Zavedení
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your SHARP AY-S25V-W Air Conditioner. Please read this manual thoroughly before using the product and keep it for future reference.
Bezpečnostní informace
Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.
- Ensure the power supply matches the unit's requirements (100V-15A).
- Do not attempt to install or repair the unit yourself. Always consult qualified professionals for installation and servicing.
- Udržujte prostor kolem venkovní jednotky bez překážek.
- Nevkládejte prsty ani žádné předměty do vstupu/výstupu vzduchu.
- In case of abnormal operation, turn off the power immediately and contact customer support.
Konec produktuview
The SHARP AY-S25V-W is a V-series air conditioner designed for comfortable indoor climate control. It features both heating and cooling functions.

Figure 1: SHARP AY-S25V-W Indoor Unit. This image shows the front view of the white indoor air conditioner unit.
Klíčové vlastnosti:
- Heating and Cooling Functionality
- Suitable for approximately 8 tatami mats (10-17 m²)
- Napájení 100V
- Compact Indoor Unit Design
Instalace
Professional installation is highly recommended for this air conditioner. The following outlines the general flow and potential additional costs associated with the installation process.
Installation Flow:

Figure 2: Flow from Purchase to Installation. This diagram illustrates the six steps of the installation process: Order, Hearing Sheet Reply, Installation Date Arrangement, Product Receipt, Contact for Visit Time, and Visit/Installation.
- Step 1: Order Placement - Place your order via the webmísto.
- Step 2: Hearing Sheet Reply - A hearing sheet will be sent to your registered email address after your order. Please confirm and reply.
- Step 3: Installation Date Arrangement - Contact will be made via email to arrange and discuss the desired installation date.
- Step 4: Product Receipt - Produkt vám bude doručen před datem instalace.
- Step 5: Contact for Visit Time - Budete kontaktováni pro potvrzení času návštěvy a instalace.
- Step 6: Visit & Installation - The installation team will visit and complete the setup.
Standard Installation Scope:
Standard installation includes mounting the indoor and outdoor units, plastic blocks, and piping (up to 4m of piping work and tape wrapping finish). Hole drilling is free for one location in general wooden/mortar walls.
Note: Depending on your home's conditions, additional on-site charges may apply. Please confirm with the installer.
Examples of Additional Installation Costs:
Následující tabulky poskytují napřamples of potential additional costs for specific installation scenarios.
Outdoor Unit Installation Location:

Figure 3: Additional Costs for Outdoor Unit Installation. This image shows various outdoor unit placement scenarios (rooftop, wall-mounted, ground level, veranda, two-tier) and their associated new installation and replacement costs.
| Typ instalace | New Installation (from) | Replacement (from) |
|---|---|---|
| Rooftop/Wall-mounted/Ceiling-hung | 14,300 XNUMX JPY | 7,700 XNUMX JPY |
| Přízemí | ¥0 (Standard) | ¥0 (Standard) |
| Veranda Placement | ¥0 (Standard) | ¥0 (Standard) |
| Two-tier Placement | 19,800 XNUMX JPY | 3,300 XNUMX JPY |
High-altitude work (e.g., piping from 2nd to 1st floor: ¥3,300; 3rd to 1st floor: ¥7,700) may incur additional charges.
Piping Cover Work:

Figure 4: Additional Costs for Piping Cover Work. This image details costs for new indoor/outdoor covers, reusing existing covers, additional straight covers, and ventilation head/corner parts.
| Položka | Cost (Tax Included) |
|---|---|
| New Indoor/Outdoor Cover (up to 2m straight, 1 bend) | 8,800 XNUMX JPY |
| Reuse Existing Outdoor Cover (up to 2m straight, 1 bend) | 2,200 XNUMX JPY |
| Reuse Existing Indoor Cover (up to 2m straight, 1 bend) | 4,400 XNUMX JPY |
| Additional Straight Cover (per 1m) | 3,300 XNUMX JPY |
| Ventilation Head / Corner Part | 2,200 XNUMX JPY |
Piping covers are available in 5 colors (Ivory, Brown, Gray, Black, White).
Power Supply Related Work:

Figure 5: Additional Costs for Power Supply Related Work. This image lists costs for dedicated electrical wiring, outlet replacement, outlet extension, voltage spínání a formovací práce.
| Položka | Cost (Tax Included) |
|---|---|
| Dedicated Electrical Wiring (up to 10m exposed, includes branch breaker/outlet) | 13,750 XNUMX JPY |
| Outlet Replacement (100V/200V) | 2,200 XNUMX JPY |
| Outlet Extension (up to 5m exposed wiring) | 3,300 XNUMX JPY |
| svtage Switching (if voltage differs, assembly work in distribution board for 100V/200V) | 2,750 XNUMX JPY |
| Molding Work (per 1m of power cord molding finish) | 550 XNUMX JPY |
Operace
This section provides general guidance on operating your SHARP AY-S25V-W air conditioner. For detailed instructions on specific modes and advanced features, please refer to the remote control manual that came with your unit.
Základní funkce:
- Zapnutí/vypnutí: Stisknutím tlačítka napájení na dálkovém ovladači jednotku zapnete nebo vypnete.
- Výběr režimu: Use the mode button to switch between Cooling, Heating, Dry, and Fan modes.
- Nastavení teploty: Pomocí šipek nahoru/dolů nastavte požadovanou teplotu.
- Rychlost ventilátoru: Adjust the fan speed to your preference (Auto, Low, Medium, High).
Režim chlazení:
Ideal for hot weather. Set the desired temperature, and the unit will cool the room to that setting. Recommended temperature range for cooling is typically 26-28°C (79-82°F).
Režim topení:
Ideal for cold weather. Set the desired temperature, and the unit will heat the room. Recommended temperature range for heating is typically 20-24°C (68-75°F).
Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vaší klimatizace. Před prováděním jakékoli údržby vždy odpojte napájení.
Čištění vzduchového filtru:
- Otevřete přední panel vnitřní jednotky.
- Vyjměte vzduchové filtry.
- Filtry vyčistěte vysavačem nebo je omyjte vlažnou vodou s jemným čisticím prostředkem.
- Před opětovným vložením filtrů nechte je zcela vyschnout.
- Zavřete přední panel.
Frequency: Clean air filters every two weeks or more often if the unit is used frequently or in dusty environments.
Čištění venkovní jednotky:
Periodically check the outdoor unit for any debris, leaves, or obstructions around the coils and fan. Gently remove any blockages. Do not spray water directly onto the electrical components.
Odstraňování problémů
Než kontaktujete zákaznickou podporu, zkontrolujte prosím následující běžné problémy:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka se nezapne | No power; remote control battery low | Check power plug/breaker; replace remote batteries |
| Nedostatečné chlazení/topení | Dirty air filters; blocked outdoor unit; wrong mode selected; room too large | Clean filters; clear obstructions; select correct mode; ensure unit matches room size |
| Neobvyklý hluk | Loose parts; foreign object in fan; refrigerant flow sound (normal) | Contact professional if persistent or loud; normal sounds are acceptable |
| Únik vody | Clogged drain hose; improper installation | Check drain hose for kinks/blockages; contact installer for inspection |
Pokud problém přetrvává i po vyzkoušení těchto řešení, obraťte se na kvalifikovaný servisní personál.
Specifikace
Detailed technical specifications for the SHARP AY-S25V-W Air Conditioner:
| Funkce | Detail |
|---|---|
| Použitelná velikost pokoje (目安) | Mainly 8 tatami mats |
| Topení | 6-8 tatami mats (10-13 m²) |
| Chladicí prostor | 7-10 tatami mats (11-17 m²) |
| Topný výkon | 2.8 kW (0.8-4.4 kW) |
| Low Temperature Heating Capacity (at 2°C outdoor temp) | 3.2 kW |
| Chladicí kapacita | 2.5 kW (0.8-3.2 kW) |
| Spotřeba energie na vytápění | 620 W (150-1330 W) |
| Spotřeba chladicí energie | 675 W (180-980 W) |
| Roční spotřeba energie | 815 kWh |
| Napájení | Single-phase 100V-15A |
| Typ zástrčky | Parallel type |
| Rozměry vnitřní jednotky (Š×V×H) | 798 × 249 × 301 mm |
| Rozměry venkovní jednotky (Š×V×H) | 670 (+57mm pipe cover) × 540 × 280 (incl. legs 326) mm |
| Hmotnost vnitřní jednotky | 11 kg |
| Hmotnost venkovní jednotky | 21 kg |
| Max. Délka potrubí | 15 m |
| Max. výškový rozdíl potrubí | 10 m |
Záruka a podpora
Your SHARP AY-S25V-W Air Conditioner comes with a comprehensive warranty and support.
Záruka instalace:

Figure 6: 3-Year Installation Warranty. This image highlights a 3-year warranty specifically for installation work.
A 3letá záruka na instalaci is included. If any operational defects occur due to installation issues within 3 years from the date of purchase, they will be covered under warranty. This warranty is provided by XPRICE, the installation cooperation company.
Note: This product is a genuine SHARP product, despite being listed as "No Brand Product" on some product pages due to specification display.
Zákaznická podpora:
For any inquiries regarding product operation, maintenance, or warranty claims, please contact the seller or the authorized service center. Refer to your purchase documentation for specific contact details.
Some remote islands and areas may not be serviceable. Please confirm service availability for your region.