VECELO Dining Table Set for 4 - Instruction Manual

1. Úvod

This manual provides comprehensive instructions for the assembly, safe use, and proper maintenance of your VECELO 5-Piece Dining Table Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Bezpečnostní informace

• Výrobek vždy sestavujte na měkkém a čistém povrchu, abyste zabránili poškrábání.
• Před použitím se ujistěte, že jsou všechny šrouby a vruty bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
• Nestůjte na stole ani na židlích.
• Během montáže udržujte malé části mimo dosah dětí.
• Rovnoměrně rozložte váhu po povrchu stolu.
• Do not exceed the maximum weight capacities: Table: 180 lbs, Each Chair: 320 lbs.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• 1 x Obdélníkový jídelní stůl
• 4 jídelních židlí
• 1 x Accessory Bag (containing screws, bolts, and tools)
• 1 x Uživatelská příručka (tento dokument)

4. Montážní návod

Follow these steps carefully for proper assembly. It is recommended to have two people for table assembly.

4.1. Sestavení židle

Důležitá rada: When assembling the chair frame, do not fully tighten screws until all parts are loosely connected. This allows for adjustment and proper alignment. Fully tighten all screws once the chair is upright and stable.

1. Step 1: Assemble Chair Frame. Attach the chair leg pieces together using the provided screws. Ensure the front and rear iron support brackets (Parts 6 and 7) are correctly oriented. Part 6 (shorter, 330mm/13") goes on the back side, and Part 7 (longer, 360mm/14") goes near the leg when you sit. Refer to the image for correct placement.
2. Step 2: Attach Seat. Place the chair seat (Part 5) onto the assembled frame. The chair seat is trapezoid-shaped, not square. Ensure the longer side (395mm/15.5") is at the front and the shorter side (355mm/14") is at the back to align with the frame. Secure with screws.
3. Step 3: Attach Backrest. Align the backrest (Part 4) with the upper part of the chair frame. The backrest screw holes and metal frame holes must match correctly. The shorter distance (268mm/10.5") between holes should align with the frame. Secure with screws.
4. Krok 4: Konečné utažení. Once all parts are loosely assembled and correctly aligned, carefully tighten all screws using the provided tool. Do not overtighten.

4.2. Montáž stolu

The table assembly typically involves attaching the legs to the tabletop. Refer to the included instruction sheet for specific diagrams and screw types.

1. Step 1: Prepare Tabletop. Place the tabletop upside down on a soft, clean surface to prevent scratches.
2. Krok 2: Připevněte nohy. Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure each leg using the appropriate screws and bolts from the accessory bag. Do not fully tighten yet.
3. Step 3: Attach Support Brackets (if applicable). If your table includes additional support brackets between the legs, attach them now, ensuring they are correctly oriented.
4. Krok 4: Konečné utažení. Once all legs and supports are loosely attached, carefully turn the table upright. Ensure it is stable and level, then fully tighten all screws and bolts.

5. Používání

This VECELO dining set is designed for indoor use in kitchens, dining rooms, breakfast nooks, or small spaces. The chairs are designed to fit under the table when not in use, optimizing space.

6. Údržba

• Čištění: Otřete povrchy reklamouamp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, které by mohly poškodit povrchovou úpravu.
• Rozlití: Clean up spills immediately to prevent staining, especially on the MDF tabletop.
• Utahování: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability a bezpečnosti.
• Ochrana: Use placemats or coasters to protect the tabletop from heat, scratches, and moisture.

7. Řešení problémů

7.1. Chair Seat and Back Board Assembly Issues

If you encounter difficulties with the chair seat or backrest alignment during assembly, please refer to the following video for detailed troubleshooting tips. Incorrect orientation of parts 6 and 7, or the trapezoid seat, can lead to misalignment.

7.2. Obecné tipy pro montáž

• Špatně zarovnané otvory: If screw holes do not align perfectly, loosen all screws on the affected section, adjust the parts slightly, and then re-tighten. Avoid forcing screws, as this can damage the material.
• Vrátící se stůl/židle: Ensure all screws are fully tightened. If wobbling persists, check that all legs are on an even surface. Slight adjustments to screw tightness can sometimes resolve minor wobbles.
• Chybějící části: Double-check the accessory bag and packaging. If parts are genuinely missing, contact customer support immediately.

8. Specifikace

9. Záruka a podpora

VECELO is committed to providing quality products and customer satisfaction. If you encounter any problems with your product, including missing parts or assembly difficulties, please do not hesitate to contact our customer service team.

E-mail: podpora@vecelo.com

Our technical support team aims to reply within 24 hours.

For information regarding protection plans, please refer to your purchase documentation or the retailer's webmísto.