BDJSN 1500W Bubble Fog Machine User Manual

1. Úvod

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your BDJSN 1500W Bubble Fog Machine. This versatile machine combines fog, bubbles, and color-changing LED lights to enhance various events and performances. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: The BDJSN 1500W Bubble Fog Machine is suitable for a variety of applications, including DJ clubs, weddings, dance events, stage performances, parties, and Halloween celebrations.

2. Důležité bezpečnostní pokyny

• Vždy připojujte stroj k uzemněné elektrické zásuvce.
• Nepoužívejte stroj, pokud je napájecí kabel poškozený.
• Ujistěte se, že je stroj umístěn na stabilním a rovném povrchu, aby se zabránilo převrácení.
• Keep the machine away from flammable materials, heat sources, and water.
• Use only manufacturer-recommended bubble and fog fluid. Using other fluids may damage the machine or create health hazards.
• Do not touch the nozzle during operation or immediately after use, as it may be hot.
• Během provozu zajistěte dostatečné větrání v okolí stroje.
• Do not obstruct the fan or ventilation openings.
• Uchovávejte mimo dosah dětí a neoprávněných osob.
• Před čištěním nebo servisem odpojte od napájení.

3. Obsah balení

Po vybalení ověřte, zda jsou všechny položky přítomny a v dobrém stavu:

• BDJSN 1500W Bubble Fog Machine
• Napájecí kabel
• Dálkové ovládání
• Uživatelská příručka

4. Specifikace

Figure 2: Physical dimensions of the BDJSN 1500W Bubble Fog Machine.

5. Vlastnosti produktu

The BDJSN 1500W Bubble Fog Machine incorporates several design elements for enhanced performance and user convenience:

Figure 3: The machine features 18 LED lamp beads for colorful effects and a super cooling fan to protect internal components.

Figure 4: Ergonomic handles provide easy portability, and a pot wheel fan ensures efficient heat dissipation.

6. Nastavení

6.1 Vybalení a kontrola

Carefully remove the machine from its packaging. Inspect for any signs of damage during transit. If damage is found, do not operate the machine and contact your retailer.

6.2 Umístění

Place the machine on a flat, stable, and non-combustible surface. Ensure there is sufficient space around the unit for proper ventilation (at least 20 cm on all sides). Keep the output nozzle clear of obstructions and direct the output away from people and sensitive equipment.

6.3 Plnění kapalinou

1. Locate the fluid reservoir cap on the machine.
2. Unscrew the cap and carefully pour the appropriate bubble fog fluid into the reservoir. Do not overfill.
3. Securely replace the reservoir cap to prevent spills.
4. Poznámka: Use only high-quality, water-based bubble fog fluid specifically designed for combined bubble and fog machines. Using incorrect fluid can cause damage or poor performance.

6.4 Připojení napájení

Connect the provided power cable to the machine's power inlet and then to a grounded AC110/240V 50-60HZ power outlet. Ensure the power switch on the machine is in the OFF position before connecting.

7. Provoz

Figure 5: The machine in operation, generating both smoke and bubbles.

7.1 Zapnutí a zahřátí

1. Ensure the fluid reservoir is adequately filled.
2. Flip the power switch to the ON position. The machine will begin its warm-up cycle.
3. The LCD control panel will display the warm-up status. The machine typically takes approximately 5 minutes to reach operating temperature.
4. Once warmed up, the machine is ready for use.

7.2 Metody řízení

The BDJSN 1500W Bubble Fog Machine offers three control options:

• Ovládací panel LCD: Use the buttons on the integrated LCD panel to navigate menus, adjust settings, and manually trigger effects. Refer to the on-screen prompts for specific functions.
• Dálkové ovládání: The included wireless remote control allows for convenient activation of fog, bubbles, and LED effects from a distance. Follow the instructions provided with the remote for pairing and operation.
• Ovládání DMX512: For professional setups, connect the machine to a DMX512 controller using a standard DMX cable. Consult the DMX channel chart (usually found in a separate DMX guide or on the product's official website) to program and control the machine's various functions, including fog output, bubble generation, and LED color/mode.

7.3 Activating Effects

Once warmed up, use your chosen control method to activate the desired effects. The machine can produce continuous bubbles and smoke, with LED lights providing color-changing effects. Adjust the output intensity and LED modes as needed for your event.

8. Údržba

8.1 Čištění

• Po každém použití: Drain any remaining fluid from the reservoir. Run a small amount of distilled water through the machine for a few minutes to flush the internal pump and heater. This helps prevent clogs.
• Vnější: Otřete vnější část stroje měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Tryska: Ensure the output nozzle is clear of any residue. Use a small brush if necessary.

8.2 Fluid Type

Always use high-quality, water-based bubble fog fluid. Using oil-based fluids or other unauthorized liquids will damage the machine and void the warranty.

8.3 Skladování

Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir is empty and clean before long-term storage.

9. Řešení problémů

10. Záruka a podpora

Informace o záruce, technickou podporu nebo servisní dotazy naleznete v záruční kartě dodané s vaším produktem nebo se obraťte přímo na výrobce prostřednictvím jeho oficiálního website or customer service channels. Do not attempt to repair the machine yourself, as this may void your warranty and pose safety risks.