BOTSLAB G980H Hardwire Kit Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation and operation of the BOTSLAB G980H Hardwire Kit. This kit is specifically designed to provide continuous power to your BOTSLAB G300H dashcam, enabling its 24-hour parking monitoring feature and protecting your vehicle's battery from discharge.

2. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Sada pevných vodičů x 1
• Uživatelská příručka x 1

Obrázek 2.1: Obsah balení

3. Vlastnosti produktu

• Secure Parking Protection: Enables up to 24-hour monitoring for your dashcam, utilizing time-lapse recording or collision-triggered normal recording when the vehicle is parked. This ensures continuous surveillance and protection.
• Designed for BOTSLAB G300H Dashcam: Specifically engineered for seamless compatibility with the BOTSLAB G300H dashcam, featuring a Micro-USB port. The 9-foot cable length allows for flexible installation in most vehicle types.
• Battery Drain Prevention: Incorporates under-voltage protection to prevent your vehicle's battery from draining. It supports an input voltage range of DC12V-30V and provides a stable output of 5V/2.4A. Constructed with high-quality materials for reliable performance in various environmental conditions.
• Snadná instalace: Designed for a straightforward, three-step installation process: power source testing, wire setup, and dashcam connection. A detailed guide is provided to facilitate a hassle-free setup.
• Bezpečnostní normy: Manufactured to meet relevant safety standards and certifications, ensuring the hardwire kit is both safe and effective for use.

4. Bezpečnostní informace

Please read and understand all safety instructions before installation and use. Improper installation can lead to vehicle damage or personal injury.

• Před zahájením instalace se ujistěte, že je vypnuté zapalování vozidla a odpojená baterie, abyste předešli elektrickému zkratu.
• The hardwire kit is designed for DC12V-30V input. Do not connect to other voltage zdroje.
• The kit includes under-voltage protection to prevent battery drain. However, prolonged parking monitoring in extremely cold conditions or with an old battery may still affect battery performance.
• If you are unsure about any part of the installation process, consult a professional auto electrician.

Figure 4.1: Battery Drain Prevention Overview

5. Instalační příručka

Follow these steps for a proper installation of your BOTSLAB G980H Hardwire Kit:

5.1 Identifikace součástí

Figure 5.1: Hardwire Kit Component Overview

• Micro USB port: Connects to your BOTSLAB G300H dashcam.
• Power Conversion Box: Regulates voltage from the car battery to the dashcam.
• Žlutý vodič (ACC): Connects to a fuse that is only powered when the ignition is on (Accessory power).
• Red Wire (VCC+): Connects to a fuse that has constant power (Battery power), even when the ignition is off.
• Black Wire (GND-): Connects to a metal bolt or screw on the vehicle's chassis for grounding.

5.2 kroky instalace

1. Test Power Sources:

   Locate your vehicle's fuse box. Using a circuit tester, identify a fuse that provides constant power (12V when the car is off) for the Red Wire (VCC+) and a fuse that provides accessory power (12V only when the ignition is on) for the Yellow Wire (ACC). Also, identify a suitable grounding point (a metal bolt or screw on the car's chassis) for the Black Wire (GND-).
2. Set Up the Wires:

   Připojte Red Wire (VCC+) to the constant power fuse using a fuse tap (not included). Connect the Yellow Wire (ACC) to the accessory power fuse using another fuse tap. Securely attach the Black Wire (GND-) to the chosen grounding point. Route the wires neatly along the vehicle's interior trim to conceal them and prevent interference with driving controls.

3. Connect the Dashcam:

   Plug the Micro-USB connector from the hardwire kit into the Micro-USB port on your BOTSLAB G300H dashcam. Ensure the connection is secure. Turn on your vehicle's ignition to verify that the dashcam powers on correctly and the parking monitor feature is enabled.

6. Návod k obsluze

6.1 24hodinový parkovací monitor

Once the BOTSLAB G980H Hardwire Kit is correctly installed, your BOTSLAB G300H dashcam will automatically activate its 24-hour parking monitoring feature when the vehicle's ignition is turned off.

• Časosběrné nahrávání: The dashcam will record continuously in time-lapse mode, capturing extended periods of activity in a compressed format.
• Collision-Triggered Recording: If the vehicle experiences an impact or collision while parked, the dashcam will automatically switch to normal recording mode to capture the event in detail.
• Nízký objemtage ochrana: The hardwire kit monitors your vehicle's battery voltagE. Pokud zvtage drops below a safe threshold, the kit will automatically cut power to the dashcam to prevent complete battery discharge, ensuring your vehicle can still start.

Obrázek 6.1: Funkce monitorování parkování

7. Údržba

The BOTSLAB G980H Hardwire Kit requires minimal maintenance. Periodically check the connections to ensure they remain secure. Ensure the cable routing does not interfere with vehicle operations or become damaged by moving parts.

8. Řešení problémů

• Autokamera se po instalaci nezapne:
  • Check all wire connections (Red, Yellow, Black) to ensure they are secure and correctly connected to their respective power sources and ground.
  • Verify that the fuse taps are properly installed and the fuses are not blown.
  • Ensure the Micro-USB connector is fully inserted into the dashcam.
• Parking Monitor feature is not active:
  • Potvrďte, že Red Wire (VCC+) is connected to a constant power source and the Yellow Wire (ACC) is connected to an accessory power source. If the ACC wire is connected to a constant power source, the dashcam may not detect the ignition being off.
  • Check your dashcam's settings to ensure the parking monitor feature is enabled.
• Vehicle battery drains quickly:
  • While the kit has low voltage protection, prolonged use of parking mode on an older or weak battery can still lead to discharge. Consider reducing parking monitor duration if your dashcam allows, or check your vehicle's battery health.
  • Zajistěte nízký objemtage cut-off setting on your dashcam (if applicable) is set appropriately.

9. Specifikace

10. Záruka a podpora

For warranty information and technical support, please contact BOTSLAB customer service. Refer to the contact details provided in the original product packaging or visit the official BOTSLAB webmísto.

E-mail: service@botslab.com