Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041) User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, Model 562041. This device is designed for enterprise networks requiring efficient and scalable routing solutions with high-powered Power over Ethernet (PoE) capabilities.

2. Bezpečnostní informace

Observe the following safety precautions to prevent damage to the device and injury to personnel:

Zajistěte správné uzemnění zařízení.
Nevystavujte spínač vodě ani nadměrné vlhkosti.
Provozujte zařízení v rámci specifikovaných teplotních a vlhkostních rozsahů.
Use only the power cable provided or a compatible replacement.
Do not open the switch casing; servis svěřte kvalifikovanému personálu.
Zajistěte dostatečné větrání kolem spínače, aby nedošlo k přehřátí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041)
Napájecí kabel
19" rackmount brackets
Gumové nožičky
Pokyny (tato příručka)

4. Konec produktuview

The Intellinet 562041 is a robust Layer 3 managed switch featuring 48 Gigabit PoE+ ports and six 10G SFP+ uplink slots. It supports a total power budget of 850 watts for PoE devices.

4.1 Přední panel

**Obrázek 4.1:** Přední view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the 48 Gigabit Ethernet ports, six SFP+ slots, and LED indicators on the front panel.

Přední panel obsahuje:

48 x 10/100/1000 Mbps RJ45 Ports: These ports support Power over Ethernet Plus (PoE+) for connecting compatible devices.
6 x 10 Gigabit SFP+ Slots: For high-speed uplink connections to other network devices.
LED indikátory: Provide status information for power, system, link activity, and PoE status.
Port konzoly: For local management and configuration.

Close-up of SFP+ and Console ports on the Intellinet switch — **Obrázek 4.2:** Detailní záběr view of the SFP+ uplink ports and the console port on the right side of the switch's front panel. The SYS and PWR LEDs are also visible.

Close-up of LED indicators on the Intellinet switch — **Obrázek 4.3:** Detailní záběr view of the LED indicators (LED MODE, LINK, PoE) located on the left side of the switch's front panel, above the RJ45 ports.

4.2 Zadní panel

**Obrázek 4.4:** Zadní view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the power input and cooling fans.

The rear panel typically includes the AC power input and cooling fans for heat dissipation.

Zadní view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch with warning label — **Obrázek 4.5:** Zadní view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, highlighting the power input, cooling fans, and a warning label regarding proper grounding.

5. Nastavení

5.1 Fyzická instalace

The switch can be installed in a standard 19-inch equipment rack or placed on a desktop.

Instalace do racku: Attach the provided rackmount brackets to the sides of the switch using the included screws. Secure the switch into a standard 19-inch rack.
Instalace na plochu: Attach the provided rubber feet to the bottom of the switch to prevent scratching and ensure stability. Place the switch on a flat, stable surface.

5.2 Připojení napájení

Connect the provided power cable to the AC power input on the rear panel of the switch and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting the power cable.

5.3 Síťová připojení

PoE zařízení: Connect PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points) to any of the 48 Gigabit RJ45 ports. The switch will automatically detect and provide power to these devices.
Uplink připojení: Insert compatible SFP+ transceivers into the 10 Gigabit SFP+ slots and connect them to your core network or other high-speed devices using appropriate fiber optic cables.
Připojení konzole: For initial configuration or direct management, connect a console cable from your computer to the console port on the switch.

5.4 Počáteční konfigurace

Refer to the separate software configuration guide for detailed instructions on accessing the switch's management interface (web-based GUI or command-line interface via console port) and performing initial setup, including IP address assignment, user accounts, and basic network settings.

6. Návod k obsluze

6.1 Layer 3 Routing

This switch offers dynamic Layer 3 IP routing capabilities, including OSPF (Open Shortest Path First), RIP (Routing Information Protocol), and VRRP (Virtual Router Redundancy Protocol). These protocols enable efficient and scalable routing within complex network environments.

Diagram illustrating Layer 3 features like OSPF, RIP, VRRP, 6x10G SFP+, and 850W PoE — **Obrázek 6.1:** Nadview of the switch's Layer 3 capabilities, including OSPF, RIP, VRRP, 6x10G SFP+ uplinks, and an 850W PoE budget.

6.2 Napájení přes Ethernet (PoE+)

The switch provides up to 30 watts of power per port across its 48 PoE+ ports, with a total power budget of 850 watts. This allows for seamless integration of various PoE devices without the need for separate power adapters.

Diagram showing power consumption examples for various PoE devices — **Obrázek 6.2:** Examples of power consumption for various PoE devices, categorized by 802.3af (15W), 802.3at (30W), and 802.3bt (60W, 90W) standards.

6.3 PoE Scheduling

The switch supports PoE scheduling, allowing administrators to define specific times for powering on, powering off, or rebooting connected PoE devices. This feature can optimize power consumption and enhance network security.

Diagram illustrating PoE scheduling for various devices — **Obrázek 6.3:** Illustration of PoE scheduling, showing how power can be scheduled to turn off, reboot, or turn on for different devices on specific days and times.

PoE scheduling timeline example — **Obrázek 6.4:** A timeline example demonstrating how PoE scheduling can save power by turning off devices during non-business hours.

6.4 Self-Healing Functionality (PDM)

The Powered Device Monitor (PDM) feature enables the switch to proactively monitor the status of connected PoE devices. If a device becomes unresponsive, the PDM can automatically restart the PoE port to restore functionality, minimizing downtime and maintaining network integrity.

6.5 Správa cloudu

The switch supports cloud management capabilities, allowing for remote configuration, monitoring, and troubleshooting of the device from a centralized platform. Refer to the cloud management documentation for setup and usage details.

7. Údržba

7.1 aktualizací firmwaru

Regularly check the Intellinet Network Solutions website for the latest firmware updates. Applying firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

7.2 Čištění

To clean the switch, power it off and disconnect all cables. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.

7.3 Environmentální hlediska

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in direct sunlight, near heat sources, or in areas with high dust accumulation.

8. Řešení problémů

This section addresses common issues you might encounter with the switch.

8.1 Bez napájení

Verify the power cable is securely connected to both the switch and a working electrical outlet.
Ujistěte se, že je vypínač na zadním panelu v poloze ON.
Zkontrolujte funkčnost zásuvky pomocí jiného zařízení.

8.2 Žádné spojení na portu

Check the Ethernet cable connection at both ends. Ensure it is securely plugged in.
Verify the cable is not damaged. Try a different cable.
Ujistěte se, že připojené zařízení je zapnuté a funguje správně.
Zkontrolujte stav portu v rozhraní pro správu přepínače.

8.3 Zařízení PoE nepřijímá napájení

Confirm the connected device is a PoE-compatible device.
Zkontrolujte stavovou LED diodu PoE pro daný port.
Verify the total PoE power budget (850W) is not exceeded by all connected devices.
Utilize the Powered Device Monitor (PDM) feature to automatically restart the port if the device is unresponsive.
Check PoE settings in the switch's management interface.

9. Specifikace

Funkce	Specifikace
Číslo modelu	562041
Značka	INTELLINET NETWORK SOLUTIONS
Počet portů	54 (48× gigabitový PoE+, 6× 10G SFP+)
Typ rozhraní	PoE, SFP
Maximální výkon (rozpočet PoE)	850 wattů
Rychlost přenosu dat	10 Gigabits Per Second (SFP+ uplinks)
Hmotnost položky	6.2 kilogramů (13.64 liber)
Rozměry produktu (D x Š x V)	13.78 x 17.32 x 1.73 palce
Hodnocení vyšší teploty	104 stupňů Fahrenheita (40 °C)
Nižší teplotní hodnocení	32 stupňů Fahrenheita (0 °C)
Kompatibilní zařízení	Desktop, Router, PoE devices (IP cameras, VoIP phones, WAPs)
Zahrnuté komponenty	19" rackmount brackets, Instructions, Rubber feet, power cable
UPC	766623562041

10. Záruka a podpora

10.1 Informace o záruce

This Intellinet Network Solutions product is covered by a 3letá záruka výrobcePro případné reklamace si prosím uschovejte doklad o koupi. Záruka se vztahuje na vady materiálu a zpracování při běžném používání.

10.2 Technická podpora

For technical assistance, product documentation, or to register your product, please visit the official Intellinet Network Solutions webnebo kontaktujte jejich zákaznickou podporu. Kontaktní informace obvykle naleznete na webových stránkách výrobce webmístě nebo na obalu produktu.

INTELLINET NETWORK SOLUTIONS 562041