Amewi Stingray Speedboat (Model 26108) Instruction Manual

1. Důležité bezpečnostní informace

Varování: This product is not suitable for children under 3 years due to small parts that could be swallowed, posing a choking hazard.

• Always operate the speedboat in open water areas, away from swimmers, animals, and other watercraft.
• Ensure the operating area is clear of obstacles such as weeds, rocks, or debris that could interfere with the jet drive.
• Neprovozujte loď ve slané vodě, mohlo by dojít k poškození vnitřních součástí.
• Keep fingers and loose clothing away from the jet drive intake and outlet during operation.
• Always remove the battery from the boat and the transmitter when not in use.
• Během provozu dohlížejte na děti.

2. Co je v krabici

Zkontrolujte prosím obsah vašeho balení podle níže uvedeného seznamu:

• Amewi Stingray Speedboat Model
• Dálkové ovládání 2.4GHz
• Li-ion 2S 7.4V 2000mAh 15C Battery
• USB nabíjecí kabel
• Nástroj
• Lodní stojan
• Návod k použití (tento dokument)

Požadované příslušenství (není součástí dodávky): 3 x 1.5V AA batteries for the remote control.

3. Průvodce nastavením

3.1. Nabíjení lodní baterie

The included Li-ion 2S 7.4V 2000mAh battery powers the speedboat.

1. Připojte lithium-iontovou baterii k nabíjecímu kabelu USB.
2. Zapojte nabíjecí kabel USB do vhodného zdroje napájení USB (např. port USB počítače, adaptér USB do zásuvky).
3. Indikátor nabíjení na kabelu USB bude zobrazovat stav nabíjení (viz chování indikátoru specifické pro nabíječku).
4. Charging typically takes 90-120 minutes. Do not overcharge the battery.
5. Po úplném nabití odpojte baterii od nabíječky.

Image: Internal components of the speedboat, including the battery and motor assembly.

3.2. Instalace baterií vysílače

The 2.4GHz remote control requires 3 x 1.5V AA batteries (not included).

1. Otevřete přihrádku na baterie na zadní straně dálkového ovladače.
2. Vložte 3 baterie AA, dbejte na správnou polaritu (+/-).
3. Bezpečně uzavřete přihrádku na baterie.

Image: The 2.4GHz remote control for the speedboat.

3.3. Preparing the Speedboat

1. Carefully remove the top hull cover(s) of the speedboat. The boat features a double hull cover for water protection.
2. Připojte plně nabitou lithium-iontovou baterii k napájecímu konektoru lodi.
3. Carefully place the battery inside the hull, ensuring wires are not pinched.
4. Securely reattach both hull covers to prevent water ingress. Ensure all latches or seals are properly engaged.

Obrázek: Nahoře view of the speedboat, showing the double hull cover design.

4. Návod k obsluze

4.1. Zapnutí a párování

1. Place the speedboat gently into the water. The boat's electronics will activate upon contact with water.
2. Turn on the remote control. The remote control and boat should automatically pair. A successful pairing is usually indicated by a solid light on both devices.
3. Pokud se párování nezdaří, vypněte obě zařízení a postup opakujte.

4.2. Základní ovládací prvky

• Spoušť plynu: Pull the trigger to move forward, push to reverse (if applicable). The jet drive provides strong acceleration.
• Volant: Turn the wheel left or right to steer the boat. The thrust vector control allows for high agility and maneuverability.
• Úpravy oříznutí: Use the trim buttons on the remote control to fine-tune steering and throttle for straight running.
• Rash Limitation (Dual Rate): Adjust the sensitivity of the steering and throttle for different driving styles or conditions.

Obrázek: Zadní view of the speedboat, highlighting the jet drive mechanism.

4.3. Pokročilé funkce

• Switchable LED Lighting: The boat features front and rear LED lighting, which can be switched on/off via the transmitter. This is useful for operation at dusk.
• Podpětítage Varování: The 2.4GHz transmitter system includes an undervoltage warning function to prevent the boat battery from being discharged too deeply. Pay attention to audible or visual warnings from the transmitter.
• Range Warning: The transmitter will alert you if the boat is approaching or exceeding its maximum operating range (60-80 meters). Bring the boat closer immediately if this warning activates.
• Funkce samovyrovnání: In case of a rollover, the boat is designed to self-right, allowing it to continue operation without manual intervention.

The Amewi Stingray Speedboat can reach speeds of up to 40 km/h and offers a driving time of up to 12 minutes on a full charge.

5. Údržba

• Po každém použití:
  • Remove the boat from the water and immediately disconnect the battery.
  • Open the hull covers and carefully drain any accumulated water. Wipe the interior dry with a soft cloth.
  • Inspect the jet drive intake for any debris (weeds, leaves, etc.) and remove them carefully.
  • Clean the exterior of the boat with a damp tkanina. Nepoužívejte agresivní chemikálie.
  • Ensure the water cooling system's inlet and outlet are clear.
• Péče o baterie:
  • Store Li-ion batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store batteries fully charged or fully discharged for extended periods. Aim for a storage charge of around 50%.
• Hull Seals: Regularly inspect the rubber seals around the hull covers for any signs of wear or damage. Damaged seals can lead to water ingress.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: Amewi