JINJUNYE Countertop Ice Maker User Manual

1. Důležité bezpečnostní pokyny

Please read all instructions carefully before using your JINJUNYE Ice Maker. Keep this manual for future reference.

• Elektrická bezpečnost: Ensure the ice maker is connected to a grounded power outlet. Do not use if the power cord is damaged.
• Upozornění na chladivo: This appliance contains flammable refrigerant. Do not puncture the refrigerant tubing. Do not use mechanical devices or other means to defrost the ice maker.
• Umístění: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
• Počáteční nastavení: After receiving the ice maker, allow it to stand upright for at least 24 hours before plugging it in and operating. This allows the refrigerant to settle.
• Kvalita vody: Use only potable drinking water.
• Čištění: Před čištěním spotřebič vždy odpojte.
• Děti: Během provozu držte děti mimo dosah výrobníku ledu.

2. Konec produktuview

The JINJUNYE Countertop Ice Maker is designed for convenience and efficiency, producing bullet-shaped ice cubes quickly.

Klíčové komponenty:

• Ovládací panel: Features indicator lights for "Add Water", "Ice Full", "Power", and buttons for "On/Off" and "Select" ice size (S/L).
• Koš na led: Removable basket for collecting and storing ice cubes.
• Naběračka ledu: Included for easy ice retrieval.
• Vodní nádrž: Located beneath the ice basket, with a maximum fill line.
• Vypouštěcí zátka: Located at the bottom for draining water during cleaning.

Vlastnosti:

• Rychlá výroba ledu: Produces 9 bullet-shaped ice cubes in approximately 6 minutes. Max production up to 35 pounds per day.
• Dvě velikosti ledu: Choose between small (S) and large (L) bullet ice cubes.
• Funkce samočištění: Simplifies maintenance with an automated cleaning cycle.
• Inteligentní snímače: Automatically stops ice production when the ice basket is full or when the water level is low, indicated by corresponding lights.
• Přenosný design: Compact dimensions (8.7"W x 11.34"D x 11.42"H) make it suitable for various locations.
• Provoz s nízkou hlučností: Designed to operate quietly.

Figure 2.1: Control Panel and Indicator Lights.

Figure 2.2: Two Available Ice Cube Sizes.

3. Nastavení

1. Rozbalit: Opatrně vyjměte výrobník ledu z obalu.
2. Doba odpočinku: Place the unit upright on a flat, stable surface. Allow it to rest for at least 24 hours before plugging it in. This is crucial for the compressor's longevity.
3. Čistý: Před prvním použitím očistěte vnitřek výrobníku ledu a košík na led měkkým hadříkem a jemným čisticím prostředkem. Důkladně opláchněte.
4. Přidat vodu: Open the lid and remove the ice basket. Fill the water reservoir with potable drinking water up to the "MAX" fill line. Do not overfill.
5. Vyměnit košík: Place the ice basket back into the unit.
6. Připojit: Připojte napájecí kabel do uzemněné elektrické zásuvky.

Figure 3.1: Initial Setup Steps.

4. Návod k obsluze

Výroba ledu:

1. Ensure the unit is set up as per Section 3.
2. Press the "ON/OFF" button to turn on the ice maker. The "Power" indicator light will illuminate.
3. Press the "SELECT" button to choose your desired ice cube size: "S" for small or "L" for large. The corresponding indicator light will illuminate.
4. The ice maker will begin the ice-making cycle. The first batch may take slightly longer.
5. When the ice basket is full, the "ICE FULL" indicator light will turn on, and the machine will automatically pause. Remove ice to resume production.
6. If the "ADD WATER" indicator light illuminates, the water reservoir is low. Add more water to continue ice production.

Figure 4.1: Control Panel in Operation.

5. Údržba

Funkce samočištění:

1. Ujistěte se, že výrobník ledu je prázdný a neobsahuje vodu.
2. Add clean water to the reservoir up to the "MAX" fill line.
3. Long press the "ON/OFF" button for 5 seconds to activate the self-cleaning mode. The "S" and "L" indicator lights will blink consecutively.
4. The self-cleaning cycle typically lasts for 15 minutes.
5. Once the cycle is complete, drain the water by removing the drain plug located at the bottom of the unit.
6. It is recommended to perform the self-cleaning function once a month, especially in hard water areas.

Generální úklid:

• Pravidelně otírejte vnější povrch měkkým hadříkemamp tkanina.
• Clean the interior components, including the ice basket and water reservoir, with a mild detergent and warm water. Rinse thoroughly to remove any soap residue.
• Ensure all parts are dry before reassembling and operating the unit.

Figure 5.1: Self-Cleaning Function Steps.

Figure 5.2: Hard Water Impact on Ice Maker (Descaling Recommendations).

6. Řešení problémů

7. Specifikace

• Značka: JINJUNYE
• Model: B0D3PYN3L3
• Kapacita výroby ledu: Up to 35 lbs/day
• Ice Cube Production Time: 9 kostek za 6 minut
• Kapacita ledu: 2.3 liber
• Kapacita vodní nádrže: 1.5 l
• Tvar kostky ledu: Kulka
• Rozměry kostek ledu: Malá (S), Velká (L)
• Rozměry (Š*H*V): 8.7 cm x 11.34 cm x 11.42 cm
• Vlastnosti: Self-cleaning, Intelligent Infrared Sensors, Low Noise

8. Záruka a podpora

JINJUNYE products are manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your ice maker, please refer to the contact information provided on the product packaging or visit the official JINJUNYE webmísto.

Always ensure you have your model number (B0D3PYN3L3) and purchase date available when contacting support.