1. Konec produktuview
The XOSS XR01 is an advanced bicycle tail light designed to enhance cycling safety. It features intelligent automatic lighting, a sensitive brake sensor, and a durable waterproof design. This manual provides detailed instructions for its installation, operation, and maintenance.
Image: XOSS XR01 Smart Tail Light highlighting its key features.
2. Obsah balení
Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:
- XOSS XR01 Tail Light x 1
- Saddle Bracket x 1
- Seatpost Bracket x 1
- Nabíjecí kabel typu C x 1
- Gumička x 1
- Binding Bands x 4
- Návod k použití x 1
3. Instalace
The XOSS XR01 offers two convenient installation methods without requiring any tools.
3.1 Seatpost Mount
Attach the seatpost bracket to your bicycle's seatpost using the provided rubber band. Then, slide the XR01 tail light onto the bracket until it clicks securely into place.
3.2 Saddle Mount
Secure the saddle bracket to the saddle rails using the binding bands. Once the bracket is firm, slide the XR01 tail light onto the bracket until it locks securely.
4. Nabíjení
The XOSS XR01 features a convenient Type-C charging port for quick and efficient power replenishment.
To charge, open the rubber cover on the side of the light to reveal the Type-C port. Insert the provided Type-C charging cable into the port and connect the other end to a USB power source. A full charge takes approximately 1 hour, providing 7-16 hours of use depending on the mode, and up to 3 months of standby time.
Video: Demonstrates Type-C charging and automatic light functions of a bicycle tail light.
5. Provoz
5.1 Zapnutí/vypnutí
Press and hold the power button for 2 seconds to turn the light on or off.
5.2 Přepínání režimů
Once powered on, short press the power button to cycle through the available lighting modes. The XR01 features mode memory, automatically recalling the last used mode when turned on.
5.3 Automatic Lighting/Extinguishing
The XR01 is equipped with a vibration sensor. It will automatically turn on when vibration is detected. If no vibration is detected for 30 seconds, the light will automatically turn off to conserve battery. It will automatically turn back on when vibration is detected again.
5.4 Smart Brake Sensor
The built-in brake sensor detects when you are braking and automatically illuminates the light at maximum brightness, significantly enhancing safety by alerting vehicles behind you.
5.5 Paměť režimů
The device automatically remembers the last used lighting mode before it was turned off, ensuring convenience for your next ride.
Video: Demonstrates various lighting modes and smart features of a bicycle tail light.
6. Údržba
6.1 Hydroizolace
The XOSS XR01 features an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. This allows for continued use even in heavy rain. Ensure the Type-C charging port cover is securely closed to maintain its waterproof integrity.
6.2 Čištění
Otřete světlo měkkým, damp cloth to remove dirt and dust. Avoid using abrasive cleaners or solvents that could damage the surface or lens.
6.3 Skladování
When not in use for extended periods, store the tail light in a cool, dry place. It is recommended to fully charge the battery every three months to prolong its lifespan.
7. Řešení problémů
- Světlo se nerozsvítí: Ujistěte se, že je baterie nabitá. Stiskněte a podržte tlačítko napájení po dobu 2 sekund pro aktivaci.
- Nefunkční brzdový senzor: Check if the light is securely mounted and positioned correctly. Ensure the sensor area is clean and unobstructed.
- Krátká výdrž baterie: Ensure the light is fully charged. Battery life can vary based on the selected lighting mode.
- Vstup vody: If water enters the device, immediately turn it off and allow it to dry completely. Ensure the Type-C port cover is properly sealed during use.
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | XR01 |
| Značka | XOSS |
| Zdroj napájení | Battery Powered (Type-C Rechargeable) |
| Úroveň odolnosti proti vodě | IPX6 Vodotěsný |
| Typ montáže | Seat Mount (Saddle & Seatpost) |
| Speciální funkce | Brake Sensor, Automatic On/Off, Mode Memory, Innovative Optical Lens |
| Doba nabíjení | Přibl. 1 hodina |
| Doba použití | 7–16 hodin (v závislosti na režimu) |
| Pohotovostní doba | Až 3 měsíců |
9. Bezpečnostní informace
- Před jízdou se vždy ujistěte, že je zadní světlo bezpečně upevněno.
- Nedívejte se přímo do rozsvíceného světla, mohlo by dojít k dočasnému zhoršení zraku.
- Uchovávejte mimo dosah dětí.
- Nerozebírejte ani se nepokoušejte zařízení sami opravovat. Požádejte o pomoc zákaznickou podporu.
- Baterii zlikvidujte v souladu s místními předpisy.
10. Záruka a podpora
Your XOSS XR01 Bicycle Tail Light comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding your product, please contact XOSS customer service through the retailer where you purchased the product or visit the official XOSS webmísto.