WAC Lighting Round LED 5IN Edgeless Slim Flush Mount User Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your WAC Lighting Round LED 5IN Edgeless Slim Flush Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The WAC Lighting Edgeless Slim Flush Mount features a die-cast aluminum housing with a white acrylic surface, concealing multiple LED arrays for uniform illumination. It includes a 5-CCT selectable switch for adjusting color temperature and is designed for smooth dimming with compatible dimmers.

Image: WAC Lighting Edgeless Slim LED Flush Mount installed, showcasinjeho elegantní design.

Bezpečnostní informace

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení jističem nebo pojistkovou skříní.
• Všechna elektrická připojení musí být v souladu s místními normami a normami NEC (National Electrical Code). Pokud nejste obeznámeni se správným zapojením elektrických vodičů, poraďte se s kvalifikovaným elektrikářem.
• Do not install this fixture in areas with explosive atmospheres.
• Ujistěte se, že je svítidlo bezpečně připevněno k konstrukčně pevnému povrchu.
• Nepřekračujte stanovený objemtage (120 voltů).
• This product is ETL & cETL listed and IP44 rated for wet locations.

Co je v krabici

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, do not attempt to install the product. Contact customer support for assistance.

• Svítidlo
• Montážní deska
• Hardware (screws, wire nuts)
• Pokyny (tato příručka)

Nastavení a instalace

This fixture is designed for simple installation on a standard, slim, or pancake junction box. All necessary mounting hardware is included.

Kroky před instalací:

1. Vypněte napájení jističem nebo pojistkovou skříňkou.
2. Remove the existing fixture (if applicable) and disconnect all wiring.
3. Carefully remove the new fixture and its components from the packaging.

Montáž svítidla:

1. Attach the mounting plate to the junction box using the provided screws. Ensure it is secure.
2. Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are tight and secure.
3. Opatrně zasuňte dráty do rozvodné krabice.
4. Align the fixture with the mounting plate and secure it in place according to the specific design (e.g., twist-lock or screw-in mechanism).

Image: The WAC Lighting 5-inch Round LED Flush Mount, showing its compact design.

Návod k obsluze

Color Temperature Selection (5-CCT):

This fixture features a 5-CCT selectable switch located on the back of the fixture. This switch allows you to choose between five different color temperatures to suit your preference or application.

1. Before final installation or with power off, locate the CCT switch on the back of the fixture.
2. Slide the switch to select your desired color temperature: 2700K (Warm White), 3000K (Soft White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
3. Once selected, proceed with the final mounting of the fixture.

Image: Detail of the 5-CCT selectable switch, showing the different color temperature options.

Image: Illustration demonstrating the visual difference between the five selectable color temperatures.

Funkce stmívání:

The fixture supports smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC (standard LED/CFL) dimmer. It can dim down to 5% of its maximum brightness.

• Ensure you are using a compatible dimmer switch for LED fixtures.
• Follow the dimmer manufacturer's instructions for installation and operation.

Image: Icon representing the dimmable feature of the light fixture.

Údržba

To ensure the longevity and optimal performance of your WAC Lighting fixture, follow these simple maintenance guidelines:

• Čištění: Před čištěním odpojte napájení. Použijte měkký, suchý nebo lehce navlhčený hadřík.amp cloth to wipe the exterior of the fixture. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish or electrical components.
• Inspekce: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician or contact customer support.
• LED diody: The integrated LED light source is designed for long-lasting performance (rated for 50,000 hours) and is not user-replaceable.

Odstraňování problémů

If you encounter issues with your fixture, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact WAC Lighting customer support.

Specifikace

Rozměrové výkresy:

The following diagrams illustrate the dimensions for various round models, including the 5-inch version (FM-240505).

Image: Dimensional drawing for the 5-inch round flush mount (FM-240505).

Image: Dimensional drawing for the 8-inch round flush mount (FM-240508).

Image: Dimensional drawing for the 12-inch round flush mount (FM-240512).

Záruka

WAC Lighting provides an extended warranty for this product. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official WAC Lighting webTato záruka se obvykle vztahuje na vady materiálu a zpracování při běžném používání.

Image: Icon representing a 5-year warranty period.

Podpora

For further assistance, technical support, or warranty claims, please contact WAC Lighting customer service. You can find contact information and additional resources on the official WAC Lighting webmísto:

www.waclighting.com