Joomer SSL0200-I-24V

Joomer 32FT White Christmas Icicle String Lights Instruction Manual

Model: SSL0200-I-24V

1. Bezpečnostní informace

Před instalací a použitím si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

  • Pouze pro venkovní použití: These icicle lights are designed for outdoor use. Ensure all connections are secure and protected from direct water exposure.
  • Hodnocení voděodolnosti: The icicle string lights are waterproof and snow resistant. However, the power adapter is ne waterproof. Keep the power adapter away from any source of water to prevent electrical hazards.
  • Zdroj napájení: Use only with the provided ETL certified adapter. Do not exceed the maximum wattage nebo svtage.
  • Limit připojení: Do not connect more than 3 sets of these icicle lights end-to-end. Exceeding this limit may overload the circuit and pose a fire risk.
  • Instalace: Do not secure wiring with staples or nails. Do not hang the string lights in a way that could cut or damage wire insulation.
  • Skladování: When not in use, store the lights in a cool, dry place, away from direct sunlight.

2. Obsah balení

  • 1 x Joomer 32FT White Christmas Icicle String Lights (50 drops)
  • 1 x ETL Certified Power Adapter

3. Specifikace

Číslo modeluSSL0200-I-24V
Délka osvětlení32 stop (9.8 metrů)
Délka přívodního kabelu9.8 stop (3 metrů)
Počet kapek50
Space Between Drops7.8 palců (20 cm)
Prostor mezi LED diodami3.9 palců (10 cm)
Drop Lengths15.7 inches / 23.6 inches / 15.7 inches / 23.6 inches (alternating)
Světlá barvaBílý
Zdroj napájeníElektrický kabel
svtage120V AC
Wattage7.2 wattů
MateriálPlast
Speciální funkceWaterproof (lights only, adapter not waterproof)

4. Nastavení a instalace

4.1 Vybalení a příprava

  1. Carefully remove the icicle lights from the packaging.
  2. Untangle the string lights gently. It is recommended to hold the bundle in one hand and let one end drop to the floor, then walk away to allow the lights to untangle naturally.
  3. Inspect the lights and power adapter for any signs of damage. Do not use if damaged.

4.2 kroky instalace

  1. Vyberte umístění: Select a suitable outdoor location for installation, such as eaves, roofs, or along fences. Ensure the power adapter can be placed in a dry, protected area, away from water.
  2. Montáž: Secure the main string of the icicle lights using appropriate outdoor clips or ties. Avoid using staples or nails that could damage the wiring. Ensure the drops hang freely.
  3. Připojte napájení: Plug the icicle lights into the ETL certified power adapter.
  4. Connect Multiple Sets (Optional): If connecting multiple sets, ensure the power is disconnected from all sets. Align the male and female connectors at the end of each string and push them together firmly. Twist the waterproof caps to secure the connection. Remember, you can connect up to a maximum of 3 sets.
Joomer 32FT White Christmas Icicle String Lights installed on a house

Image: Joomer 32FT White Christmas Icicle String Lights installed on a house, illuminating the eaves and porch area. The lights feature a bright white glow, creating a festive atmosphere.

Diagram showing dimensions and connectability of Joomer Icicle Lights

Image: A diagram illustrating the dimensions of the Joomer Icicle Lights, including the 32FT lighted length, 9.8FT lead cable, 7.8-inch spacing between drops, and alternating drop lengths of 15.7 and 23.6 inches. It also highlights the end-to-end connectability for up to 3 sets.

Close-up of end-to-end connectors for Joomer Icicle Lights

Obrázek: Detailní záběr view of the end-to-end connectors for the Joomer Icicle Lights, showing how multiple strands can be linked together. The image also displays the UL Listed plug, indicating safety compliance.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

Once properly installed and connected to a power source, the lights will turn on. To turn off, simply unplug the power adapter.

5.2 Změna režimů osvětlení

The icicle lights feature 8 different lighting modes. These modes are controlled by a button located on the power adapter.

  1. Press the button on the power adapter repeatedly to cycle through the 8 available modes.
  2. The built-in memory chip will save your last selected mode setting, so you do not need to reset it each day.

Dostupné režimy:

  • 1. Kombinace
  • 2. In Wave
  • 3. Sekvenční
  • 4. Slo-Glo
  • 5. Chasing/Blesk
  • 6. Pomalé blednutí
  • 7. Blikání/blikání
  • 8. Trvale svítí
Joomer Icicle Lights power adapter with mode button and timer indicator

Image: A close-up of the Joomer Icicle Lights power adapter, showing the button used to cycle through the 8 lighting modes and activate the timer function. The image also depicts various lighting modes in a decorative outdoor setting.

5.3 Funkce časovače

The lights include a convenient timer function:

  1. Chcete-li aktivovat časovač, dlouhý stisk the button on the power adapter for 3 seconds.
  2. The timer indicator light on the adapter will illuminate, confirming activation.
  3. Once activated, the lights will stay on for 6 hours and then automatically turn off for 18 hours, repeating this cycle daily.
  4. To deactivate the timer, long press the button again for 3 seconds until the timer indicator light turns off.

6. Údržba

6.1 Čištění

  • Before cleaning, ensure the lights are unplugged from the power source.
  • Wipe the lights gently with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.

6.2 Skladování

  • Before storing, ensure the lights are completely dry.
  • Carefully coil the string lights to prevent tangling.
  • Store the lights and adapter in their original packaging or a suitable container in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Řešení problémů

ProblémMožná příčinaŘešení
Světla se nerozsvítí.Žádné napájení, uvolněné připojení, poškozený adaptér.Ensure the adapter is securely plugged into a working outlet. Check all connections. Inspect the adapter and lights for visible damage.
Lights flicker or some LEDs are off.Loose connection, damaged LED, power fluctuation.Check all connections, especially if multiple sets are linked. While individual LEDs are not replaceable, the string is designed for durability. If flickering persists, try a different power outlet.
Funkce časovače nefunguje správně.Timer not activated or deactivated properly.Long press the button on the adapter for 3 seconds to activate/deactivate the timer. Ensure the timer indicator light reflects the desired state.
Lights are not waterproof.Power adapter exposed to water.The string lights are waterproof, but the adapter is not. Ensure the power adapter is always protected from rain, snow, and other water sources.

8. Záruka a podpora

8.1 Informace o záruce

This Joomer product comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a poruchy při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, nehodou, neoprávněnou úpravou nebo nesprávnou instalací.

8.2 Zákaznická podpora

For any questions, concerns, or warranty claims, please contact Joomer customer support through the retailer where the product was purchased or visit the official Joomer store online.

Joomer Store: Visit the Joomer Store on Amazon

© 2025 Joomer. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.