MAXTO M6S Motorcycle Bluetooth Headset Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your MAXTO M6S Motorcycle Bluetooth Headset. Please read this manual thoroughly before using the device to ensure proper function and safety.

Figure 1: MAXTO M6S Bluetooth Headset main unit.

Vlastnosti produktu

• Dual Bluetooth Chip Design: Allows simultaneous intercom communication and music listening.
• DSP/CVC Noise Reduction: Provides clear audio quality by reducing environmental and wind noise.
• Síťový interkom: Supports up to 8 riders within a 1000m range with automatic reconnection.
• Připojení jedním dotykem: Simplifies pairing for multi-person networks.
• Bluetooth 5.0: Ensures stable and fast connections to phones and other devices.
• Automatické přijímání hovorů: Hands-free communication for safety.
• Hlasové ovládání: Access digital assistants for convenient operation.
• Sdílení hudby: Share audio with another M6S intercom user.
• IP67 voděodolný: Designed for use in various weather conditions.

2. Obsah balení

Ověřte, zda jsou všechny níže uvedené položky součástí balení. Pokud některé položky chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• MAXTO M6S Main Unit(s)
• Headset with Speakers and Microphones (Boom and Soft Wire Microphones)
• USB nabíjecí kabel
• Helmet Mounting Clips (Adhesive and Clamp typy)
• Velcro Pads for Speakers and Microphones
• Screwdriver (for clamp mount installation)
• Uživatelská příručka

3. Nastavení

3.1 Nabíjení zařízení

Before first use, fully charge the MAXTO M6S unit. The device has a 10-hour battery life for active use.

• Connect the provided USB charging cable to the charging port on the MAXTO M6S unit.
• Druhý konec kabelu USB připojte ke kompatibilnímu zdroji napájení USB (např. k portu USB počítače, síťovému adaptéru USB).
• The indicator light will show charging status (refer to the user manual for specific light indicators).
• Doba nabíjení je přibližně 10 hodiny pro plné nabití.

3.2 Instalace přilby

The MAXTO M6S can be installed using either the adhesive mount or the clamp mount, depending on your helmet type and preference.

Figure 2: Diagram illustrating various product features and components of the MAXTO M6S.

Speaker and Microphone Placement:

• Remove the helmet's inner padding to access the speaker pockets.
• Attach the Velcro pads to the back of the speakers and inside the helmet's speaker pockets.
• Place the speakers firmly into the pockets.
• Choose either the boom microphone (for open-face helmets) or the soft wire microphone (for full-face helmets).
• Attach the microphone's Velcro pad to a suitable location inside the helmet, ensuring it is close to your mouth for clear audio.
• Route all wires neatly under the helmet padding to avoid discomfort and ensure a secure fit.

Main Unit Mounting:

• Lepicí držák: Clean the desired mounting area on the side of your helmet. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow sufficient time for the adhesive to bond before attaching the main unit.
• Clamp Montáž: Povolte šrouby na třamp mount. Slide the clamp between the helmet shell and the inner padding. Tighten the screws using the provided screwdriver to secure the mount.
• Slide the MAXTO M6S main unit onto the installed mount until it clicks securely into place.

3.3 Pairing with Your Phone (Bluetooth)

The MAXTO M6S uses Bluetooth 5.0 for stable connection to your smartphone.

• Ensure your MAXTO M6S unit is powered off.
• Na smartphonu přejděte do nastavení Bluetooth a povolte Bluetooth.
• Press and hold the multi-function button on the M6S unit until the indicator light flashes red and blue, indicating pairing mode.
• On your smartphone, search for available devices and select "M6S" from the list.
• Once connected, the indicator light on the M6S will turn solid blue or flash blue slowly.

3.4 Mesh Intercom Pairing (Multi-Person Communication)

The M6S supports mesh networking for up to 8 riders, allowing for easy group communication.

Figure 3: Illustration of multiple riders connected via the MAXTO M6S mesh intercom system.

• Ensure all M6S units are in standby mode.
• On all units, press and hold the intercom button for 3 seconds until the red and blue lights flash simultaneously.
• Press the intercom button on any one unit. All M6S units will automatically pair with each other.
• The system features an "automatic communication return" function, allowing units to reconnect automatically if they re-enter the communication range after a temporary disconnection.

4. Návod k obsluze

4.1 Základní ovládací prvky

The MAXTO M6S features intuitive controls for easy operation while riding.

• Zapnutí/vypnutí: Dlouze stiskněte tlačítko napájení.
• Zvýšení/Snížení hlasitosti: Použijte vyhrazená tlačítka hlasitosti (+/-).
• Přehrát/pozastavit hudbu: Krátce stiskněte multifunkční tlačítko.
• Další / předchozí skladba: Long press the volume up/down buttons (refer to manual for exact mapping).

4.2 Přehrávání a sdílení hudby

Enjoy your favorite music and share it with a fellow rider.

Figure 4: The MAXTO M6S features a dual-core dual system for seamless switching between intercom, music, and calls.

• Ensure your M6S is paired with your smartphone.
• Start music playback on your smartphone.
• To share music with another M6S unit, initiate an intercom connection and then activate the music sharing function (refer to the user manual for specific button presses).

4.3 Komunikace přes interkom

Engage in clear conversations with your riding group using the mesh intercom system.

• After successful mesh pairing, short press the intercom button to initiate or end an intercom conversation.
• The dual Bluetooth chip allows you to maintain intercom calls while listening to music.

4.4 Phone Calls and Voice Control

Manage calls and access your phone's voice assistant hands-free.

• Přijmout/ukončit hovor: The headset will automatically answer incoming calls after 10 seconds. You can also short press the multi-function button to answer or end a call.
• Odmítnout hovor: Dlouhým stisknutím multifunkčního tlačítka odmítnete příchozí hovor.
• Hlasový asistent: Activate your smartphone's voice assistant (e.g., Siri, Google Assistant) by a specific button press (refer to manual for details) to make calls, get directions, or control music.

4.5 Potlačení hluku

The M6S features advanced DSP/CVC noise reduction technology.

Figure 5: The MAXTO M6S utilizes dual Qualcomm DSP chips for independent audio processing, enhancing sound quality and noise reduction.

• The system intelligently recognizes and filters environmental noise, including wind noise, to ensure clear communication and music enjoyment.

5. Údržba

5.1 Voděodolnost

The MAXTO M6S is rated IP67 waterproof, providing protection against dust and water immersion up to 1 meter for 30 minutes.

Figure 6: The MAXTO M6S is IP67 waterproof, designed to withstand rain and splashes.

• Ensure all ports (e.g., charging port) are securely closed with their protective covers when not in use to maintain water resistance.
• Avoid prolonged submersion or exposure to high-pressure water jets.

5.2 Obecná péče

• Vyčistěte jednotku měkkým, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Pokud zařízení nepoužíváte, skladujte jej na chladném a suchém místě.
• Vyhněte se extrémním teplotám.

6. Řešení problémů

6.1 Problémy s párováním

• Ujistěte se, že je zařízení plně nabité.
• Verify that the device is in pairing mode (red and blue flashing lights).
• Turn off and restart both the M6S unit and your smartphone/other intercom units.
• Clear previous Bluetooth connections on your smartphone and attempt pairing again.

6.2 Problémy s kvalitou zvuku

• Check speaker placement within the helmet to ensure they are directly over your ears.
• Adjust volume levels on both the M6S and your connected device.
• Ujistěte se, že je mikrofon správně umístěn a není nijak zakrytý.
• Noise cancellation performance may vary with extreme wind conditions or very high speeds.

6.3 Intercom Disconnection

• Ensure all units are within the 1000m mesh network range.
• Obstacles like buildings can affect connection stability. The automatic communication return feature should re-establish connection when back in range.
• Re-initiate mesh pairing if disconnections are frequent.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

For specific warranty details and coverage, please refer to the documentation provided with your purchase or contact the seller directly. Protection plans may be available for extended coverage.

8.2 Zákaznická podpora

If you encounter any issues or have questions regarding your MAXTO M6S headset, please contact the seller, USHuiDa, for assistance. For software updates or app-related queries, you may search for "RICAM apk" in Google to download the latest version.