FM225 Facial Recognition Module User Manual

1. Úvod

The JMT FM225 Facial Recognition Module is an advanced 3D facial recognition camera designed for intelligent offline applications. Utilizing deep learning infrared facial recognition algorithms, this module provides highly accurate and reliable live detection capabilities, making it suitable for integration into smart homes, security monitoring systems, smart door locks, mobile vending machines, and various other fields requiring robust biometric authentication.

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your FM225 module.

2. Bezpečnostní informace

• Ensure the power supply meets the specified requirements (DC5.5V~9V@1A) to prevent damage to the module.
• Do not expose the module to extreme temperatures outside the working range (-20°C to +60°C) or storage range (-30°C to +70°C).
• Avoid environments with high humidity (above 93% without condensation) to prevent electrical short circuits.
• Handle the module with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the module, as this will void the warranty and may cause malfunction.
• Udržujte modul mimo dosah vody a jiných kapalin.

3. Package Contents (Kit A)

Po otevření balení ověřte, zda jsou přítomny všechny následující komponenty:

Image: Contents of the FM225 Facial Recognition Module Kit A, including the module, a USB cable, and a set of connection wires.

• 1x FM225 Facial Recognition Module
• 1x USB Communication Cable
• 1x Set of Connection Wires (for UART/power)

4. Konec produktuview

The FM225 module is a compact and powerful facial recognition solution. It features dual infrared cameras for 3D depth sensing and a central infrared illuminator for reliable performance in various lighting conditions. The module supports both UART and USB communication interfaces for flexible integration.

Obrázek: Detailní pohled shora dolů view of the FM225 module, highlighting the two camera lenses and the central infrared illuminator.

Klíčové vlastnosti:

• Deep Learning Infrared Facial Recognition: Advanced algorithms for high accuracy.
• Živá detekce: Prevents spoofing attempts.
• Provoz offline: Capable of performing recognition without an internet connection.
• Vysoká přesnost rozpoznávání: 98.85% accuracy rate.
• Large Face Capacity: Stores up to 100 facial features.
• Flexibilní komunikace: UART and USB interfaces.

5. Nastavení

This section details the physical connection and initial setup of the FM225 module.

5.1 Schéma zapojení pinů

Refer to the diagram below for the pin assignments for both UART and USB interfaces.

Image: Schematic diagram illustrating the UART (1-4) and USB (1-5) pin connections on the FM225 module's circuit board.

5.2 Připojení modulu

1. Připojení napájení: Connect the module to a stable DC power supply within the range of 5.5V to 9V at 1A. Ensure correct polarity.
2. Komunikační rozhraní:
   • UART: Use the provided connection wires to interface with your host system via UART. Refer to the pinout diagram for TX/RX and GND connections.
   • USB: Connect the module to your host system using the provided USB cable. This interface is typically used for data transfer and configuration.
3. Montáž: Securely mount the module in its intended location, ensuring the camera lenses have a clear, unobstructed view of the area where facial recognition will occur. Consider the optimal recognition distance (0.3m to 1.1m) and height (1.35m to 2.20m).

6. Návod k obsluze

The FM225 module operates primarily through commands sent via its communication interfaces. Specific software or SDKs provided by the manufacturer are typically required for full functionality, including face enrollment and recognition.

6.1 Face Enrollment

To enroll a new face into the module's memory:

1. Ensure the module is powered on and connected to your host system.
2. Use the manufacturer's provided software or send the appropriate UART/USB commands to initiate the enrollment process.
3. Position the subject's face within the recognition distance (0.3m to 1.1m) and within the recognition angle (supports multi-angle input).
4. Follow the on-screen prompts or command responses to complete the enrollment. The module can store up to 100 facial features.

6.2 Rozpoznávání obličeje

Once faces are enrolled, the module can perform recognition:

1. The module continuously scans for faces within its field of view.
2. When a face is detected, the module compares it against its stored facial features.
3. If a match is found with sufficient accuracy (98.85%), the module will output a recognition result via the chosen communication interface.
4. The module's live detection feature helps prevent recognition from photos or videos.

7. Údržba

The FM225 module requires minimal maintenance to ensure optimal performance.

• Čištění: Gently wipe the camera lenses with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Prostředí: Zajistěte, aby provozní prostředí zůstalo v rámci specifikovaného rozsahu teploty a vlhkosti.
• Aktualizace firmwaru: Pravidelně kontrolujte informace od výrobce webna webu, kde najdete dostupné aktualizace firmwaru pro zlepšení výkonu nebo přidání nových funkcí.

8. Řešení problémů

This section addresses common issues you might encounter with the FM225 module.

9. Specifikace

Detailed technical specifications for the FM225 Facial Recognition Module:

10. Záruka a podpora

For warranty information, technical support, or further inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: HI-LINK

Brand: JMT

For the latest documentation and software, please visit the official JMT store or HI-LINK support page.