1. Úvod
Thank you for choosing the Diymore Plug in Digital Thermostat Temperature Controller. This device is designed to precisely control temperature for various applications, offering both heating and cooling modes, along with advanced timing functions. Please read this manual carefully before operation to ensure proper use and to maximize the product's lifespan.
2. Bezpečnostní informace
- Zajistěte napájení objtage matches the device's specifications (250V, 15A, 2900W max).
- Do not immerse the unit or the temperature probe in water or other liquids.
- Avoid operating the device in excessively humid or dusty environments.
- Nerozebírejte ani neupravujte zařízení. Veškerý servis svěřte kvalifikovanému personálu.
- Uchovávejte mimo dosah dětí.
- Always unplug the device from the power outlet before cleaning or when not in use for extended periods.
3. Vlastnosti produktu
- 5 Temperature Controller Modes: Includes cycle timer, countdown ON, countdown OFF, and countdown ON/OFF modes.
- Přesné digitální ovládání: Temperature range of -40°C to 120°C with ±1% accuracy.
- Nastavení časování: Cycle timing and countdown functions (0-99 hours, 59 minutes). Note: Thermostat and timer functions cannot be used simultaneously.
- HD LED Display: Backlit display for clear visibility in various lighting conditions.
- Úložiště dat: Saves all set parameters after power loss.
- Kalibrace teploty: Supports calibration for enhanced accuracy.
- Resetovací funkce: Allows for easy restoration of default settings.
Obrázek 3.1: Přesview of product features and functionalities.
4. Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- 1 x Diymore Plug in Digital Thermostat Temperature Controller
- 1 x Temperature Probe (1.7m cable)
- 1 x Uživatelská příručka
5. Nastavení
- Connect the Temperature Probe: Insert the temperature probe connector into the designated port on the side of the thermostat unit. Ensure it is securely connected.
- Umístění sondy: Place the metal tip of the temperature probe in the area where you wish to measure and control the temperature. Ensure it is not directly exposed to heat sources or drafts that could skew readings.
- Plug in the Thermostat: Insert the thermostat unit into a standard 3-prong grounded electrical outlet. The display will illuminate.
- Připojit spotřebič: Plug your heating or cooling appliance (e.g., heater, fan, refrigerator) into the outlet on the front of the thermostat unit.
Figure 5.1: Thermostat unit with temperature probe connected.
6. Návod k obsluze
6.1 Základní ovládání a zobrazení
Upon plugging in, the backlit LED display will show the measured temperature, along with the set start (ON) and stop (OFF) temperatures. The unit has four buttons: MODE, SET, UP, and DOWN.
- REŽIM: Cycles through different operating modes (Temperature Control, F01-F04 Timer Modes).
- SOUBOR: Enters setting mode for the currently selected mode.
- NAHORU / DOLŮ: Upravuje hodnoty v režimu nastavení.
6.2. Režim regulace teploty
This is the default mode for regulating temperature. The display shows the current measured temperature, the temperature at which the appliance turns ON, and the temperature at which it turns OFF.
- Nastavení počáteční teploty (ZAP): Stiskněte tlačítko SOUBOR button once. The 'ON' temperature will flash. Use UP or DOLŮ tlačítky pro nastavení požadované spouštěcí teploty.
- Nastavená teplota zastavení (VYP): Stiskněte SOUBOR again. The 'OFF' temperature will flash. Use UP or DOLŮ tlačítky pro nastavení požadované teploty vypnutí.
- Potvrdit nastavení: Stiskněte SOUBOR a third time or wait a few seconds for the settings to be saved automatically.
- Režim topení/chlazení: The device automatically determines heating or cooling based on your set ON/OFF temperatures. If ON temperature < OFF temperature, it's heating mode. If ON temperature > OFF temperature, it's cooling mode.
- Kalibrace teploty: In Temperature Control Mode, press and hold SOUBOR for 3 seconds to enter calibration. Use UP or DOLŮ to adjust the offset. Press SOUBOR potvrdit.
Figure 6.1: Display showing temperature settings.
6.3. Timer Modes (F01-F04)
Stiskněte tlačítko MODE button repeatedly to cycle through the timer modes (F01, F02, F03, F04). Note that the thermostat function and timer functions cannot be used simultaneously.
- F01 Cycle Timer Mode: Sets a repeating cycle of ON and OFF times. Press SOUBOR to adjust ON duration (hours/minutes) and OFF duration (hours/minutes) using NAHORU/DOLŮ.
- F02 Countdown ON Mode: The appliance will turn ON after a set countdown period. Press SOUBOR to adjust the countdown duration (hours/minutes) using NAHORU/DOLŮ.
- F03 Countdown OFF Mode: The appliance will turn OFF after a set countdown period. Press SOUBOR to adjust the countdown duration (hours/minutes) using NAHORU/DOLŮ.
- F04 Countdown ON and Countdown OFF Mode: Combines F02 and F03. The appliance will turn ON after a set countdown, then turn OFF after another set countdown. Press SOUBOR to adjust both countdown durations using NAHORU/DOLŮ.
Obrázek 6.2: Přesview z 5 provozních režimů.
6.4. Data Storage and Reset
The device features a data storage function, automatically saving all set parameters even after a power outage. To reset the device to factory default settings, locate the small reset button (often a pinhole) and press it with a thin object (e.g., a paperclip) until the display briefly flashes or resets.
7. Údržba
- Čištění jednotky: Wipe the thermostat unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
- Péče o sondu: Keep the temperature probe clean and free from debris. Avoid bending or damaging the probe cable.
- Skladování: When not in use for extended periods, store the thermostat in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný | Žádné napájení; uvolněné připojení | Ensure the unit is securely plugged into a live outlet. Check the power source. |
| Nesprávný údaj o teplotě | Probe not connected properly; probe damaged; calibration needed | Check probe connection. Inspect probe for damage. Perform temperature calibration (Section 6.2). |
| Appliance not turning ON/OFF | Incorrect temperature settings; appliance not working; timer mode active | Verify ON/OFF temperature settings. Test the appliance directly. Ensure the unit is in Temperature Control Mode if not using timer functions. |
| Nastavení se neukládají | Settings not confirmed | Ensure you press SET to confirm changes or wait for auto-save. |
9. Specifikace
- Značka: diymore
- Model: B0D5YBKTDL
- svtage: 250 voltů
- Maximální zatížení: 15 A / 2900 XNUMX W.
- Rozsah regulace teploty: -40 °C až 120 °C (-40 °F až 248 °F)
- Přesnost teploty: ±1 %
- Typ ovládání: Ovládání tlačítkem
- Zobrazit: HD LED with Backlight
- Probe Cable Length: 1.7 metrů
10. Záruka a podpora
This Diymore product is covered by a standard manufacturer's warranty. For specific warranty details, technical support, or assistance with troubleshooting beyond what is covered in this manual, please contact Diymore customer service through your purchase platform or the official Diymore website. Please have your model number (B0D5YBKTDL) and purchase information ready when contacting support.