1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Waterdrop TST-UF-B 3-Stage Stainless Steel Under Sink Water Filter System. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Důležitá poznámka: This system is designed for municipal tap water and cold water sources only. It does not reduce Total Dissolved Solids (TDS) and is not suitable for well water or hot water. The system retains beneficial minerals such as potassium, calcium, sodium, and magnesium.
Klíčové vlastnosti:
- Pokročilé 3-Stage Filtrace: Features 6 layers of filter materials, including a 0.01 micron ultrafiltration membrane, to reduce impurities like chlorine, heavy metals, and odors.
- Efficient Filtration & Improved Taste: Provides water with a taste superior to bottled water, ideal for drinking and cooking.
- Fast and Stable Water Flow: Delivers up to 1.59 GPM, filling an 8-ounce cup in approximately 2.3 seconds.
- Odolná konstrukce: Crafted from lead-free 304 stainless steel for longevity and leak prevention.
- Dedicated Faucet: Includes a lead-free brushed stainless steel faucet for purified water, allowing separate use from your main tap.
- Ekologické: Long-lasting filters reduce plastic waste.

Obrázek 1: 6-Stage Advanced Filtration Process

Figure 2: 0.01 µm Ultrafiltration Mechanism

Figure 3: Quality Assurance and Certifications

Figure 4: Food-Grade 304 Stainless Steel Construction
2. Specifikace produktu
| Značka | Vodní kapka |
| Název modelu | TST-UF-B |
| Rozměry produktu | 12.99 cm D x 4.92 cm Š x 14.49 cm V |
| Materiál | Nerez |
| Kapacita | 8000 galonů |
| Typ instalace | Can be hung on the cabinet wall or placed on the floor |
| Metoda čištění | 0.01 µm Ultra-Filtration (reduces bacteria larger than 0.01 µm) |
| Maximální průtok | 1.59 galonu za minutu |
| Hodnocení vyšší teploty | 100 stupňů Celsia |
| Maximální podporovaná hladina TDS vody (PPM) | 300 |
3. Co je v krabici
- Systém vodního filtru pod dřezem
- Inlet & Outlet Hoses
- 3/8"–1/2" Converter Set
- Teflonová páska
- Vyhrazený faucet
4. Nastavení a instalace
Follow these steps to install your Waterdrop TST-UF-B water filter system. For a visual guide, please refer to the installation video below.
Opatření pro instalaci:
- Používejte rukavice na ochranu rukou.
- Only use with cold, clean water.
- Do not use in freezing weather; empty the housing to prevent damage.
- Keep small parts out of reach of young children.
- Follow local rules for installation.
- Always turn off the water before changing the filter.
Video 1: Installation Instructions for Under Sink Ultrafiltration System. This video provides a step-by-step visual guide for setting up your water filter system.
Kroky instalace:
- Install the Feed Water Adapter (3/8" or 1/2") (cold water only):
- Shut off the water supply. Turn on the kitchen faucet to release water pressure.
- Odpojte potrubí studené vody od ventilu přívodu studené vody.
- If water tubing and feed water adapter are separate, connect the adapter to the inlet tubing before installation.
- Twist the feed water adapter onto the cold water supply valve (with its washer) and tighten with an adjustable wrench.
- Trubku studené vody (s podložkou) natočte na adaptér napájecí vody a utáhněte nastavitelným klíčem.
- Nainstalujte kohoutek:
- Vložte hubici baterie do těla baterie.
- Insert the faucet stem into the hole on the countertop. (NOTE: If no hole exists, drill a 1" hole or use the soap dispenser hole).
- Under the sink, slip on other parts in the order shown in the picture (refer to video for visual).
- Insert the quick-connect fitting onto the faucet stem fully and firmly, then put on the blue lock clip.
- Připojit hadičky:
- Connect the inlet water tubing from the feed water adapter to the inlet water port of the filter system and pop the lock clip on the fitting.
- Connect the outlet water tubing from the faucet to the outlet water port of the filter system and pop the lock clip on the fitting.
- Fix the System:
- Option 1: Stand Alone: The system can stand directly inside the sink cabinet.
- Option 2: Wall Mount: Drill two holes on the cabinet wall, insert two screws into the holes, and hang the filter onto the screws. Place supports under the base of each housing to carry the water weight and protect the threads from weakening over time.

Figure 5: Easy Installation Diagram

Figure 6: Multiple Placement Options


