SURNICE Wireless Doorbell Model 98189 Instruction Manual

1. Konec produktuview

The SURNICE Wireless Doorbell Model 98189 offers a convenient and reliable solution for your home's entry alert system. This battery-operated doorbell features a long operating range, multiple melodies, and a durable, waterproof design.

Klíčové vlastnosti:

• Rozšířený rozsah: Operates up to 1300 feet (400 meters), ensuring you hear visitors from anywhere in your home.
• Výběr melodie: Choose from 63 distinct melodies with a 115 dB stereo speaker.
• Odolný design: IP55 waterproof and dustproof doorbell button, designed to withstand various weather conditions from -4°F to 140°F (-20°C to 60°C).
• Snadná instalace: Simple setup with double-sided tape or screws, no wiring required.
• Rozšiřitelný systém: Compatible with additional SURNICE receivers or transmitters for increased coverage.
• Přizpůsobitelné: Includes a DIY nameplate on the doorbell push button.

Figure 1: SURNICE Wireless Doorbell Receiver and Transmitter.

2. Obsah balení

Prosím, ověřte, zda jsou v balení přítomny všechny položky:

• 1 x zvonek
• 1 x Doorbell Transmitter (Push Button)
• 1 x CR2032 Battery (pre-installed in transmitter)
• 2 x oboustranné lepicí pásky
• Mounting Screws and Anchors (optional, for screw mounting)

Figure 2: Included components of the SURNICE Wireless Doorbell kit.

3. Nastavení a instalace

Follow these steps to install your SURNICE Wireless Doorbell.

3.1. Receiver Setup (Chime Unit)

1. Vložte baterie: Open the battery compartment on the back of the receiver. Insert 3 AA batteries (not included), ensuring correct polarity.
2. Umístění: Place the receiver in a central location within your home where the chime can be heard clearly. The receiver does not require a power outlet.

Figure 3: Battery installation for the receiver (3 AA batteries) and transmitter (CR2032 battery).

3.2. Transmitter Setup (Push Button)

The transmitter comes with a pre-installed CR2032 battery. Ensure the battery tab is removed if present.

Vyberte jeden z následujících způsobů instalace:

Method 1: Double-sided Adhesive Installation

1. Čistý povrch: Clean the desired mounting surface (door frame, wall) with a damp cloth and ensure it is dry and smooth.
2. Aplikace pásky: Peel off one side of the protective film from the double-sided adhesive tape and firmly attach it to the back of the doorbell transmitter.
3. Mount Transmitter: Peel off the other side of the protective film and press the transmitter firmly onto the cleaned surface for at least 30 seconds.

Metoda 2: Montáž šrouby

1. Mark Holes: Use the transmitter as a template to mark the positions for drilling holes on the wall or door frame.
2. Vrtací otvory: Drill two small holes at the marked positions. Insert wall anchors if mounting on drywall or masonry.
3. Secure Transmitter: Align the transmitter with the drilled holes and secure it with the provided screws.

Figure 4: Installation methods for the doorbell transmitter.

Důležité: Test the doorbell's range after installation to ensure the signal reaches the receiver effectively. The maximum range is approximately 1300 feet (400 meters) in open areas, which may be reduced by walls and other obstructions.

Figure 5: The doorbell system offers a long operating range of up to 1300 feet.

4. Návod k obsluze

4.1. Změna melodií

Přijímač nabízí 63 různých melodií. Změna melodie:

1. Locate the "M" button on the back of the doorbell receiver.
2. Press the "M" button repeatedly to cycle through the available melodies.
3. The receiver will play each melody as you press the button. Stop pressing when you find your desired melody. The selected melody will be saved automatically.

Figure 6: The receiver offers 63 melodies for selection.

4.2. Nastavení hlasitosti

The doorbell receiver has a volume of 115 dB. While the product description mentions a volume of 115 dB, it does not explicitly state a volume control button. If your model includes a volume button (often labeled "L" or a speaker icon), press it to cycle through volume levels.

4.3. Pairing Additional Transmitters/Receivers (If Applicable)

The SURNICE Wireless Doorbell system is expandable. To pair additional components:

1. Put the receiver into pairing mode (refer to the specific instructions provided with your additional component, usually involves holding a button on the receiver for a few seconds).
2. Press the push button on the new transmitter.
3. The receiver should chime, indicating successful pairing.

5. Údržba a péče

5.1. Výměna baterie

• Přijímač: When the chime sound becomes weak or stops working, replace the 3 AA batteries in the receiver.
• Vysílač: The transmitter uses a CR2032 battery. If the doorbell button stops triggering the chime, replace this battery. To replace, carefully open the transmitter casing (often by prying a small notch) and swap the CR2032 battery.

Poznámka: The CR2032 battery in the transmitter typically has a lifespan of approximately 2 years.

5.2. Čištění

Wipe the doorbell receiver and transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

5.3. Odolnost vůči povětrnostním vlivům

The doorbell transmitter is IP55 waterproof and dustproof, designed to operate in temperatures ranging from -4°F to 140°F (-20°C to 60°C). While it is resistant to splashes and dust, avoid submerging it in water or exposing it to extreme conditions beyond its specified range.

Figure 7: The doorbell transmitter is IP55 waterproof and designed for various weather conditions.

6. Řešení problémů

7. Specifikace produktu

Figure 8: Approximate dimensions of the SURNICE Wireless Doorbell components.

8. Záruka a podpora

SURNICE products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your SURNICE Wireless Doorbell Model 98189, please refer to the contact information provided with your purchase or visit the official SURNICE webmísto.

Můžete také navštívit SURNICE Store on Amazon pro více informací o produktu a zdroje podpory.