Fydun Fydunrkt1qmx8oz

Fydun M5 LCD Display 48V 5 Pin Electric Meter User Manual

Model: Fydunrkt1qmx8oz

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of your Fydun M5 LCD Display. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

The Fydun M5 LCD Display is a versatile electric meter designed for electric bikes and scooters. It features a clear display for essential riding data and is built for durability and ease of use.

2. Konec produktuview

The M5 LCD Display offers a clear interface for monitoring your electric vehicle's performance. Key features include:

  • Vodotěsný design: The display is designed to withstand various weather conditions, ensuring reliable operation even in rain.
  • Odolná konstrukce: Built with premium ABS material and sturdy wiring, it ensures a low failure rate and long-term performance.
  • Snadná instalace: Compatible with 31.8mm and 22.2mm mounting apertures, facilitating straightforward installation on most electric bikes and scooters.
  • Náhradní díl: An ideal component for replacing old or damaged displays, restoring full functionality and enhancing the vehicle's appearance.
Fydun M5 LCD Display front view

Obrázek: Přední strana view of the Fydun M5 LCD Display with its control unit and connector cable.

Fydun M5 LCD Display features: Good Replacement, Waterproof Design

Image: Visual representation highlighting the display's waterproof design and suitability as a replacement part.

3. Specifikace

FunkceDetail
Číslo modeluFydunrkt1qmx8oz
svtage Kompatibilita24V, 36V, 48V, 60V Universal
Konfigurace pinů5 Pin Electric Meter
Montážní clona31.8 mm (volitelně 22.2 mm)
MateriálPrémiový ABS
Typ zobrazeníLCD
Fydun M5 LCD Display dimensions and 5-pin connector diagram

Image: Diagram showing the dimensions of the M5 LCD Display and the pinout for the 5-pin connector.

4. Co je v krabici

Po otevření balíčku byste měli najít následující položky:

  • 1 x Electric LCD Meter (Fydun M5 LCD Display)
  • 1 x Návod k obsluze (tento dokument)
  • 1 x propojovací kabel

5. Nastavení a instalace

Follow these steps to properly install your Fydun M5 LCD Display:

  1. Příprava řídítek: Ensure the handlebar area where you intend to mount the display is clean and free from obstructions. The display supports 31.8mm and 22.2mm handlebar diameters.
  2. Montáž displeje: Securely attach the display bracket to your electric bike or scooter's handlebar. Use the appropriate mounting aperture for your handlebar size. Tighten the screws firmly but do not overtighten.
  3. Připojení řídicí jednotky: Attach the separate control unit (buttons) to a convenient location on your handlebar, typically near your thumb for easy access.
  4. Connect the 5-Pin Cable: Locate the 5-pin connector on your electric bike/scooter's controller or wiring harness. Carefully align the pins and connect the display's cable. Ensure a snug fit. Refer to the pinout diagram for correct wiring if you are performing a custom installation or replacement.
  5. Správa kabelů: Route the cables neatly along the handlebar and frame, securing them with cable ties if necessary, to prevent interference with steering or moving parts.
  6. Počáteční zapnutí: After installation, power on your electric bike/scooter to check if the display illuminates and shows data correctly.
Fydun M5 LCD Display mounted on a handlebar with control unit

Image: The M5 LCD Display and its control unit mounted on a bicycle handlebar, showing the typical installation setup.

5-pin connector wiring diagram for Fydun M5 LCD Display

Image: Detailed diagram of the 5-pin connector, indicating the color and function of each wire (Red, Blue, Black, Green, Yellow).

6. Návod k obsluze

The Fydun M5 LCD Display provides real-time information and control for your electric vehicle. Here's how to operate it:

6.1 Zapnutí/vypnutí

  • To power on the display, press and hold the power button (usually the middle button on the control unit) for a few seconds.
  • Chcete-li zařízení vypnout, znovu stiskněte a podržte tlačítko napájení, dokud se displej nevypne.

6.2 Zobrazení informací

The display typically shows the following information:

  • Rychlost: Current riding speed (km/h or mph).
  • Úroveň baterie: An energy bar indicating the remaining battery charge.
  • Vzdálenost cesty: Ujetá vzdálenost během aktuální cesty.
  • tempomat: Indication if cruise control is active.
  • Manuální režim: Indication if manual mode is active.

6.3 Button Functions (Control Unit)

The control unit typically has three buttons:

  • Tlačítko nahoru (▲): Used to increase values, navigate menus, or activate certain functions (e.g., higher assist level).
  • Tlačítko dolů (▼): Used to decrease values, navigate menus, or activate certain functions (e.g., lower assist level).
  • Middle Button (M / Power): Used to power on/off, confirm selections, or switch display modes (e.g., between ODO, Trip, Time).

Note: Specific button functions and display modes may vary slightly depending on the electric vehicle's controller settings. Refer to your vehicle's main manual for advanced settings.

Close-up of the Fydun M5 LCD Display control buttons

Obrázek: Detail view of the three-button control unit, showing the Up, Down, and Middle (M) buttons.

7. Údržba

To ensure the longevity and optimal performance of your Fydun M5 LCD Display, follow these maintenance guidelines:

  • Čištění: Otřete displej a tělo měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit obrazovku neboasing.
  • Vystavení vodě: While the display is waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is always dry before connecting or disconnecting.
  • Kontrola kabelů: Periodically check all cables and connectors for any signs of wear, fraying, or damage. Ensure connections are secure.
  • Skladování: If storing your electric vehicle for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.
  • Vyhněte se dopadu: Protect the display from physical impacts or drops, which can cause internal or external damage.

8. Řešení problémů

If you encounter issues with your Fydun M5 LCD Display, refer to the following common troubleshooting steps:

ProblémMožná příčinaŘešení
Displej se nezapne.
  • Uvolněný nebo odpojený napájecí kabel.
  • Vehicle battery is dead or low.
  • Faulty display or controller.
  • Check all 5-pin connections for secure fit.
  • Charge the vehicle's battery.
  • Contact customer support if connections and battery are fine.
Nesprávné údaje o rychlosti nebo vzdálenosti.
  • Incorrect wheel diameter setting (if adjustable).
  • Porucha snímače.
  • Consult your electric vehicle's main manual for display settings adjustment.
  • Inspect speed sensor and magnet for proper alignment and damage.
Tlačítka nereagují.
  • Control unit cable loose.
  • Porucha vnitřního tlačítka.
  • Check the connection of the control unit to the main display cable.
  • Kontaktujte zákaznickou podporu.

If the problem persists after attempting these solutions, please contact Fydun customer support for further assistance.

9. Záruka a podpora

Fydun products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Fydun webmísto.

When contacting support, please have your product model number (Fydunrkt1qmx8oz) and purchase date available.

Visit the Fydun Store for more information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.