tectake Arges Ergonomic Office Chair with Lumbar Support (Model 405323)

Zavedení

Thank you for choosing the tectake Arges Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

The tectake Arges office chair is designed to provide optimal seating comfort and support, helping to alleviate back issues during long periods of sitting. Its features include a height and angle-adjustable headrest, comfortable reclinable armrests, continuous height adjustment, breathable mesh fabric, and a height-adjustable lumbar support with adjustable tilt resistance.

Bezpečnostní pokyny

• Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou poškozené.
• Židli sestavte na měkkém a čistém povrchu, abyste zabránili poškrábání.
• Nestůjte na židli.
• Nepoužívejte židli jako schůdky.
• Během montáže držte děti v dostatečné vzdálenosti od židle. Malé části mohou představovat nebezpečí udušení.
• The maximum load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
• Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Avoid exposing the chair to direct sunlight or extreme temperatures for prolonged periods.

Nastavení a montáž

Follow these steps to assemble your tectake Arges office chair. It is recommended to have two people for assembly.

1. Rozbalte komponenty: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the included parts list (refer to your product packaging for the complete list).
2. Připevnění koleček k základně: Vložte pět koleček do otvorů na konci každé nohy základny židle. Pevně ​​zatlačte, dokud nezacvaknou na místo.
3. Vložte plynový zvedák: Vložte plynový zvedací válec do středového otvoru základny židle.
4. Sestavení sedáku a opěradla: Attach the backrest to the seat using the provided screws and tools. Ensure the orientation is correct.
5. Připevněte područky: Secure the armrests to the seat and backrest assembly using the designated screws.
6. Mount Mechanism: Attach the control mechanism to the underside of the seat using the appropriate screws. Ensure the lever is facing the front or right side for easy access.
7. Připojení sedadla k plynovému zvedáku: Opatrně umístěte sestavené sedadlo na plynový zvedací válec a ujistěte se, že je vystředěné a stabilní.
8. Připevnění opěrky hlavy: Slide the headrest into the designated slots at the top of the backrest and secure it.

After assembly, sit on the chair to ensure all components are securely connected and stable.

Návod k obsluze a nastavení

Your tectake Arges office chair offers several adjustment options to customize your seating experience for optimal comfort and ergonomic support.

Nastavení výšky židle

To adjust the seat height (approx. 45-55 cm):

• Chcete-li zvýšit: Lift the lever located under the seat on the right side while taking your weight off the seat. The seat will rise automatically.
• Chcete-li snížit: Lift the lever while seated. The seat will lower under your weight. Release the lever at the desired height.

Backrest Tilt Function

The chair features a tilt function with adjustable resistance.

• To activate/deactivate tilt: Pull out or push in the lever located under the seat (often the same lever as height adjustment, or a separate one).
• To adjust tilt resistance: Turn the round knob located under the front of the seat. Turn clockwise to increase resistance (making it harder to tilt) and counter-clockwise to decrease resistance (making it easier to tilt).

Nastavitelná bederní opěrka

The lumbar support is height-adjustable to provide targeted support for your lower back.

• Grasp the lumbar support pad on the backrest and slide it up or down to your preferred position.

Image: Close-up of the adjustable lumbar support mechanism on the chair's backrest.

Nastavitelná opěrka hlavy

The headrest can be adjusted in both height and angle.

• Nastavení výšky: Gently pull the headrest up or push it down to adjust its height.
• Nastavení úhlu: Tilt the headrest forward or backward to find the most comfortable angle for your neck and head.

Image: Close-up of the adjustable headrest, showing its height and angle adjustment capabilities.

Reclinable Armrests

The armrests can be tilted backward to allow the chair to be pushed closer to a desk or for easier movement.

• Simply lift the armrests upwards to recline them. Push them back down to their original position.

Údržba a péče

Proper maintenance will extend the life of your tectake office chair.

• Čištění: Vyčistěte židli pomocí inzerátuamp cloth. For stubborn stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
• Péče o tkaniny: The breathable mesh fabric and padded seat can be gently wiped. Do not saturate with water.
• Péče o rám: Wipe metal and plastic parts with a damp tkanina.
• Údržba koleček: Periodically check casters for hair or debris and clean them to ensure smooth movement.
• Kontrola upevňovacích prvků: Regularly inspect all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
• Skladování: If storing the chair for an extended period, keep it in a cool, dry place away from direct sunlight.

Odstraňování problémů

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact tectake customer support for assistance.

Specifikace

Image: Detailed dimensions of the tectake Arges office chair.

Záruka a podpora

For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service directly. Contact details can typically be found on the manufacturer's webwebu nebo na vašem nákupním dokladu.

Výrobce: tectake

prodejce: tectake Nizozemsko

Zásady vrácení: 30 dní