Tyenaza Ebike LED Display Meter (Waterproof Joint) User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Tyenaza Ebike LED Display Meter. This display is designed for 36V and 48V electric bikes and is compatible with KT controllers, featuring a waterproof joint for enhanced durability. Please read this manual thoroughly before use to ensure proper function and safety.

Obrázek 1.1: The Tyenaza Ebike LED Display Meter installed on an electric bicycle.

2. Vlastnosti produktu

The Tyenaza Ebike LED Display Meter offers a range of features designed to enhance your electric biking experience:

• Široká kompatibilita: Suitable for both 36V and 48V electric bikes, ensuring broad application. It is specifically designed for use with KT controllers.
• Odolná konstrukce: Made from high-quality plastic material, the display panel is lightweight, waterproof, and highly durable, ensuring a long lifespan even in challenging weather conditions.
• Uživatelsky přívětivé rozhraní: Designed for ease of use, allowing simple switching between different display modes and convenient control of various functions on your electric bike.
• Clear and Convenient Display: Equipped with bright LED light beads, the meter accurately shows essential information such as current speed, battery power level, 6KM/H assistance mode, and headlight status.
• Spolehlivý výkon: Its solid construction ensures consistent and dependable performance in various environmental conditions, making it ideal for outdoor use.

Obrázek 2.1: Přední view of the LED display meter, highlighting its clear display and control buttons.

3. Obsah balení

Po otevření balíku se prosím ujistěte, že jsou všechny položky přítomny a nepoškozené:

• 1 x Tyenaza Electric Bike LED Meter (Waterproof Joint)

Obrázek 3.1: The Tyenaza Electric Bike LED Meter with its waterproof connector.

4. Nastavení a instalace

Follow these steps to properly install your Ebike LED Display Meter:

1. Vyberte místo montáže: Select a suitable position on your electric bike's handlebar for the display meter. Ensure it is easily visible and accessible while riding.
2. Montáž displeje: Použijte integrovanou třamp to securely attach the display meter to the handlebar. Tighten the screws firmly but do not overtighten to avoid damage.
3. Připojení k ovladači: Locate the corresponding waterproof connector on your KT controller. Align the pins and firmly push the display meter's waterproof joint into the controller's port until it clicks into place. Ensure the connection is secure and watertight.
4. Správa kabelů: Route the cable neatly along the bike frame, securing it with cable ties if necessary, to prevent it from interfering with moving parts or getting snagged.
5. Počáteční kontrola napájení: After installation, turn on your ebike's main power. The display meter should illuminate, indicating a successful connection.

Obrázek 4.1: The mounting bracket and waterproof connector for installation.

5. Návod k obsluze

Familiarize yourself with the display's functions and controls:

Obrázek 5.1: Nadview of the display panel and its controls.

5.1. Funkce tlačítek

• Tlačítko napájení (Ⓞ):
  • Press and hold to turn the display ON or OFF.
  • A short press may cycle through display modes (if applicable) or activate certain functions.
• Tlačítko nahoru (▲):
  • Increases the assistance level (e.g., from 1 to 5).
  • May be used to navigate menus or increase values in settings.
• Tlačítko dolů (▼):
  • Decreases the assistance level (e.g., from 5 to 1).
  • May be used to navigate menus or decrease values in settings.

5.2. Indikátory na displeji

• Ukazatel rychlosti: Shows your current riding speed (e.g., "6KM/H" for assistance mode, or actual speed if available).
• Úroveň nabití baterie: Displays the remaining battery charge through a series of bars or an icon.
• Assistance Level (1-5): Indicates the current level of pedal assistance provided by the motor. Level 1 is the lowest, and Level 5 is the highest.
• 6KM/H Assistance: A dedicated indicator or mode for low-speed assistance, often used for walking the bike. Activate by holding the Down button.
• Headlight Switch (LIGHT): An indicator that shows if your ebike's headlight is currently on or off. This function is typically controlled by a long press of the Up button or a dedicated button on some models.

6. Údržba

Proper maintenance ensures the longevity and optimal performance of your LED display meter:

• Čištění: Otřete displej a tělo měkkým hadříkemamp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic and screen.
• Vystavení vodě: While the joint is waterproof, avoid submerging the entire unit. If it gets wet, wipe it dry promptly.
• Kontrola kabelů: Periodically check the cable and connectors for any signs of wear, fraying, or damage. Ensure the waterproof joint remains securely connected.
• Skladování: When not in use for extended periods, store the ebike in a dry, temperate environment away from direct sunlight and extreme temperatures.

7. Řešení problémů

If you encounter issues with your Ebike LED Display Meter, refer to the following common problems and solutions:

If you cannot resolve the issue using the troubleshooting guide, please contact Tyenaza customer support for further assistance.

8. Specifikace

Key technical specifications for the Tyenaza Ebike LED Display Meter:

9. Záruka a podpora

Tyenaza products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Tyenaza website. You may also contact Tyenaza customer service directly through the retailer where the product was purchased.

Kontaktní údaje: Please refer to your purchase receipt or the Tyenaza brand store on Amazon for the most current contact details.

Online zdroje: For additional information and FAQs, visit the Tyenaza Store on Amazon.