah removable battery. Use the provided key to turn the battery on/off and to remove it for charging or security. The headlight can be activated via the controls on the handlebar. (Refer to Video 1: 10:04)

Obrázek 3: The UL Certified 48V 13Ah battery, highlighting its safety features and dual charging options.

4.4 Nabíjení baterie

To charge the battery, connect the charger to the battery port. The red indicator light on the charger signifies that charging is in progress. The light will turn green when the battery is fully charged. (Refer to Video 1: 10:30)

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vaší elektrické tříkolky.

• pneumatiky: Před každou jízdou zkontrolujte tlak v pneumatikách. Pro optimální výkon a bezpečnost dodržujte doporučený tlak v pneumatikách.
• brzdy: Inspect brake pads and discs regularly for wear. Ensure brake levers are responsive and cables are not frayed. Adjust as needed to maintain effective stopping power.
• Péče o baterie: Po každém použití baterii plně nabijte. Zabraňte úplnému vybití baterie. Pokud baterii nepoužíváte, skladujte ji na chladném a suchém místě.
• Chains: Keep chains clean and lubricated to ensure smooth gear changes and prevent rust.
• Rám a spojovací prvky: Periodically check all bolts, nuts, and fasteners for tightness. Tighten any loose components.
• Čištění: Vyčistěte tříkolku reklamouamp hadříkem. Nepoužívejte vysokotlaké vodní trysky přímo na elektrické součástky.

6. Řešení problémů

Zde jsou některé běžné problémy a jejich možná řešení:

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or any inquiries regarding your VIRIBUS Electric Tricycle, please refer to the contact details provided with your purchase documentation or visit the official VIRIBUS webUschovejte si doklad o koupi pro případ reklamace.