Zavedení
Thank you for choosing the NAOEVO 12-inch and 4-inch LED Light Bar Combo. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED light bars. Please read these instructions thoroughly before installation and keep this manual for future reference.
Bezpečnostní informace
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu a vašeho vozidla:
- Ensure the vehicle's power is disconnected before beginning any electrical installation.
- Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
- Produkt žádným způsobem neupravujte. Neoprávněné úpravy mohou vést ke ztrátě záruky a ohrožení bezpečnosti.
- Ujistěte se, že všechna kabelová spojení jsou bezpečná a řádně izolovaná, aby se zabránilo zkratu.
- Mount the light bars securely to prevent them from becoming loose during vehicle operation.
- Check local regulations regarding auxiliary lighting before installation and use.
Obsah balení
Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:
12-inch LED Light Bar Package:
1 Pair 12-inch LED Light Bar
1 Set 10ft Wiring Harness
1 Set Installation Accessories
4-inch LED Light Pods Package:
4 Pcs 4-inch LED Light Pod
1 Set Installation Accessories
Wiring Harness Details:
Toggle Design Switch
2-Wires Design
Fuses & Male Connectors Provided
Vlastnosti produktu
- Spot & Flood Combo Beam: The LED light bars feature a 15° spotlight reflector for focused, long-distance illumination and a 120° flood beam for wider area coverage. This combination provides comprehensive lighting for various driving conditions.
- Výstup s vysokým jasem: Equipped with high-intensity SMD3030 LED chips, these lights provide bright 6500K white light with high light transmittance, enhancing visibility and safety during night driving.
- Odolná konstrukce: The light bar kit features a die-cast aluminum housing and advanced sealing technology, achieving an IP68 waterproof rating. A sturdy PC lens panel resists harsh weather, and cooling fans on the back efficiently dissipate heat, extending the LED lifespan up to 50,000 hours.
- Nastavitelné montážní konzoly: The included 45° adjustable brackets allow for easy repositioning to change the beam direction as needed.
Image: Spot and Flood Combo Beam Design
Image: High Brightness Performance
Image: High Performance Components
Specifikace
| Atribut | Hodnota |
|---|---|
| Značka | NAOEVO |
| Model | B0D2R7NL1H |
| Materiál | Hliník, Polykarbonát (PC) |
| Typ světelného zdroje | Světelná dioda |
| Hodnocení voděodolnosti | IP68 |
| Životnost | Až 50,000 hodin |
| Beam Angle (Spot) | 15° |
| Beam Angle (Flood) | 120° |
Instalace (Nastavení)
Follow these steps for proper installation of your LED light bars:
- Vyberte místo montáže: Select a suitable location on your vehicle for the light bars, ensuring they do not obstruct vision or vehicle functions.
- Namontujte držáky: Attach the adjustable mounting brackets to the light bars using the provided hardware.
- Bezpečné světelné pruhy: Securely fasten the light bars to your chosen location on the vehicle. Adjust the angle of the light bars using the 45° adjustable brackets to achieve the desired beam direction.
- Připojení kabeláže: Connect the wiring harness to your vehicle's electrical system. The provided harness is designed for a 'plug and play' setup.
- Connect the positive (+) wire from the harness to a fused 12V power source.
- Connect the negative (-) wire from the harness to a suitable ground point on the vehicle chassis.
- Connect the light bar connectors to the corresponding connectors on the wiring harness.
- Test funkčnosti: Once all connections are made, reconnect the vehicle's power and test the light bars using the toggle switch on the harness.
Image: Easy Installation and Bracket Adjustment
Image: Plug and Play Wiring Diagram
Operace
To operate your NAOEVO LED light bars, simply use the toggle switch integrated into the wiring harness. Flip the switch to the 'ON' position to illuminate the lights and to the 'OFF' position to turn them off.
Údržba
Regular maintenance will ensure the longevity and optimal performance of your LED light bars:
- Čištění: Clean the lens and housing periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the lens.
- Inspekce: Regularly check all mounting hardware and electrical connections for tightness and corrosion. Tighten any loose fasteners and clean any corroded terminals.
- Kontrola poškození: Inspect the light bars for any physical damage, such as cracks in the lens or housing, which could compromise their waterproof integrity.
Odstraňování problémů
If you encounter issues with your LED light bars, refer to the following common troubleshooting steps:
- Světla se nerozsvítí:
- Check all electrical connections for proper contact and tightness.
- Verify that the wiring harness fuse is intact. Replace if blown.
- Ensure the vehicle's power source is active.
- Tlumená nebo blikající světla:
- Zkontrolujte uvolněné nebo zkorodované spoje kabeláže.
- Zajistěte dostatečný objemtage supply to the light bars.
If problems persist after following these steps, please contact NAOEVO customer support.
Záruka a podpora
Your NAOEVO LED Light Bar Combo is covered by a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a zajišťuje spolehlivý výkon při běžném používání.
For warranty claims, technical assistance, or any questions regarding your product, please contact NAOEVO customer support through the retailer where the product was purchased or visit the official NAOEVO webstránky pro kontaktní informace.